a population has a mean μ=80 and a standard deviation σ=7. find the mean and standard deviation of a sampling distribution of sample means with sample size n=49.

The reference angle for 138 is 58.

Let's first sketch the angle and then find its reference angle using the terms you mentioned.

Step 1: Sketch the angle 13π/8
To sketch the angle, first, we need to determine its position on the coordinate plane. Since 13/8 is greater than  (or 8/8), it's located in the third quadrant. As a full circle is 2 (or 16/8), we can determine the angle measured counterclockwise from the positive x-axis as:
Angle = 13π/8

Step 2: Find the reference angle
A reference angle is an acute angle formed between the terminal side of the angle and the x-axis. In the third quadrant, the reference angle is calculated as:
Reference Angle = Angle - π

Now we substitute the values:
Reference Angle = 13π/8 - 8π/8 = 5π/8

So, the reference angle for 138 is 58.

Visit here to learn more about reference angle:

brainly.com/question/1603873

#SPJ11

Based on probability, the response to the question is,

[tex]a).\ (\frac{N}{(M+N)} )^M\\\\b).\ C(N+k-1,k)^*((\frac{M}{M+N} )^M)^*((\frac{(N+k-1)}{(M+N)} )^k)[/tex]

Probability measures the likelihood or probability of an event happening. It is a number between 0 and 1, where 0 signifies an unlikely occurrence (one that would never happen) and 1 denotes an expected event (one that would happen frequently). Events between 0 and 1 have probabilities between 0 and 1, and the closer an event's probability approaches 1, the more probable it is to occur.

After removing all of the green apples, there is a chance that there won't be an apple in the box [tex](\frac{N}{(M+N)} )^M[/tex].

This is so that there are always less apples overall and fewer green apples overall after each removal. On the first draw, there is a chance of removing a green apple of M / (M + N).

On the second draw, there is a chance of removing another green apple (M-1) / (M + N - 1) until all M green apples have been taken out. These probabilities can be combined to determine the likelihood that all M green apples are taken out of the box, leaving nothing inside.

The binomial coefficient indicates the likelihood that exactly k apples remain in the box after all the green apples have been removed,

[tex]C(N+k-1, k) * ((\frac{M}{(M+N)} )^M) * ((\frac{(N+k-1)}{(M+N)} )^k)[/tex]

This is due to the fact that C(N+k-1, k) methods for choosing which of the remaining (N+k-1) apples are red, and the likelihood that this

choice will be made is [tex](\frac{(N+k-1)}{(M+N)} )^k*((\frac{M}{(M+N)} )^M)[/tex].

To know more about Binomial coefficient, visit:

brainly.com/question/14216809

#SPJ1

Answer:

Step-by-step explanation:

24/5-12/5=12/5

To simplify 2 4/5 - 1 2/5, we first need to convert the mixed numbers into improper fractions.

Step 1: Convert the mixed numbers to improper fractions:

2 4/5 = (2 x 5 + 4)/5 = 14/5

1 2/5 = (1 x 5 + 2)/5 = 7/5

Step 2: Subtract the two improper fractions:

14/5 - 7/5 = (14 - 7)/5 = 7/5

Step 3: Convert the resulting fraction back into a mixed number, if necessary:

7/5 can be written as 1 2/5

Therefore, 2 4/5 - 1 2/5 = 1 2/5

Answer:It is given b the x2 of the anwserr fot the firghjt angle

Step-by-step explanation:

The temperature ratio T2/T1 = I^(γ-1), and for small disturbances, the change in entropy ΔS ≈ n * R * 2 * (γ - 1) * ε.

The temperature ratio T2/T1 in terms of the pressure ratio P2/P1 can be found using the adiabatic process equation for an ideal gas. For an adiabatic process, the equation is:

P1 * V1^γ = P2 * V2^γ

Where γ is the heat capacity ratio (Cp/Cv). Since P2/P1 = I, we can rewrite the equation as:

V1^γ = V2^γ * I

From the ideal gas law, we know that P1 * V1 / T1 = P2 * V2 / T2, so:

V1 / T1 = V2 / T2 * I

Now, we can substitute V1^γ from the first equation into the second equation:

T2 / T1 = I^(γ-1)

For the change in entropy, we can use the formula:

ΔS = n * Cv * ln(T2 / T1) + n * R * ln(V2 / V1)

Substituting the temperature ratio and the volume ratio, we get:

ΔS = n * R * [(γ - 1) * ln(I) + ln(I^(γ - 1))]

For small disturbances, where I = 1 + ε and ε << 1, we can use the approximation ln(1 + ε) ≈ ε:

ΔS ≈ n * R * (γ - 1) * ε + n * R * (γ - 1) * ε

ΔS ≈ n * R * 2 * (γ - 1) * ε

To know more about adiabatic process click on below link:

https://brainly.com/question/14930930#

#SPJ11

Answer:

multiply the bottom by 2

Step-by-step explanation:

Answer:

the mountains bring Pat joy because it is beautiful

only one I know

Step-by-step explanation:

:)

The correct option is: a. mn vertices and m+n edges. To determine the number of vertices and edges in the graph K_m,n, you should consider that it is a bipartite graph. A bipartite graph is a graph in which the vertices can be divided into two disjoint sets, and every edge connects a vertex from one set to another.

In the graph K_m,n, there are m vertices in the first set and n vertices in the second set. So, the total number of vertices is m + n.
The graph K_m,n is a complete bipartite graph, meaning that every vertex in one set is connected to every vertex in the other set. Therefore, there are m * n edges in the graph K_m,n.
So, the correct option is: a. mn vertices and m+n edges

Learn more about vertices and edges here, https://brainly.com/question/30459331

#SPJ11

The frequency response of the LTI system described by the difference equation y[n] = 3x[n] + 2x[n-1] + x[n-2] is given by H( [tex]e^j^\omega[/tex] ) = 3 + 2e^(-jω) +

[tex]e^-^2^j^\omega[/tex] .


1. Convert the difference equation to the frequency domain using the Fourier transform.
2. Replace x[n] with X( [tex]e^j^\omega[/tex]) and y[n] with Y( [tex]e^j^\omega[/tex]).
3. Solve for the transfer function H( [tex]e^j^\omega[/tex]) = Y( [tex]e^j^\omega[/tex]) / X( [tex]e^j^\omega[/tex]).

For the given difference equation:
Y( [tex]e^j^\omega[/tex]) = 3X( [tex]e^j^\omega[/tex]) + 2X( [tex]e^j^\omega[/tex])[tex]e^-^j^\omega[/tex] + X( [tex]e^j^\omega[/tex]) [tex]e^-^2^j^\omega[/tex]

Divide both sides by X( [tex]e^j^\omega[/tex]):
H( [tex]e^j^\omega[/tex]) = Y( [tex]e^j^\omega[/tex]) / X( [tex]e^j^\omega[/tex]) = 3 + 2[tex]e^-^j^\omega[/tex] +  [tex]e^-^2^j^\omega[/tex]

This expression represents the frequency response of the given LTI system.

To know more about Fourier transform click on below link:

https://brainly.com/question/29063535#

#SPJ11

Based on constitutive laws, Lit's interpretation of her friend's actions.Therefore, choice b is right.

Tammy should have asked the host to serve her instead of reaching over the table to get the salt shaker since, as per the constitution, you are not allowed to reach across the table and touch objects on it.

Constitutive rules are those that have a creative purpose, making it possible to carry out specific activities or take part in a specific practise. They are typically opposed to regulative rules.

The practises that constitutive norms establish are metaphysically prior to one another.According to John Searle's influential constitutive rules theory, behaviours are only possible when certain conditions are met. This distinguishes regulative rules which aim to control previously existing and established behavior from constitutive norms.

To know more about constitutive rules please check the following link

https://brainly.com/question/31325033

#SPJ4

The units for the cost function C(x,y) are dollars, and the units for x and y are miles.

To minimize the cost of laying the pipeline:

Point P should be located 1.5 miles down the shoreline from the storage tank (point B).

To show this, let x represent the distance from point B to point P along the shoreline, and y represent the distance from point P to the rig (point R) underwater.

Then, the total cost of laying the pipeline can be represented by the function C(x,y) = 800y + 400(8-x).

Since the distance from point A to point R is 3 miles, we know that x + y = 3. Solving for y in terms of x, we get y = 3-x.

Substituting this into the cost function, we get C(x) = 800(3-x) + 400(8-x) = 3200 - 400x.

To minimize this function, we can take the derivative and set it equal to zero:

C'(x) = -400.

Therefore, there is no critical point, but the function is decreasing as x increases.

Since x represents the distance from point B to point P along the shoreline, we want to minimize x while still satisfying the constraint that x + y = 3.

This means that y must be maximized, which occurs when x = 1.5.

Therefore, point P should be located 1.5 miles down the shoreline from the storage tank (point B) and 1.5 miles from the rig (point R) underwater.

The domain of the function we optimized was x in [0,8] (the distance along the shoreline from point B to the right) since we cannot have a negative distance or a distance greater than 8 miles along the shoreline.

The units for the cost function C(x,y) are dollars, and the units for x and y are miles.

To now more about Cost Function:

https://brainly.com/question/31041336

#SPJ11

Answer:

Step-by-step explanation:

x+y=10

225x+70y=1165 where x is number of slider in the combination

y is the number of chicken wing in the combination.

An equation is a mathematical statement that expresses the equality between two mathematical expressions. It typically consists of mathematical symbols, such as numbers, variables, and mathematical operators, arranged in a specific pattern or format.

A combination refers to a way of selecting or arranging objects without regard to their order, where the order of selection does not matter. A combination is a selection of objects where the arrangement or order of the objects is considered irrelevant.

Let x=number of slider

y= number of chicken wing

then, x+y= 10 ,

Since each slider has 225 calories and each chicken wing has 70 calories, then

225x+70y= 1165

Hence the system of equations are:

x+y=10

225x+70y=1165

Learn more about variables here:

https://brainly.com/question/29583350

#SPJ1

The equation for the total number of coins is given as follows:

x + y = 12.

The equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

The variables for the system of equations are defined as follows:

They have a total of 12 coins, hence the equation for the total number of coins is given as follows:

x + y = 12.

Considering the value of each coin, 10 cents = 0.1 and 5 cents = 0.05, the  equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

The equation for the total number of coins is given as follows:

x + y = 12.

The equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

The variables for the system of equations are defined as follows:

They have a total of 12 coins, hence the equation for the total number of coins is given as follows:

x + y = 12.

Considering the value of each coin, 10 cents = 0.1 and 5 cents = 0.05, the  equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

To determine the generating function for the sequence h0, h1, h2,..., hn,...., we first need to express the sequence in terms of a polynomial. Using the formula for binomial coefficients, we have:

hn = (n C 2) = n!/(2!(n-2)!) = (1/2)n(n-1)

So, the sequence can be expressed as the polynomial:

h(x) = 0 + (1/2)x(x-1) + (1/2)2(2-1)x(x-1)(x-2) + ... + (1/2)n(n-1)x(x-1)(x-2)...(x-n+1) + ...

Now, we can use the definition of a generating function to write:

H(x) = h0 + h1x + h2x^2 + ... + hnx^n + ...

H(x) = (1/2)0(0-1) + (1/2)1(1-1)x + (1/2)2(2-1)x^2 + ... + (1/2)n(n-1)x^n + ...

H(x) = 0 + 0x + (1/2)x^2 + (1/2)2x^3 + ... + (1/2)n(n-1)x^(n+1) + ...

Hence, the generating function for the sequence h0, h1, h2,..., hn,.... is:

H(x) = (1/2) x^2 (1 + 2x + 3x^2 + ...)

Given the sequence h_n = C(n, 2), where n ≥ 0, we want to find the generating function for this sequence. The generating function, G(x), is defined as the formal power series:

G(x) = h_0 + h_1x + h_2x^2 + h_3x^3 + ...

We know that h_n = C(n, 2) = n(n - 1)/2 for n ≥ 0. So, we can rewrite the generating function as:

G(x) = h_0 + h_1x + h_2x^2 + h_3x^3 + ... = ∑ [n(n - 1)x^n / 2] for n ≥ 0.

By using the binomial theorem, we can express G(x) as:

G(x) = 1/2 * (x * d/dx)^2 (1 - x)^(-1)

Here, (x * d/dx) is the operator that represents the derivative with respect to x multiplied by x. By applying this operator twice to (1 - x)^(-1) and then multiplying the result by 1/2, we obtain the generating function for the sequence.

Visit here to learn more about polynomial brainly.com/question/11536910

#SPJ11

Answer: 672 Cubic Yards

Step-by-step explanation:

To find the volume of a rectangular prism, you need to multiply its length by its width by its height.

In this case, the length is 14 yards, the width is 6 yards, and the height is 8 yards.

So, the volume of the rectangular prism is:

14 yards × 6 yards × 8 yards = 672 cubic yards

Therefore, the volume of the rectangular prism is 672 cubic yards.

The first four terms of the Taylor series for 3/x about the point α = 2 are: 3/2 - (3/4)(x-2) + (3/4)(x-2)² - (9/16)(x-2)³.

To find the Taylor series for a function, we need to calculate its derivatives at the point of expansion and then substitute those values into the general formula for the Taylor series. The general formula for the Taylor series of a function f(x) about a point a is:

f(x) = f(a) + f'(a)(x-a)/1! + f''(a)(x-a)²/2! + f'''(a)(x-a)³/3! + ...

Here, we want to find the Taylor series for the function f(x) = 3/x about the point α = 2. First, we will calculate the derivatives of f(x):

f(x) = 3/x

f'(x) = -3/x²

f''(x) = 6/x³

f'''(x) = -18/x⁴

Now we can substitute these derivatives into the general formula for the Taylor series to get:

f(x) = f(2) + f'(2)(x-2)/1! + f''(2)(x-2)²/2! + f'''(2)(x-2)³/3! + ...

We can calculate the first few terms of this series:

f(2) = 3/2

f'(2) = -3/4

f''(2) = 3/4

f'''(2) = -9/16

Substituting these values into the series, we get:

3/x = 3/2 - (3/4)(x-2) + (3/4)(x-2)² - (9/16)(x-2)³ + ...

So the first four terms of the Taylor series for 3/x about the point α = 2 are 3/x = 3/2 - (3/4)(x-2) + (3/4)(x-2)² - (9/16)(x-2)³

Learn more about Taylor series :

https://brainly.com/question/29733106

#SPJ4

Answer:

B and E

Step-by-step explanation:

They both have the same number of untis as Z

Since the function f(x) = x², g(x) include the following: D. g(x) = (1/3x)².

In Mathematics and Geometry, a transformation can be defined as the movement of a point from its initial position to a new location. This ultimately implies that, when a function or object is transformed, all of its points would also be transformed.

In Mathematics and Geometry, a dilation simply refers to a type of transformation which typically changes the size of a geometric object, but not its shape.

Based on the graph, we can logically deduce that function g(x) can be produced by vertically stretching the parent function by a scale factor of 1/3;

g(x) = 1/3f(x)

g(x) = (1/3x)²

g(x) = (1/9)x²

Read more on transformation here: https://brainly.com/question/10754933

#SPJ1

A key difference between MANOVA and ANOVA is that MANOVA has the ability to handle multiple dependent variables.

The key difference between MANOVA and ANOVA is that MANOVA has the ability to handle multiple dependent variables. ANOVA, on the other hand, only deals with a single dependent variable. MANOVA can also handle multiple independent variables, multiple error terms, and multiple null hypotheses. However, it is important to note that MANOVA is more complex than ANOVA and requires more data to perform accurate analyses.

Know more about multiple dependent variables here:

https://brainly.com/question/30076028

#SPJ11

.

1) The Taylor series for sin(x) at x=0 is as follows: sin(x) = x - x3/3! + x5/5! - x7/7! +...

This series' radius of convergence is infinite.

2) The Taylor series for ex near x=0 is as follows: ex = 1 + x + x2/2! + x3/3! + x4/4! +...

This series' radius of convergence is infinite.

3) The Taylor series for x near x=1 is as follows: x = 1 + (x-1)

This series has a radius of convergence of one because it converges exclusively for |x-1| 1.

4) The Taylor series for x2 around x=0 is as follows: x2 = 0 + x2

This series' radius of convergence is infinite.

Learn more about Taylor series here:

https://brainly.com/question/29733106

#SPJ1

The value of x that satisfies the given conditions is approximately 7.

Given that KLMN is similar to PQRS. This means that the corresponding sides of these two angles are proportional. We can use this property to set up a proportion between the sides of the two angles.

Let LM and RQ be corresponding sides in the two triangles, and let KN and SP be the other corresponding sides. Then we have:

LM/RQ = KN/SP

Substituting the given values, we get:

(4x + 4)/48 = (7x - 9)/60

To solve for x, we cross-multiply, which gives us:

(4x + 4) * 60 = (7x - 9) * 48

Expanding both sides, we get:

336x - 432 = 240x + 240

Simplifying and solving for x, we get:

96x = 672

x = 7

Therefore, the value of x that satisfies the given conditions is approximately 7.

Learn more about angle here:

https://brainly.com/question/25239819

#SPJ1

Answer:

50% of 30 is 15. 25% of 40 is 10. So, the product of 50% of 30 and 25% of 40 is 150.

Here's the calculation:

```

(50/100) * 30 * (25/100) * 40 = 150

```

Step-by-step explanation:

To find the smallest value of n for which the sum of the series is accurate to within 0.00001, we need to use the formula for the remainder of a convergent series:

R_n = |S - S_n|

where R_n is the remainder, S is the sum of the series, and S_n is the sum of the first n terms.

We want R_n to be less than or equal to 0.00001, so we have:

|R_n| ≤ 0.00001

Substituting the given values, we get:

|(2n+1)^4/5 - 51| ≤ 0.00001

Simplifying and taking the fifth root, we get:

2n+1 ≤ (51.00001)^(1/4)

2n+1 ≤ 3.1673

n ≤ 1.5836

Since n has to be an integer, the smallest value of n that satisfies this inequality is n = 1.

Therefore, we need at least 1 term of the series to get a sum accurate to within 0.00001.

Note: This is a bit of a tricky question because the given series converges very quickly, so only one term is needed to get a sum accurate to within 0.00001.
To determine how many terms of the series are needed so that the sum is accurate to within 0.00001, we can use the remainder estimation theorem.

Given the desired remainder, 0.00001, and the error tolerance, 0.0005, we can find the smallest integer value of n that satisfies these conditions. Since the series is a convergent alternating series, the remainder is less than the absolute value of the (n+1)th term. Therefore, we need to find the smallest integer value of n for which:

|(2n + 1)^(-4)/51| < 0.00001

Solving for n, we can determine the smallest value that meets this criterion. By trial and error or using a calculator, we can find that the smallest integer value of n that satisfies this condition is n = 6.

Visit here to learn more about sum brainly.com/question/29034036

#SPJ11

Answer:

--------------------

Given equation:

    [tex]x+1=\sqrt{19-x}[/tex]

Square both sides, considering 19 - x ≥ 0  ⇒ x ≤ 19:

Solve the quadratic equation by factoring:

The matching choice is B.

Answer:7

Step-by-step explanation: as she pays with 2 £20s it'll be 40 so £40 - 8.50 which is £31.50. then 31.50/4.50 which is 7

Answer: 38845

Step-by-step explanation:

Answer:

38,845

Step-by-step explanation:

Diverges. Series is not a geometric series as it does not have a common ratio. However, we can rewrite the series as:
7n + 18-n = 7n(1 + 18(-1/n))
As n approaches infinity, the second term inside the parentheses approaches 1, so we can write:
7n(1 + 18(-1/n)) ≈ 7n(1 + 0) = 7n
Thus, we can see that the series is a constant multiple of the series 7n, which is a geometric series with a common ratio of 7. Since the common ratio is greater than 1, the series diverges.

To determine if the series is convergent or divergent, we should  find the limit of the terms as n goes to infinity.
The series can be rewritten as: (7n) + (18(-n)n)

As n goes to infinity, the term 7n will also go to infinity. Meanwhile, the term 18(-n)n will approach 0 since any number

raised to a negative power becomes smaller as n increases. However, the 7n term dominates the series, so the limit of

the terms is not 0 as n goes to infinity.
Therefore, the series is divergent.  Diverges; the limit of the terms, an, is not 0 as n goes to infinity.

learn more on Geometric series  at: https://brainly.com/question/24643676

#SPJ11