A rectangular solid has the following measurements 6 cm, 10 cm, and 5 cm. what is the volume of the solid?

Answer:

The reactant in a chemical reaction that limits the amount of product that can be formed. The reaction will stop when all of the limiting reactant is consumed. Excess Reactant - The reactant in a chemical reaction that remains when a reaction stops when the limiting reactant is completely consumed.

Explanation:

Answer:

a. aluminum

Explanation:

Given electronic configuration:

       1s² 2s² 2p⁶ 3s² 3p¹  

The number of electrons can be determined from adding the powers or superscripts.

Since we are dealing with a neutral element, the number of electrons and protons are the same. So we can determine the atomic number which is the number of protons.

Number of electrons  = 2 + 2 + 6 + 2 + 1  = 13

The element with atomic number 13 is aluminum.

The given electronic configuration adds up to 13 which is the atomic number of aluminium.Thus, the correct option is A.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable. Aluminium has the given electronic configuration.

Thus, the correct option is A.

Learn more about electronic configuration,here:

https://brainly.com/question/29184975

#SPJ6

Answer:

0.83 bar

That is

23/300*100

=0.83 bar

Answer:

A: COAL

Explanation:

Coal was created hundreds of millions years ago. When prehistoric plant life died and sank to the bottom of the swamp and was covered by layers of sediment.

Answer:

Yes!

Explanation:

I think It would be fun!, Going thought space going from planet to planet. once i get back to earth i can make a document about my time in space.

Answer:

0.35 M

Explanation:

Using the formula; C1V1 = C2V2

Where;

C1 = concentration of initial solution

C2 = concentration of final solution

V1 = volume of initial solution

V2 = volume of final solution

Based on this question, I start with 0.0350 L of a 12.0 M hydrochloric acid solution, and dilute it with water to a new volume of 1.20 L. This means that:

C1 = 12.0 M, V1 = 0.0350 L, V2 = 1.20 L, C2 = ?

Hence, C1V1 = C2V2

12 × 0.0350 = C2 × 1.20

0.42 = 1.2C2

C2 = 0.42/1.2

C2 = 0.35 M

Answer:

In chemistry, a single bond is a chemical bond between two atoms involving two valence electrons. That is, the atoms share one pair of electrons where the bond forms. Therefore, a single bond is a type of covalent bond.

Explanation:

(copied from Google)

Answer:mnedd kfj

Explanation:

fr rb r

Answer:

you cant post pictures on brainly answers.... can you?

Explanation:

Answer:

Explanation:

Sr(OH)₂.+ 2HCl = SrCl₂ + 2H₂O

Moles of HCl in 28mL of .10 M HCl = .028 x .1 = .0028 moles .

Moles of Sr(OH)₂ in 60mL of .10 M Sr(OH)₂ = .060 x .1 = .0060 moles

2 moles of HCl  reacts with 1 mole of Sr(OH)₂

.0028 moles of HCl  reacts with .0014  mole of Sr(OH)₂

moles of Sr(OH)₂ remaining = .0060 - .0014 = .0046 moles .

Sr(OH)₂  = Sr⁺  +  2OH⁻

1 mole                  2 mole

.0046                    .0092

Total volume of solution = 88 mL .

88 mL of solution contains .0092 moles of OH⁻

concentration of OH⁻ = .0092 / .088

= .1045 M  .

When Strontium hydroxide, Sr(OH)₂ will react with hydrochloric acid (HCl) then the reaction formed will be:

Sr(OH)₂+ 2 HCl ⇒ SrCl₂ + 2 H₂O

The concentration of OH in the resulting solution will be 0.1045 M.

This can be calculated by:

[tex]\text{Molarity} = \dfrac{\text{moles}}{\text{volume of the solution in litres}}[/tex]

Moles of HCl = 0.028 x 0.1 = 0.0028 moles

Moles of Sr(OH)₂ =  0.060 x 0.1 = 0.0060 moles

Remaining moles of Sr(OH)₂  = 0.0060 - 0.0014 = 0.0046 moles

Sr(OH)₂   ⇒   Sr⁺ + 2OH⁻

1 mole                    2 mole

0.0046                  0.0092

Total volume of solution = 88 mL

88 mL of solution contains 0.0092 moles of OH⁻

Hence, concentration of OH⁻ :

[tex]= \dfrac{0.0092 }{0.088}[/tex]

= 0.1045 M

Therefore, 0.1045 M will be the concentration of OH in the solution.

To learn more about molarity and concentration follow the link:

https://brainly.com/question/15532279

a.NH₃+HCl⇒NH₄Cl

b.volume HCl=150 ml

c. pH=4.82

Reaction

NH₃+HCl⇒NH₄Cl

The equivalence point⇒mol NH₃=HCl

Titration formula :

M₁V₁n₁=M₂V₂n₂(n=acid base valence, NH₃=HCl=1)

mol NH₃

[tex]\tt 2.5\times 30=75~mlmol[/tex]

mol HCl=75 mlmol

[tex]\tt \dfrac{75}{0.5}=150~ml[/tex]

Volume total :

[tex]\tt 150+30=180~ml[/tex]

mol NH₄Cl=mol NH₃=75 mlmol=0.075 mol

[tex]\tt M=\dfrac{0.075}{0.180}= 0.42[/tex]

Dissociation of NH₄Cl at water to find [H₃O⁺]

[tex]\tt NH_4+H_2O\rightarrow NH_3+H_3O^+[/tex]

ICE at equilibrium :

0.41-x            x        x

Ka(Kw:Kb)= 10⁻¹⁴ : 1.8.10⁻⁵=5.6.10⁻¹⁰

[tex]\tt Ka=\dfrac{NH_3.H_3O}{NH_4}=\dfrac{x^2}{0.41}[/tex]

[H₃O⁺]=x :

[tex]\tt \sqrt{5.6.10^{-10}\times 0.41}=1.515.10^{-5}[/tex]

pH=-log[H₃O⁺]

[tex]\tt pH=5-log~1.515=4.82[/tex]

Answer:

Explanation:

The new volume can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

Since we are finding the new volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

So we have

[tex]V_2 = \frac{5 \times 40}{1} \\ = 5 \times 40[/tex]

We have the final answer as

Hope this helps you

Answer:

T(final) = 52°C

Explanation:

1st, you need to correct your heat flow formula => q = mcΔT.

m = 22.5g

c = 0.45 j/g·°C

ΔT = T(final) - T(initial) = T(final) - 20°C

q = (22.5g)(0.45j/g·°C)((final) - 20°C) = 324j

=> T(final) = [324j/(22.5g)(0.45j/g·°C)] + 20°C = 52°C

Answer:

Not sure if you just wanted the basic structure or full on structure.

Explanation:

Answer:

be.77.0kj.

Explanation:

add moles then times

Considering the definition of enthalpy of vaporization,  the correct answer is option c. the heat required to vaporize 15.8 g of CH₃OH at its boiling point is 18.8 kJ.

When a material changes phase from solid to liquid, or from liquid to gas, a certain amount of energy is involved in this phase change.

In case of phase change from liquid to gas, this amount of energy is known as enthalpy of vaporization (symbolized as ∆H vap), also known as (latent) heat of vaporization or heat of evaporation.

In other words, the enthalpy of vaporization is the amount of energy required to change a unit of mass (for example, moles or kg) of a substance from phase liquid to phase gas at constant temperature and pressure.

In this case, you know that enthalpy of vaporization is ∆Hvap = 38.0 kJ/mol.

On the other side, you want to vaporize 15.8 g of CH₃OH.  Then, being the molar mass of the compound 32 g / mole (that is, the amount of mass contained in one mole), the number of moles to be vaporized is:

[tex]15.8 gramsx\frac{1 mol}{32 grams}= 0.49375 moles[/tex]

Then, the heat required to vaporize 0.49375 moles of CH₃OH at its boiling point is calculated taking into account the enthalpy of vaporization by:

0.49375 moles×  38.0 kJ/mol= 18.76 kJ ≅ 18.8 kJ

Finally, the correct answer is option c. the heat required to vaporize 15.8 g of CH₃OH at its boiling point is 18.8 kJ.

Learn more:

Answer:

Adding heat to the reaction or increasing pressure

Explanation:

Increasing temperature or pressure will result in chemical reaction rates to speed up.

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the products are carbon dioxide, sulfur dioxide and water.

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The other characteristic of balanced equation is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.

The balanced equation is

CH[tex]_3[/tex]SH + 4O[tex]_2[/tex] → CO[tex]_2[/tex] + SO[tex]_2[/tex] +2H[tex]_2[/tex]O

The products that are formed in the given reaction are carbon dioxide, sulfur dioxide and water.

Therefore, the products are carbon dioxide, sulfur dioxide and water.

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ6

Answer:

[H₃O⁺] = 0.0507 M

pH = 1.29

Explanation:

23.1 g of HCI (a strong acid) is added to water to make 1250 mL of solution. Calculate [H₃O⁺] and pH of the solution.

Step 1: Given data

Step 2: Calculate the concentration of HCl

We will use the following expression.

[HCl] = mass HCl / molar mass HCl × liters of solution

[HCl] = 2.31 g / 36.46 g/mol × 1.250 L

[HCl] = 0.0507 M

Step 3: Calculate the concentration of H₃O⁺

HCl is a strong acid according to the following equation.

HCl(aq) + H₂O(l) ⇒ H₃O⁺(aq) + Cl⁻(aq)

The molar ratio of HCl to H₃O⁺ is 1:1. Then, [H₃O⁺] = 0.0507 M.

Step 4: Calculate the pH of the solution

We will use the following expression.

pH = -log [H₃O⁺]

pH = -log 0.0507

pH = 1.29

Answer:

If two atoms have different numbers of protons, they are different elements. However, if two atoms have the same number of protons, but different numbers of neutrons we refer to them as isotopes. Two terms we use to identify nuclides (isotopes) are atomic number and mass number.

Explanation:

Your Welcome!

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, in below given ways we can identify isotopes.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Differing elements exist when two atoms contain different numbers of protons. If two atoms contain the same amount of protons but differing numbers of neutrons, they are referred to be isotopes.

Therefore, in above given ways we can identify isotopes.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer:

1.43 (w/w %)

Explanation:

HCl reacts with NH3 as follows:

HCl + NH3 → NH4+ + Cl-

1 mole of HCl reacts per mole of ammonia.

Mass of NH3 is obtained as follows:

Moles HCl:

0.02999L * (0.1068mol / L) = 3.203x10-3 moles HCl = Moles NH3

Mass NH3 in the aliquot:

3.203x10-3 moles NH3 * (17.031g / mol) = 0.0545g.

Mass of sample + water = 22.225g + 75.815g = 98.04g

Dilution factor: 98.04g / 14.842g = 6.6056

That means mass of NH3 in the sample is:

0.0545g * 6.6056 = 0.36g NH3

Weight percent is:

0.36g NH3 / 25.225g * 100

Answer:

answer is d Combining

Explanation:

I did the test and got it correct

As a chemical change takes place when binders are added to a paint mixture combining part of the manufacturing process occurs.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical change,here:

https://brainly.com/question/2591189

#SPJ6

Answer:

The answer is "Option b, c, and d".

Explanation:

In such a gene, Autosomes are also the sequence for code and transposable elements, not the series of encoding. Through the expression of genes, such fragments of its introns are split through protein complexes throughout the translation process. There has been no kenaf fiber in the genomes of prokaryotic cells.

Answer:

i just took the test the correct answer is   "most of them stay green all year"

Explanation:

Answer:

its B :)

Explanation:

cuz im mr beast

Liquid 2 because the lower the density the more it floats and the higher the density the more it sinks. The order from top to bottom is liquid 2, liquid 3, liquid 1

Answer:

sulfide ion

Explanation:

however, when non-metalic elements gain electrons to form anions the end of their name is change to "-ide".foe example, a flourin atom gains one electronto become a flouride ion(F`) and sulfur gains two electrons to become a sulfide ion(s^2)

Answer:a a atom

Explanation:

Answer:

a. carbon

b. atomic number

c. mass number

d. 6

e. 7

f. 8

pls mark as brainliest