A star loses 6.022×10²³ mass per second. The total mass of the star is 12.044×10⁴⁶ in how much time will the star lose all its mass.

please helpp!!!!​

newton is the S.I. unit of force.

dyne is the C.G.S. system of force.

[tex]{ \blue{ \tt{newton = kg {m}^{ - 2}}}}[/tex]

[tex]{ \blue{ \tt{dyne = gcm {s}^{ - 1}}}} [/tex]

[tex]{ \red{ \sf{ \frac{newton}{dyne}}}} = { \green{ \sf{ \frac{10 { \cancel g^{2}} \times 10 { \cancel{cm^{3}}} }{ \cancel{gcm}}}}}[/tex]

[tex]{ \red{ \sf{ \frac{newton}{dyne} }}}= { \boxed{ \purple{ \sf{{10}^{5} \: dyne}}}}[/tex]

Answer:

Explanation:

1 Newton = 100,000 dynes

F = m·a

[ F ] =  1 N = 1 kg · 1 m/s² = 1000 g · 100 cm/c² = 1000·100 g·cm / s²

= 100,000 g·cm / c² =  100,000 dines

The appropriate object category are:

Red giant or super giant → very cool but very luminous→ found in the upper right of the H-R diagram, then

Main sequence stars →The majority of stars in our galaxy→ Sun →for example a very hot and very luminous star, then

White dwarfs → very hot but very d→ not much larger in radius than earth.

Giant:

When  stars run out of their fuel that is hydrogen for the nuclear fusion reactions then they would convert into the Giant stars. main sequence stars.

Main Sequence:

Stars are called main sequence stars when their core temperature reaches up to 10 million kelvin and their start the nuclear fusion reactions of hydrogen into helium in the core of the star.

White dwarfs:

When the stars run out of their fuel then they actually shed the outer layer planetary nebula, the remaining core part that remain behind is called as white dwarf.

To know more about stars, visit here:

https://brainly.com/question/24493066

#SPJ4

Answer:

Renewable Energy took a test on this not to long ago!

PLEASE GIVE BRAINLIEST THANK YOU!!!

Answer:

he surface area of the bottom of his foot is 3.2 m2.

Explanation:

Answer: 92

Explanation:

equation : x+7=99

here, we need to get x alone so we subtract 7 from both sides

x +7-7 = 99 -7 on the left side of the equation the 7s cancel out

x=92

Answer:

below

Explanation:

If it went for 360° it would swing through the ENTIRE circumference = 2 pi r

     = 2 pi ( .8 ) =5.026 m

 but it only swings through 45   of the 360

      45 / 360    *  5.026 = .63 m

Range and Maximum height are proportional to the square of the initial velocity.

In projectile motion, Range of the particle is the horizontal distance travelled by the projectile between launch and the landing points and is denoted as R,

R = u^2sin2θ/g

Here u is initial velocity.

Maximum height is the maximum height from the point of projection, a projectile can reach.

And at maximum height (h) attained, velocity of the object is zero (v=0)

we can use , v^2 - (u sinθ)^2= 2ah     (acceleration due to gravity is a= -g)

Or 0 -  (u sinθ)^2 = 2(-g)h

⇒ h = u^2 sin^2 θ / 2g

To know more about projectile motion here

https://brainly.com/question/11261462

#SPJ1

Answer:

Angular displacement  ≈  54 rad

Explanation:

Given:

φ₀ = 0

ω₀ = 15 rad/s

ω = 0

t = 7.2 s

___________

φ - ?

Rotational motion equation:

φ = φ₀ + ω₀·t + ε·t² / 2

Angular acceleration:

ε = (ω - ω₀) / t = ( 0 - 15 ) / 7.2 ≈ - 2.08 rad/s²

Angular displacement :

φ = φ₀ + ω₀·t + ε·t² / 2 = 0 + 15·7.2+ (-2.08)·7.2² / 2 ≈  54 rad

The loss in the gravitataional potential energy is obtained as  7.056 * 10^9 J and this energy is converted to  the kinetic energy of the moving aircraft.

The term gravitational potential energy has to do with the energy that is possessed by a body by virtue of its position. Thus it has to do with the height of the object. The greater the height, the more the gravitational potential energy.

Now;

E = mgh

m = mass of the object

g = acceleration due to gravity

h = height of the object

Thus;

The loss in the gravitational potential energy is obtained from;

80,000 * 9.8 (10,000 - 1000)

= 7.056 * 10^9 J

Learn more about gravitational potential energy:https://brainly.com/question/19768887

#SPJ1

Answer:

4.44 N

Explanation:

10 = G m1 m2 / r^2      G    m1   and m2 are constant   so:

10 = k /r^2

10 = k / (.30^2 )

.9 = k              now increase to  .45

F = .9 / (.45^2)    =   4.44 N      

[tex]{ \red{ \underline{ \green{ \sf{solenoid}}}}}[/tex]

Solenoid is a coil of circular turns made up of insulated copper wire wrapped closely in the cylindrical form

solenoid is formed by circular turns of copper wire in cylinder form

0.0135 cm distance  is the maximum compression of the spring.

mass=0.1 kg

velocity=2.3 m/s = 230 cm/s

spring constant, k= 1700 N/m

F=Kx

x=F/k

x=ma/k

x=0.1×230÷ 1700

x= 0.0135 cm

Distance is the length between two locations or things, independent of direction. Since distance is a scalar property, it only takes into consideration the total magnitude and ignores the start and finish positions. Since distance is a scalar attribute, it can only have a positive or zero value; it cannot have a negative value.

The most common unit of measurement for distance is the meter (m), while larger distances can also be stated in kilometers (km), while smaller distances can be expressed in centimeters (cm) or millimeters (mm). When calculating distance, the letter D is often used to represent the distance traveled.

To know more about  distance visit : brainly.com/question/12626613

#SPJ1

13.23 joule is gravitational potential energy of the mass when the clock is wound.​

potential energy, p = mgh

m= 0.750 kg

h= 1.80 m

g=9.8 m/s²

p = mgh

p=0.750×1.80 m×9.8 m/s²

p=13.23 joule

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy. It is capable of performing more work when raised. Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has greater potential energy as they get further apart.

Potential energy develops in systems having components whose configurations, or relative positions, determine the amount of the forces they apply to one another.

To know more about   potential energy visit : brainly.com/question/28988147

#SPJ9

Answer:

Explanation:

m₁ = m₂ = m

m₁' = 2m₁ = 2m

m₂' = 2m₂ = 2m

F₁₂ = G·m₁·m₂ / D² = G·m² / D²

F'₁₂ = G·m'₁·m'₂ / D² = G·2m·2m / D² = 4·G·m²/ D = 4·F₁₂

Gravitational pull increased 4 times

Answer:

b. 4750 N

Explanation:

F = ma

F = (1500)(3)

F = 4500 N

Force Total = Fa - Ff

4500 = Fa - 250

Fa = 4750 N

Hydrogeological maps bring basic geological information together with data on the hydraulic and hydrochemical characteristics of the rocks and their usefulness for groundwater supply.

The main consequence of forming jovian planets starting with extra mass from hydrogen compounds is that the jovian planets was cold enough for hydrogen compounds to condense into ices. This cause them to grow to large size.

Jovian planets formed in the outer solar system, farther from the sun where ices and rocks were plentiful. The cores accreted rapidly into large clumps of ice and rocks. Jovian planets was cold enough for hydrogen compounds to condense into. Eventually, they become so large, they captured a large amount of hydrogen and other gases from the surrounding nebula with their enormous gravity. The atmosphere of the Jovian planets in our solar system are made mostly of hydrogen and helium compounds and containing hydrogen are--water, ammonia, and methane.

To learn more about Jovian planets, visit---

https://brainly.com/question/13105744

#SPJ4

(a) The length of the spring just as the box is ready to move is 5.1cm

(b) The length of the spring when it is pulled forward at a constant velocity of 1.75 m/s is 47.0 cm

(c) The length of the spring when it is pulled forward at a constant velocity of 2.75 m/s is 73.8 cm

The length of the spring just as the box is ready to move is calculated by applying the principle of conservation of energy.

work done by static friction = elastic potential energy of the spring

μmgx = ¹/₂kx²2

μmg = kx

x = 2μmg/k

where;

k is spring constant  = 2.5 N/cm x 100 cm/m = 250 N/mμ is coefficient of static friction

g is the acceleration due to gravity

x is an extension of the spring

x = 2μmg/kx = (2 x 0.65 x 18 x 9.8) / 250x

= 0.051 m

x = 5.1 cm.

The length of the spring when it is pulled forward at a constant velocity of 1.75 m/s.elastic potential energy of spring  = kinetic energy of the box

¹/₂kx² = ¹/₂mv² kx² = mv² x²

= mv²/kx

= √(mv²/k)

where;

m is the mass of the box

v is the speed of the box

x is the length of the spring

x = √(18 x 1.75²/250)x = 0.470 mx = 47.0 cm

The length of the spring when it is pulled forward at a constant velocity of 2.75 m/s.x = √(mv²/k)x = √(18 x 2.75²/250)

x = 0.738 m

x = 73.8 cm

Learn more about length of spring here:

https://brainly.com/question/28615861

#SPJ1

Radio waves and microwaves have A.)low frequency and long wavelength.

Microwaves are classified as radio waves, but they have higher frequencies than other radio waves. And so with higher frequencies, they also have more energy. That's is the reason, microwaves are useful for heating food in microwave ovens.

Microwaves have a long wavelength, but not as long as radio waves. The  atmosphere of earth is transparent to some wavelengths of microwave radiation. The longer wavelengths pass through the atmosphere of earth more easily than the shorter wavelength microwaves.

Radio waves have photons with the low energies and microwaves have more energy as compared to radio waves.

To know more about radio and microwaves, refer

https://brainly.com/question/1959549

#SPJ1

Answer:

Explanation:

If the electric field is inhomogeneous, then the magnitude of the strength (and voltage) is determined by the density of the field lines: where the field lines are thicker, the field strength is greater

Answer: im looking

explination

Based on the acceleration due to gravity of the object at that point, the distance from the center of the object is 1.54 * 10⁷ m

The distance from the center of the object is calculated using the formula below:

g' = g(r/h)²

where;

g' is the acceleration due to gravity at that point

g is the acceleration due to gravity from the surface of the earth = 9.81 m/s²

r is the radius of the earth = 6.37 * 10⁶ m

h = is the distance away from the center of the earth

The acceleration due to gravity at that point is found using the formula below

F = mg'

g' = F / m

where m is mass

F is force

g' = 150 / 90

g' = 1.67 m/s²

h = r / (√g'/g)

h = 6.37 * 10⁶ / (√1.67/9.81)

h = 1.54 * 10⁷ m

Learn more about acceleration due to gravity at: https://brainly.com/question/88039

#SPJ1

A prototype is the best example or representation of a concept, which is used as a design to shape a device.

A prototype can be defined as a given design in its experimental stage which is very useful to shape the framework or idea to carry out.

Therefore, with this data, we can see that a prototype can be very useful to shape an idea or concept about a given device in particular.

Complete question:

Fill in the blank. A _____ is the best example or representation of a concept.

Learn more about a prototype here:

https://brainly.com/question/27896974

#SPJ1

Answer:

1. B (graph A) 2. A (graph D) 3. D (graph B) 4. C (graph C)

Explanation:

1. Graph A gives the relationship between the speed of a car and time. Over time, the speed of the car is decreasing (moving closer to 0). Therefore, the car is slowing down.

2. Graph D gives the relationship between the distance of a car and time. Over time, the distance the car has traveled is increasing at a steady rate. Because the distance is changing, we know the car is moving. And because the slope of the line is constant, the car is moving at a constant speed.

3. Graph B gives the relationship between the distance of a car and time. This distance is not changing over time, meaning that if the car started 5 meters away, the car is still 5 meters away. Therefore, the car is not moving.

4. Graph C gives the relationship between speed and time. The speed is increasing, and therefore not constant. This means that the car is either speeding up or slowing down. Since speed is increasing (the inverse of graph A), we know the car is speeding up. When an object is speeding up, the velocity/speed and the acceleration have the same sign (both positive or negative). Our speed values are all positive, so our acceleration must also be positive.

Answer:

See below

Explanation:

For a right triangle, remember that tan = opposite leg / adjacent leg:

The angle will be found by using the inverse tangent function

arctan ( .3/1.4)  = 12°

The measure of the angle, in degrees, between the resultant and the 1.40-kilometer displacement vector is 12.

In physics, a vector is a quantity with both magnitude and direction. It is often represented by an arrow whose length is proportional to the magnitude of the quantity and whose direction is the same as that of the quantity.

A vector does not have position, while having magnitude and direction. In other words, a vector's shape is unaltered if it is shifted parallel to itself as long as its length is unaltered.

Ordinary quantities with a magnitude but no direction are referred to as scalars in contrast to vectors. For instance, while speed (the amount of velocity), time, and mass are scalars, displacement, velocity, and acceleration are vector quantities.

Therefore, The measure of the angle, in degrees, between the resultant and the 1.40-kilometer displacement vector is 12.

To learn more about vectors, refer to the link:

https://brainly.com/question/13322477

#SPJ2

Answer:

55m east of the sign post

Explanation:

Use this equation

final velocity^2 = initial velocity^2+2(a)(x) x is displacement.

Substitute values:

25^2= 15^2+ 2(4)(x)

625=225+8x

x=50 m

REMEMBER TO ADD INITIAL DISPLACEMENT!!!! :D

Displacement (positive is east in this case)

=50 m+ 5m

=55m.

So the answer is the motorcyclist is 55m east of the sign post.

The power expended by the athlete is determined as 6,242.6 J/s.

The average power of an object can be defined as the proportion of overall work or activity performed by the body to the total time spent by the body.

The unit of average power is watt or joules per second.

Average power is calculated by dividing total energy spent by the total time taken.

Mathematically, the formula for average power is written as;

P = Energy / time

The work done by the athlete or the gravitational potential energy of the weight lifted by the athlete to the given height is calculated as follow;

Energy = P.E = mgh

where;

Energy = 130 x 9.8 x 2.45

Energy = 3121.3 J

Power = 3121.3 J / 0.5 s

Power = 6,242.6 J/s

Learn more about power here: https://brainly.com/question/20137708

#SPJ1

The statement indicating that the specific heat of a gas can be measured at constant pressure is accurate when discussing specific heat (Option B).

The specific heat of a gas is a measurement that makes reference to the relative molecular position of the molecules in a substance in the gas state, which is a state of matter where particles are more separated in space when compared with liquid and solid states.

Moreover, specific heat can be defined as the amount of heat energy that may be able to increase the temperature of 1 gr (gram) of a given material to 1 Celssius degree.

Therefore, with this data, we can see that the specific heat of a gas depends on the temperature and it expresses a given amount of heat energy in a substance or material.

Learn more about the specific heat here:

https://brainly.com/question/27991746

#SPJ1

The change in momentum of the ball that is kicked by a force of 240 N over a time interval of 0.25 s is 60 Ns.

Change in momentum can be defined as the product of force and time.

To calculate the change in momentum of the ball, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Henece, the change in momentum of the ball is 60 Ns.

Learn more about Change in momentum here: https://brainly.com/question/8618043

#SPJ1