The force (lb) required to fu compress the spring is most nearly 71.
To find the force required to fully compress the spring, we can use the formula for the spring force:
F = kx
where F is the force applied, k is the spring constant, and x is the displacement from the free length.
First, let's find the mean diameter of the spring:
d = 0.1055 in.
The mean diameter is the average of the wire diameter and the diameter of the coil, so:
mean diameter = d + 10/3 * d = 1.485 in.
Next, let's find the spring constant:
k = 20 lb/in.
Finally, let's find the displacement from the free length when the spring is fully compressed:
total length of spring = 3 in. + 10 coils * mean diameter = 18.85 in.
fully compressed length of spring = total length of spring - 10 coils * wire diameter = 15.39 in.
displacement from free length = 3 in. - 15.39 in. = -12.39 in.
Note that the negative sign indicates that the displacement is in the opposite direction of the spring's natural length.
Now we can use the formula for spring force to find the force required to fully compress the spring:
F = kx = 20 lb/in. * (-12.39 in.) = -247.8 lb.
The negative sign indicates that the force is in the opposite direction of the applied force, so the actual force required to compress the spring is:
F = |-247.8 lb.| = 247.8 lb.
Learn more about force here:
https://brainly.com/question/26115859
#SPJ11
T/F suppose instr1 is fetched in stage 1. instr1 then proceeds to stage 2, reg read. in a pipelined implementation, can instruction2 be fetched simultaneously with that reg read.
True, in a pipelined implementation, instruction2 can be fetched simultaneously with the register read of instruction1. This is because pipelining allows multiple instructions to be executed at different stages concurrently, thus improving the overall performance and throughput of the processor.
True, in a pipelined implementation, instruction2 can be fetched simultaneously with the reg read of instruction1. This is because pipelining allows for multiple instructions to be executed concurrently by breaking down the instruction processing into multiple stages. Each stage can handle a different instruction, allowing for overlapping of instruction processing and thus increasing overall performance.
Learn more about processor here:-
https://brainly.com/question/28902482
#SPJ11
A bus-organized CPU has registers with 24 bits each, an ALU and a destination decoder The control word is given below.a. How many multiplexers in the A-B buses, and what is the size of each multiplexer BUS A BUS B Multiplexer inputs to output_______ ______ _____________________b. If the data transfer from each register to MUXA-25 ns and MUXB-25 ns and ALU needs 45 ns to produce an output, what is the total time needed to output the result of an operation that needs data from registers? Total time ______c. If the decoder is removed and replaced with logical 1, what is the effect of this change and does the operation give the correct result? Select the correct answer from the followingSelectioin____ a. The result is correct but all registers lose their initial values b. The result is incorrect and the first register loses its initial value c. The result correct and only the first register loses its initial value d. The result is incorrect and all registers retain their initial values. e. The result is incorrect and all registers lose their initial values b-
a. In a bus-organized CPU with 24-bit registers, there will be two multiplexers, one for each bus (A and B). Since there are 24-bit registers, each multiplexer will have a size of 24:1. Therefore, the number of multiplexers in A-B buses is 2, and the size of each multiplexer is 24:1.
b. To calculate the total time needed to output the result of an operation that needs data from registers, you need to sum up the time taken by each stage. For data transfer from each register to MUXA and MUXB, it takes 25 ns. The ALU needs 45 ns to produce an output. Therefore, the total time needed is 25 ns (MUXA) + 25 ns (MUXB) + 45 ns (ALU) = 95 ns.
c. If the decoder is removed and replaced with logical 1, the result will be incorrect, and the first register will lose its initial value. Therefore, the correct answer is:
Selection c. The result is correct, and only the first register loses its initial value.
to know more about registers:
https://brainly.com/question/16740765
#SPJ11
______________allow you to segregate a country into different areas. For example, you might use zones to specify states for America, provinces for China, etc. ,________________ on the other hand, allow you to segregate different geographical areas according to how you conduct business
Which statement is not true?
Using your own pre-sized images to bypass the auto-scaling process to minimize wasted download capacity and improve page loading times for your customers
Auto-scaling of images can result in images with less than optimum file sizes and thus consume precious bandwidth.
A pre-sized image can result in images with less than optimum file sizes and thus consume precious bandwidth.
With pre-sized images, you also exert greater control over the exact resolution and size of the images that you want your customers to see.
[x] ________________are internationally recognized abbreviations of country codes
What is the purpose of the zone definition? (select all answers that apply)
Zone definition allows you to restrict product customization for customers from a specific area in the world.
Zone Definition allows you to specify a specific tax rate for customers from a specific location in the world.
Zone definition allows you to restrict customer login from a specific area in the world.
Zone Definition allows you to restrict a shipping or payment option only to customers from a specific area in the world.
Zone definition allows you to restrict discount coupons for customers from a specific area in the world.
_____________ is the relationship between merchant and government and it defines the state where the merchant is expected to collect sales tax.
Nexus
Tax Rate
Zone Definition
Tax Class
What is valid?
Tax rate ties together buyer's shipping address and payment to trigger the different rate of a sales tax.
A Tax Class allows one group for all product so that every product can be taxed the same rate
Tax rate ties together the information you have defined for a Zone Definition and a Tax Class to trigger the different rate of a sales tax.
Tax class defines the percentage of a product’s retail price or shipping charges that should be collected as different rate.
"Segments" allow you to segregate a country into different areas, such as states for America and provinces for China. "Classes", on the other hand, allow you to segregate different geographical areas according to how you conduct business.
The statement that is not true is: A pre-sized image can result in images with less than optimum file sizes and thus consume precious bandwidth.
"Country codes" are internationally recognized abbreviations of country codes.
The purposes of the zone definition are:
- Zone definition allows you to restrict product customization for customers from a specific area in the world.
- Zone Definition allows you to specify a specific tax rate for customers from a specific location in the world.
- Zone definition allows you to restrict customer login from a specific area in the world.
- Zone Definition allows you to restrict a shipping or payment option only to customers from a specific area in the world.
- Zone definition allows you to restrict discount coupons for customers from a specific area in the world.
"Nexus" is the relationship between merchant and government and it defines the state where the merchant is expected to collect sales tax.
The valid statement is: Tax rate ties together the information you have defined for a Zone Definition and a Tax Class to trigger the different rate of a sales tax.
To know more about Segments
https://brainly.com/question/17107345?
#SPJ11
how will the results of lines two and three compare?
filter=df['age']=='30'
print(df[filter])
print(df.loc[filter,:])
Select an answer:
They will both print the exact same results.
They will both fail with a syntax error.
The first call will only print the rows.
The second call will only print true or false messages.
They will both print the exact same results.
Explanation:
Both lines two and three are filtering the pandas dataframe 'df' for rows where the 'age' column is equal to '30'. The first call uses 'df[filter]' while the second call uses 'df.loc[filter,:]'.
In line two, the 'filter' variable is assigned a boolean series of 'True' and 'False' values corresponding to whether each row in the 'age' column is equal to '30'. Then, this filter is passed to the DataFrame 'df' using the indexing operator '[]', which returns all rows of 'df' where the filter is 'True'.
In line three, the same 'filter' is applied using the '.loc' accessor, which allows selecting rows and columns of a DataFrame by label-based indexing. In this case, the 'filter' is used to select all rows (':') where the 'age' column is equal to '30'.
In both cases, they will produce the same results, displaying the rows in the dataframe that meet the filter condition.
Learn more about pandas dataframe 'df':
https://brainly.com/question/30403325
#SPJ11
______is the reverse analysis of an old application to conform to a new methodology, usually Information Engineering or object orientation. Select one: a. Reengineering b. Reverse engineering c. Restructuring d. Rebuilding
Answer: b. Reverse engineering
can the highway system accommodate a north–south flow of 7,000 vehicles per hour? no maximum flow of vehicles per hour = fill in the blank 50
Based on the information provided, it is unclear if the highway system can accommodate a north-south flow of 7,000 vehicles per hour without a maximum flow of vehicles per hour specified. However, if we assume that the maximum flow of vehicles per hour on the highway system is 50.
It's not possible to determine if the highway system can accommodate a north-south flow of 7,000 vehicles per hour based solely on the given information.The fact that there is no maximum flow of vehicles per hour mentioned doesn't provide enough context to make a conclusion. We would need to know the capacity of the highway, the current traffic volume, the number of lanes, the speed limit, and other factors to determine if the system can handle an additional 7,000 vehicles per hour.Therefore, we cannot fill in the blank with any specific number based on the given information.
To learn more about vehicles click the link below:
brainly.com/question/24745369
#SPJ11
here in Denver the atmospheric pressure is usually around 12.1 psi. The pump manufacturers specification is 5 in. He. Since one inch of mercury is approximately a half psi, we have plenty of pressure to work with. (clarify this erroneous statement).-S 7o 23 exercise operation at the suction side of a pump 50 points INSTRUCTIONS: Cormment on the following statements 1. STATEMENT We cavitated four purnmps to death before we found the crack in the suction line. (Explain the difference between cavitation and the situation described by the statement) Carv, tahin. s the fo wahn and collapse of gaseous cavities 2 STATEMENT Here in Denver, the atmospheric prossure is usually around 12.1 psla (0.8 bar). The pump manufacturers specfication is 5 in.Hg. (0.17 ban, Since one inch of morcury is approximately a half psi, wo have plenty of pressurs to work with. (Clarify this erroneous statement) You usill b 1 in H over pump manulactun specs. , STATEMENT I dont understand whats wrong with my pump, It makes a high shrieking sound. And, I dont get the flow hat is stated in the manufacturers catalog. I thought the pump might not be dovoloping onough vacuum, so I chocked the vacuum with a gage. The gage reads 24 (0,01 bar) and the pump catalog says I only need 6 0 204 bar), (Whats happening to the pump? Clarily the last sontonce in the statoment) indicaton cavita onSultaneus collaspe o 4, STATEMENT purchasing bought a different brand of pump and it cavitated right off tho bat. We cant determine why. since the flow rate tirough the suction line is exadily the samo, Whats the problom?) cor suedl in desig n or ncovrect sud viscesily 6 STATEMET ByrSS our hachines were leaking like crazy so we switched to a heavier oil. Now the pump is nolsy and doosnt last 1o0 oo long ither (Whats happening to the pump and what caused the eiluation?)
Cavitation is the formation and collapse of gaseous cavities, while the situation described in the statement is a crack in the suction line.
1. Cavitation occurs when there is low pressure at the suction side of the pump, causing the formation of bubbles that collapse when they reach the high-pressure area, causing damage to the pump.
2. The statement is incorrect because the pressure unit of inches of mercury (in. Hg) cannot be directly converted to pressure units of psi or bar. However, if the pump manufacturer's specification is in inches of mercury, it can be converted to pressure units using a conversion table. If the atmospheric pressure is higher than the manufacturer's specification, it may be necessary to reduce the pressure at the suction side of the pump to avoid damage from cavitation.
3. The high shrieking sound and lower flow rate indicated by the gauge could be due to cavitation, as indicated by the last sentence of the statement. The pump may not be able to handle the required flow rate due to the low pressure at the suction side caused by cavitation. The pressure at the suction side may need to be increased or the pump may need to be replaced with one that can handle the required flow rate.
4. The problem with the pump could be due to design issues or incorrect suction line sizing, which can cause cavitation. The flow rate through the suction line may be the same, but if the pump is not designed to handle the specific conditions of the system, it can lead to cavitation and damage to the pump.
5. The heavier oil may be causing the pump to make noise and not last as long because it may be too thick for the pump and not providing adequate lubrication. The heavier oil may also be causing increased resistance, which can lead to overheating and damage to the pump. A lighter oil or one that is recommended by the pump manufacturer should be used instead.
Learn more about flow rate :
https://brainly.com/question/19863408
#SPJ11
Assume the risk-free rate is zero. What is the risk-neutral probability of that the stock price will be $36? A. 0.6 B. 0.5 C. 0.4 D. 0.3, 3.
To determine the risk-neutral probability of the stock price being $36, we need to use the following formula: p* = (1 + r - d - u) / (u - d)
where p* is the risk-neutral probability, r is the risk-free rate (assumed to be zero in this case), d is the downward factor of the stock price, and u is the upward factor of the stock price.
We need to determine the values of d and u from the information given. Let S0 be the current stock price, and let Su and Sd be the stock prices after an upward and a downward movement, respectively. We have:
Su / S0 = 1 + u
Sd / S0 = 1 - d
We also know that the stock price can either go up by 20% or down by 10%, so we have:
u = 0.20
d = 0.10
Substituting these values into the formula for p*, we get:
p* = (1 + 0 - 0.10 - 0.20) / (0.20 - 0.10) = 0.3
Therefore, the risk-neutral probability of the stock price being $36 is 0.3, or option D.
Learn more about risk-neutral probability here:
https://brainly.com/question/23639763
#SPJ11
Consider a uniform open channel flow that can be classified as a "wide rectangular channel". If the flow depth increases by 9.5 times, and flow remains uniform, by what factor will the flow rate increase? Your Answer: Answer
The flow rate will increase by a factor of 9.5 when the flow depth increases by 9.5 times in a wide rectangular channel with uniform flow.
To determine the factor by which the flow rate will increase in a wide rectangular channel when the flow depth increases by 9.5 times, we can use the following steps:
Step 1: Understand that for a wide rectangular channel, the flow rate (Q) can be calculated using the formula Q = vA, where v is the flow velocity and A is the flow area.
Step 2: The flow area (A) in a wide rectangular channel can be calculated as A = yb, where y is the flow depth and b is the channel width.
Step 3: Since the flow depth (y) increases by 9.5 times, the new flow area (A') will be A' = 9.5yb, as the channel width (b) remains constant.
Step 4: We know that the flow remains uniform, which implies that the flow velocity (v) remains constant.
Step 5: Calculate the new flow rate (Q') using the new flow area (A') and the constant flow velocity (v). Q' = vA' = v(9.5yb).
Step 6: Compare the new flow rate (Q') with the original flow rate (Q) to determine the factor by which the flow rate will increase. Since Q = vyb, we have Q' = 9.5Q.
You can learn more about flow rate at: brainly.com/question/27880305
#SPJ11
what is the surface modification factor value for each of the materials? the surface modification factor value for the 4340 steel is . the surface modification factor value for the 1040 steel is
The surface modification factor value for a material refers to the degree to which the surface of the material has been altered or modified to enhance its properties. This can include treatments such as coatings, plating, and heat treatments.
In the case of 4340 steel, the surface modification factor value is relatively high.
for such more questions on factor value
https://brainly.com/question/25543272
#SPJ11
(T/F) Air entrainment is an admixture that is added to a concrete mix to decrease the shrinkage of the concrete.
True. Air entrainment is an admixture that is added to concrete mixes to increase the durability and workability of the concrete. It helps reduce the potential for cracking and damage due to freeze-thaw cycles.
It can also improve the overall strength and stability of the concrete. By introducing small air bubbles into the mix, air entrainment can help decrease the shrinkage of the concrete and make it more resistant to damage over time. Overall, air entrainment is a useful tool for creating high-quality, long-lasting concrete structures.
Water expands by around 9% whenever it freezes. Pressure is created in the freeze-thaw cycles concrete's pores as a result of the water in moist concrete freezing. The expansion, cracking, scaling, and crumbling of damp concrete can eventually be brought on by freeze-thaw cycles, aggregate disruption, and other factors.
Learn more about freeze-thaw cycles here
https://brainly.com/question/11418254
#SPJ11
how many ffs are needed to make a register that counts from 0 to 255?
To make a register that counts from 0 to 255, you need 8 flip-flops (FFs).
To determine how many flip-flops (FFs) are needed to make a register that counts from 0 to 255, we need to consider the binary representation of the numbers.
Step 1: Identify the highest number to be represented, which is 255 in this case.
Step 2: Convert the highest number to its binary representation. The binary representation of 255 is 11111111.
Step 3: Count the number of bits in the binary representation. In this case, there are 8 bits.
Therefore, to create a register that counts from 0 to 255, we would need 8 flip-flops (FFs).
Learn more about flip-flops: https://brainly.com/question/27994856
#SPJ11
show that the following two statements are equivalent: (a) the running time of algorithm a is always o(f(n)). (b) in the worst case, the running time of algorithm a is o(f(n)).
To show that (a) and (b) are equivalent, we need to prove that if (a) is true, then (b) must also be true, and vice versa.
First, let's assume that (a) is true, meaning that the running time of algorithm a is always o(f(n)). This means that for any input size n, the running time of the algorithm is bounded by some function g(n) such that g(n) is in the set of functions that are o(f(n)). In other words, the algorithm never takes longer than a certain amount of time that grows slower than f(n).
Now, let's consider the worst case running time of algorithm a. By definition, this is the running time for the input size that causes the algorithm to take the longest amount of time to execute. Since we know that the running time is always bounded by a function that grows slower than f(n), we can say that the worst case running time is also bounded by a function that is o(f(n)). Therefore, we have shown that if (a) is true, then (b) must also be true.
Conversely, let's assume that (b) is true, meaning that in the worst case, the running time of algorithm a is o(f(n)). This means that there exists some function g(n) in the set of functions that are o(f(n)) such that the worst case running time of the algorithm is bounded by g(n).
Since the worst case running time is always the longest possible running time for any input size, we can conclude that the running time of the algorithm is also bounded by g(n) for all other input sizes. Therefore, the running time of algorithm a is always o(f(n)). Hence, we have shown that if (b) is true, then (a) must also be true.
In summary, we have proved that (a) and (b) are equivalent, meaning that they both describe the same property of algorithm a. Namely, that its running time is always bounded by a function that grows slower than f(n).
To know more about running time of an algorithm, please visit:
https://brainly.com/question/31383179
#SPJ11
We have a new type of flip flop with inputs A and B. If A-0, then Q+-B ?Q: if A-1, then Q+-(AB), a. Show the state diagram for this flip flop b. Write a single equation for Q in terms of A, B and Q
According to the information, the equation for Q in terms of A, B, and Q is: Q = A'B'Q' + A'BC'Q' + ABC'Q' + AB'CQ'
How to solve this problem?b. The flip-flop can be represented by the following equation:
Q' = (A'B')Q + (A'BC')Q' + (ABC')Q' + (AB'C')Q + (AB'C)Q'
Expanding and simplifying the above equation, we get:
Q' = A'B'Q + A'BC'Q' + ABC'Q' + AB'CQ
Therefore, the equation for Q in terms of A, B, and Q is:
Q = A'B'Q' + A'BC'Q' + ABC'Q' + AB'CQ'
/----Q+--(AB)-----\
/ \
A -o o--> Q
\ /
\----Q+-B ? Q-----/
Learn more about equation in: https://brainly.com/question/29538993
#SPJ1
The following program is incomplete. Write the prototype declarations for the functions called in main. You do not have to write the function definitions. // Working with arrays #include using namespace std; // Function Declarations int main() { int list[100]; int len; int index; index = searchAry(list, len, 95); saveFile("output.txt", list, len); return 0; }
To complete the program, we need to provide the prototype declarations for the two functions called in main, which are "searchAry" and "saveFile". Here are the declarations:
int searchAry(int list[], int len, int target);
void saveFile(string fileName, int list[], int len);
Note that the first function takes an integer array "list", an integer "len" representing the length of the array, and an integer "target" to search for. It returns an integer representing the index of the target in the array.
The second function takes a string "fileName" representing the name of the output file, an integer array "list", and an integer "len" representing the length of the array. It saves the contents of the array to the output file.
Learn More about prototype here :-
https://brainly.com/question/17017885
#SPJ11
describe how changes in the projection angle at constant release velocity affects the flight path (horizontal displacement, vertical displacement, and flight time.)
When an object is projected with a constant release velocity, changes in the projection angle can significantly impact the flight path. Specifically, the horizontal and vertical displacement, as well as the flight time, can be affected.
To understand this better, let's consider a projectile motion scenario. In this scenario, the object is projected at an initial velocity and an angle from the horizontal plane. If we keep the release velocity constant and only vary the projection angle, the following changes can occur:
1. Horizontal displacement: Horizontal displacement refers to the distance the object travels in the horizontal direction before hitting the ground. If the projection angle is increased, the horizontal displacement will also increase. This is because a higher projection angle will result in a greater horizontal velocity component, which will cause the object to travel further in the horizontal direction before hitting the ground.
2. Vertical displacement: Vertical displacement refers to the maximum height the object reaches before falling back down to the ground. If the projection angle is increased, the vertical displacement will also increase. This is because a higher projection angle will result in a greater vertical velocity component, which will cause the object to reach a greater height before falling back down.
3. Flight time: Flight time refers to the time it takes for the object to travel from the point of projection to the point of impact. If the projection angle is increased, the flight time will also increase. This is because a higher projection angle will result in a greater vertical velocity component, which will cause the object to spend more time in the air before hitting the ground.
In summary, changes in the projection angle at constant release velocity can have significant impacts on the flight path of a projectile. Increasing the projection angle can result in increased horizontal and vertical displacement, as well as increased flight time.
Learn more about projection: https://brainly.com/question/1573371
#SPJ11
You have a hash table that uses the separate chaining collision resolution method. However, instead of chaining elements using a linked list, this hash table chains elements using an AVL tree (see diagram). What is the worst-case time complexity of searching for an element in this hash table, if it contains n elements? Assume the hash function runs in O(1) time. A. O(1) B. O(log n) C. P(n) D. O(n log n) E. O(na)
The worst-case time complexity of searching for an element in a hash table that uses separate chaining with an AVL tree is O(log n), where n is the number of elements in the hash table.
When searching for an element in the hash table, the hash function is used to determine the chain or AVL tree where the element may be located. Once the chain or AVL tree is identified, a search operation is performed to locate the element within the chain or AVL tree. In the worst case, the chain or AVL tree may contain all n elements, and the search operation may require traversing the entire chain or AVL tree, resulting in a time complexity of O(log n).
The use of an AVL tree for separate chaining in a hash table offers several advantages. First, it reduces the length of the chains and ensures that the worst-case time complexity of searching for an element is O(log n), even in the case of a large number of collisions. Second, it provides a self-balancing data structure that maintains a balanced AVL tree, ensuring that search, insertion, and deletion operations are efficient, with a time complexity of O(log n) in the worst case.
In summary, the worst-case time complexity of searching for an element in a hash table that uses separate chaining with an AVL tree is O(log n), making it a very efficient and effective data structure for large data sets with potentially many collisions.
To learn more about data structure visit: https://brainly.com/question/29585513
#SPJ11
Given a rectangular cofferdam that is 60 ft wide x 100 ft long and 10 ft deep and enclosed with a 3-ft toe, how many total SFCA are required for the sheet piling? Choose only ONE best answer. A 3,200 B 4,160 C 6,000 D 60,000
The total square footage of sheet piling required is 3,200 square feet
Calculating the total SFCA are required for the sheet piling?To calculate the total square footage of sheet piling required for the rectangular cofferdam, we need to find the perimeter of the cofferdam and multiply it by its height.
The perimeter of the cofferdam can be calculated as follows:
Perimeter = 2(width + length) + toe
= 2(60 + 100) + 3
= 323 feet
The height of the cofferdam is 10 feet.
Therefore, the total square footage of sheet piling required is:
Total square footage = Perimeter x Height
= 323 ft x 10 ft
= 3,230 square feet
This approximates to 3,200 square feet
Read more about square footage at
https://brainly.com/question/24657062
#SPJ1
what is the approximate resistance of a 40 lightbulb if the ac voltage provided to it is given by ? u(t) = 200%/2 cos(100mt)? R= (within three significant digits) Try question again Correct answer R-400 Ω
The approximate resistance of a 40-lightbulb can be calculated using the formula V = IR, where V is the voltage, I is the current, and R is the resistance.
In this case, the voltage provided to the bulb is given by u(t) = 200%/2 cos(100mt). To simplify this expression, we can first convert 200% to 2, since 200% equals twice the original value. Then, we can divide 2 by 2 to get 1 and multiply it by the maximum voltage of the waveform, which is 2. This gives us a maximum voltage of 2V.
Next, we need to find the current flowing through the bulb. To do this, we can use Ohm's law, which states that I = V/R, where I is the current, V is the voltage, and R is the resistance. In this case, we can rearrange the formula to get R = V/I, and substitute the values we have:
R = 2V / I
To find the current, we need to know the expression for the current waveform. Since the waveform is not given in the question, we can assume that the bulb is an ideal resistor, which means that the current waveform will be the same as the voltage waveform, but with a different amplitude. Specifically, the amplitude of the current waveform will be V/R, since V = IR.
Therefore, the current waveform can be expressed as i(t) = 2/R cos(100mt), and the waveform's amplitude is 2/R. We can substitute this expression into the formula for R, and solve for R:
R = 2V / i_max = 2V / (2/R) = R^2V / 2
Solving for R, we get:
R = sqrt(2V / i_max) = sqrt(2*2V / 2) = sqrt(2V) = sqrt(2*2) = 2
Therefore, the approximate resistance of the 40 lightbulbs is R = 400 Ω (within three significant digits).
Learn more about Resistance: https://brainly.com/question/29457983
#SPJ11
Comment on the following?int * const ptr;A. You cannot change the value pointed by ptrB. You cannot change the pointer ptr itselfC. Both (a) and (b)D. You can change the pointer as well as the value pointed by itComment on the following?const int * const ptr;A. You cannot change the value pointed by ptrB. You cannot change the pointer ptr itselfC. Both (a) and (b)D. You can change the pointer as well as the value pointed by it
For the first question, the correct answer is C. The declaration "int * const ptr" means that the pointer variable "ptr" is a constant pointer to an integer, which means that you cannot change the value pointed by ptr (option A) and you cannot change the pointer ptr itself (option B).
For the second question, the correct answer is A. The declaration "const int * const ptr" means that the pointer variable "ptr" is a constant pointer to a constant integer, which means that you cannot change the value pointed by ptr (option A) and you cannot change the pointer ptr itself (option B).