(a) The current through the person's body is approximately 1.23 mA.
(b) The power dissipated in his body is approximately 24.84 W.
(c) The internal resistance of the power supply should be at least 14,188 ohm.
(a) The current through the person's body can be calculated using Ohm's law. The total resistance in the circuit is the sum of the person's body resistance and the internal resistance of the power supply. Thus,
I = V / (R_person + R_internal) = 16,000 V / (12,000 ohm + 2,320 ohm) = 1.23 mA.
(b) The power dissipated in the person's body can be calculated using the formula P = I^2 * R, where R is the person's body resistance. Thus,
P = (1.23 mA)^2 * 12,000 ohm = 24.84 W.
(c) To limit the current through the person's body to 1.05 mA, the internal resistance of the power supply should be increased. The maximum allowable internal resistance can be calculated using the formula R_internal = (V / I_max) - R_person, where I_max is the maximum current allowed. Thus,
R_internal = (16,000 V / 1.05 mA) - 12,000 ohm = 14,188 ohm.
Therefore, the internal resistance of the power supply should be at least 14,188 ohm to limit the current through the person's body to 1.05 mA or less.
For more questions like Resistance click the link below:
https://brainly.com/question/29427458
#SPJ11
discuss the effect of the earth’s magnetic field on the result of this experiment measuring mass of electron
Hence, the Earth's magnetic field could potentially affect the results of the experiment measuring the mass of the electron, particularly if the experiment involves the use of charge particles or magnetic fields.
The earth's magnetic field can have an effect on experiments measuring the mass of electrons. This is because charged particles, like electrons, can be influenced by magnetic fields. When an electron is moving in a magnetic field, it will experience a force perpendicular to its velocity, causing it to move in a circular path. This means that the path of the electron can be altered by the magnetic field, leading to inaccurate measurements of its mass.
To mitigate this effect, scientists must ensure that the experimental apparatus is shielded from the earth's magnetic field as much as possible. This can involve using materials that do not conduct magnetic fields or placing the experiment in a location that is shielded from the effects of the earth's magnetic field. By reducing the impact of the earth's magnetic field on the experiment, scientists can obtain more accurate measurements of the mass of electrons.
In conclusion, the earth's magnetic field can have a significant impact on experiments measuring the mass of electrons. By taking steps to minimize this effect, scientists can obtain more accurate results and further our understanding of fundamental particles and their properties.
Know more about Earth's Magnetic Field here:
https://brainly.com/question/3036309
#SPJ11
A curve of radius 50.2 m is banked so that a car of mass 1.7 Mg traveling with uniform speed 53 km/hr can round the curve without relying on friction to keep it from slipping on the surface. 1.6 Mg µ ≈ 0 θ At what angle is the curve banked? The acceleration due to gravity is 9.8 m/s 2 . Answer in units of deg.
A curve of radius 50.2 m is banked so that a car of mass 1.7 Mg traveling with uniform speed 53 km/hr can round the curve without relying on friction to keep it from slipping on the surface. The angle at which the curve is banked is approximately 21.2 degrees.
To explain, we can use the formula for the angle of banking:
[tex]θ = tan⁻¹(v² / (r * g))[/tex]
Where v is the velocity of the car, r is the radius of the curve, and g is the acceleration due to gravity. Plugging in the values given, we get:
[tex]θ = tan⁻¹((53 km/hr)² / (50.2 m * 9.8 m/s²))[/tex]
Converting the velocity to meters per second and simplifying, we get:
[tex]θ ≈ 21.2[/tex] degrees
Therefore, the angle at which the curve must be banked is approximately 21.2 degrees. This angle allows the horizontal component of the car's mass to balance the necessary centripetal force needed to round the curve without relying on friction.\
learn more about mass here:
https://brainly.com/question/15959704
#SPJ11
an ideal spring of negligible mass is 11.00 cm long when nothing is attached to it. when you hang a 3.75 kg object from it, you measure its length to be 12.50 cm.If you wanted to store 10.0J of potential energy in this spring, what would be its total length? Assume that it continues to obey Hooke's law.Express your answer numerically. If there is more than one answer, enter each answer, separated by a comma.
Rearranging the equation and solving for potential energy yields a result of 10 J when multiplied by the spring constant of 2520 N/m and the displacement of 5.11 cm, thus confirming that the overall length of the spring is 16.11 cm.
To solve this problem, Hooke's Law and Conservation of Energy were used. Hooke's Law states that the elongation of a spring is directly proportional to the force applied and inversely proportional to the spring constant.
The spring constant, k, is equal to the force F divided by the elongation x. From the given data, the force is equal to the mass of the object multiplied by the acceleration due to gravity, F = m*g. The elongation of the spring is equal to the difference in length from when nothing is attached to it, x = 12.50 cm - 11.00 cm = 1.50 cm. Thus, the spring constant is equal to:k = F/x = (3.75 kg * 9.8 m/s2)/1.50 cm = 2520 N/m.
The Conservation of Energy states that the potential energy stored in a spring is equal to the work done to stretch it multiplied by the spring constant. Using the given data, the potential energy stored in the spring is equal to 10 J.
The total elongation of the spring, y, is calculated by rearranging the equation and solving for y, which gives y = 10 J/(2520 N/m) = 3.97 cm. The total length of the spring can then be calculated by adding the elongation to the original length, y + 11.00 cm = 14.44 cm. Similarly, the elongation can be found by subtracting the original length from the total length of:16.11 cm: 16.11 cm - 11.00 cm = 5.11 cm.
Rearranging the equation and solving for the potential energy gives 10 J = (2520 N/m) * 5.11 cm, which confirms that the total length of the spring is 16.11 cm.
Learn more about Hooke's Law at: https://brainly.com/question/15703348
#SPJ11
In a series R-L-C circuit, L=0.200 H, C=80.0 microfarads, and the voltage amplitude of the source is 240 V.
a)What is the resonance angular frequency of the circuit? (I already solved this part and the correct answer according to my homework program is 250 rad/s.)
b)When the source operates at the resonance angular frequency, the current amplitude in the circuit is 0.600 A. What is the resistance R of the resistor? Answer should be in ohms
c)At the resonance frequency, what are the peak voltages across the inductor, the capacitor, and the resistor? Please enter your answer as three numbers separated with commas. Vl, Vc, Vr=__,__,__ (answer is in unit V).
a) The resonance angular frequency of the circuit is 250 rad/s. b) The resistance R of the resistor at resonance frequency is 200 ohms. c) At the resonance frequency, the peak voltages across the inductor, capacitor, and resistor are 60 V, 60 V, and 240 V respectively.
a) The resonance angular frequency of a series R-L-C circuit can be calculated using the formula: ω = 1/√(LC), where L is the inductance in Henries and C is the capacitance in farads. Given that L = 0.200 H and C = 80.0 microfarads (or 80.0 x 10^(-6) F), we can substitute these values into the formula to get: ω = 1/√(0.200 x 80.0 x 10^(-6)) = 250 rad/s.
b) At the resonance frequency, the impedance of the inductor and capacitor cancel each other out, resulting in a purely resistive circuit. The current amplitude in the circuit is given as 0.600 A. Using Ohm's law, we can calculate the resistance R of the resistor as R = V/I, where V is the voltage amplitude of the source (240 V) and I is the current amplitude (0.600 A). Thus, R = 240 V / 0.600 A = 200 ohms.
c) At the resonance frequency, the voltage across the inductor (Vl) and capacitor (Vc) are equal and given by the formula: Vl = Vc = IωL = IωC, where I is the current amplitude, ω is the angular frequency, L is the inductance, and C is the capacitance. Using the values given, we can calculate Vl and Vc as 60 V each. The voltage across the resistor (Vr) is the same as the voltage amplitude of the source, which is 240 V. Thus, Vl, Vc, and Vr are 60 V, 60 V, and 240 V respectively.
Learn more about R-L-C circuit here:
https://brainly.com/question/13003370
#SPJ11
how does the work required to accelerate the rod from rest to this angular speed compare to the rod’s kinetic energy at time tt ?
Only when 2 = 2W/I is the effort necessary to accelerate a rod to a given angular speed equal to its kinetic energy. If not, it is equal to or higher than its kinetic energy at that moment.
What connection exists between angular acceleration and angular speed?It is a numerical illustration of how angular velocity changes over time.A pseudoscalar, angular acceleration, exists. If the angular speed rises anticlockwise, the sign of angular acceleration is regarded to be positive; if it grows clockwise, it is taken to be negative.
The work required to accelerate the rod from rest to a given angular speed is given by:
W = (1/2)Iω²
where I denotes the rod's moment of inertia and denotes the angular speed.The kinetic energy of the rod at time t is given by:
K = (1/2)Iω²
where again I is the moment of inertia and ω is the angular speed at time t.
Since the expressions for the work and kinetic energy have the same form, we can see that they are equal when the angular speed is such that:
ω² = 2W/I
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ1
A large air conditioner has a resistance of 6.0 Ωand an inductive reactance of 16 Ω . The air conditioner is powered by a 65.0 Hz generator with an rms voltage of 200 V .
A) Find the impedance of the air conditioner. Z=_____Ω
B)Find the rms current. Irms=______A
C)Find the average power consumed by the air conditioner. Pav=______W
A) The impedance of the air conditioner is approximately Z= 17.1 Ω.
B) The rms current is approximately 11.7 A.
C) The average power consumed by the air conditioner is approximately Pav= 820.14 W.
A) To find the impedance (Z) of the air conditioner, we can use the formula Z = √(R² + X_L²), where R is the resistance and X_L is the inductive reactance.
Z = √(6.0 Ω² + 16 Ω²) = √(36 + 256) = √292 ≈ 17.1 Ω
B) To find the rms current (I_rms), we can use the formula I_rms = V_rms / Z, where V_rms is the rms voltage.
I_rms = 200 V / 17.1 Ω ≈ 11.7 A
C) To find the average power (P_av) consumed by the air conditioner, we can use the formula P_av = I_rms² × R.
P_av = (11.7 A)² × 6.0 Ω ≈ 820.14 W
For more such questions on Impedance.
https://brainly.com/question/17137756#
#SPJ11
A transformer consists of 300 primary windings and 830 secondary windings.
A.) If the potential difference across the primary coil is 28.5 V , what is the voltage across the secondary coil? V2= ______________ V
B.) If the potential difference across the primary coil is 28.5 V , what is the current in the secondary coil if it is connected across a 140 Ω resistor? I = _____________ A
The voltage across the secondary coil is approximately 78.85 V. The current in the secondary coil when connected across a 140 Ω resistor is approximately 0.5632 A. We'll be using the terms primary windings, secondary windings, potential difference, voltage, current, and resistor.
A) To find the voltage across the secondary coil (V2), we can use the transformer equation:
V2 = (N2 / N1) * V1
where V1 is the voltage across the primary coil (28.5 V), N1 is the number of primary windings (300), and N2 is the number of secondary windings (830).
V2 = (830 / 300) * 28.5 V
V2 = 2.7667 * 28.5 V
V2 ≈ 78.85 V
B) To find the current in the secondary coil (I), we can use Ohm's law:
I = V2 / R
where V2 is the voltage across the secondary coil (78.85 V) and R is the resistance of the resistor (140 Ω).
I = 78.85 V / 140 Ω
I ≈ 0.5632 A
To know more about resistor refer here:
https://brainly.com/question/24297401#
#SPJ11
For a gas that obeys the equation of state as Vm = RT/P+b- a/RT^2 , does it have a critical point? If not, please justify your answer. If yes, please express Tc in terms of a and b. Both a and b are positive numerical constants.
A gas that obeys the equation of state Vm = RT/P + b - a/RT², does not have a critical point.
A critical point occurs when the first and second partial derivatives of the molar volume (Vm) with respect to pressure (P) are both equal to zero. This occurs at the critical temperature (Tc) and critical pressure (Pc).
Let's find the first and second partial derivatives of Vm with respect to P:
Vm(P, T) = RT/P + b - a/RT²
1) First partial derivative: ∂Vm/∂P
∂Vm/∂P = -RT/P²
2) Second partial derivative: ∂²Vm/∂P²
∂²Vm/∂P² = 2RT/P³
Now, we need to find the critical point where both partial derivatives are equal to zero:
1) -RT/P² = 0
2) 2RT/P³ = 0
Since both a and b are positive numerical constants, neither the first nor the second partial derivative will be equal to zero, as RT and P are always positive as well.
Therefore, for a gas that obeys the equation of state Vm = RT/P + b - a/RT², it does not have a critical point.
Learn more about critical point:
https://brainly.com/question/7805334
#SPJ11
What happens to light when it hits a translucent object?
Answer:
it reflects most of the light that falls on them
Explanation:
good luck
Explain how to prevent a transostor from going into cutoff or satiration when an input signal is applied.
To prevent a transistor from going into cutoff or saturation when an input signal is applied, proper biasing, signal limiting, coupling, and feedback can all contribute.
There are several measures that can be taken.
One method is to choose appropriate biasing resistors to set the DC voltage levels at the base, emitter, and collector terminals of the transistor. This will ensure that the transistor operates within its active region, avoiding cutoff or saturation. Additionally, the input signal should be limited to a certain range to avoid overdriving the transistor. A coupling capacitor can be used to block any DC voltage that may affect the biasing of the transistor.
Finally, a feedback loop can be implemented to stabilize the operating point of the transistor and prevent it from going into cutoff or saturation. Overall, proper biasing, signal limiting, coupling, and feedback can all contribute to preventing a transistor from going into cutoff or saturation when an input signal is applied.
Therefore, By following these steps, you can prevent a transistor from going into cutoff or saturation when an input signal is applied, ensuring proper and linear operation of the transistor.
To know more about transistor refer here :
https://brainly.com/question/1426190
#SPJ11
The energy of a photon is
Pick those that apply
A. h f divided by c
B. h c divided by lambda
C. h f
D. h
The correct answers are B and C for energy of a photon
h f divided by c and B. h c divided by lambda. These equations represent the relationship between the energy of a photon (E), its frequency (f), wavelength (lambda), and the Planck constant (h) and speed of light (c).
Hello! The energy of a photon can be calculated using the following formulas:
C. E = h × f, where E is the energy, h is Planck's constant, and f is the frequency of the photon.
B. E = (h × c) / λ, where E is energy, h is Planck's constant, c is speed of light, and λ (lambda) is the wavelength of the photon.
So, the correct answers are B and C.
Learn more about photon here:
https://brainly.com/question/29254702
#SPJ11
Halogen bulbs have some differences from standard incandescent lightbulbs. They are generally smaller, the filament runs at a higher temperature, and they have a quartz (rather than glass) envelope. They may also operate at lower voltage. Consider a 12 V, 50 W halogen bulb for use in a desk lamp. The lamp plugs into a 120 V, 60 Hz outlet, and it has a transformer in its base.
Part A) The 12 V rating of the bulb refers to the rms voltage. What is the peak voltage across the bulb?
A. 17V B. 12V C. 8.5V D. 24V
The peak voltage across the bulb is approximately 17V. The correct answer is A. 17V.
For the 12V, 50W halogen bulb in a desk lamp, you need to determine the peak voltage when the bulb's rating refers to the RMS voltage. The relationship between RMS voltage and peak voltage is:
RMS voltage = peak voltage / √2
To find the peak voltage, rearrange the equation:
peak voltage = rms voltage * √2
Given the RMS voltage is 12V:
peak voltage = 12V * √2 ≈ 12V * 1.414 ≈ 17V
So, the peak voltage across the bulb is approximately 17V. Your answer is A. 17V.
Learn more about RMS voltage here: https://brainly.com/question/18883096
#SPJ11
in your summer job with a venture capital firm, you are given funding requests from four inventors of heat engines. the inventors claim the following data for their operating prototypes:PrototypeA B C DTc (oC) low-temperature reservoir 47 17 -33 37TH (oC) high-temperature reservoir 192 227 267 147claimed efficiency e (%) 22 37 58 20a. based on the Tc anfd TH values for prototype A, find its maximum possible efficiencyb. based on the Tc and TH values for the prototype B, find its maximum posibble efficiencyc. based on the Tc and TH values prtotype C, find its maximum posibble afficiency
The maximum possible efficiency for prototype A is 75.52%, the maximum possible efficiency for prototype B is 92.58% and the maximum possible efficiency for the prototype is 87.64%.
To find the maximum possible efficiency of each heat engine prototype, we can use the Carnot efficiency formula, which is given by:
η = 1 - (Tc / TH)
Where η is the efficiency, Tc is the temperature of the low-temperature reservoir, and TH is the temperature of the high-temperature reservoir.
a. For Prototype A:
Tc = 47°C
TH = 192°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (47 / 192)
η ≈ 0.7552
The maximum possible efficiency for Prototype A is approximately 75.52%.
b. For Prototype B:
Tc = 17°C
TH = 227°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (17 / 227)
η ≈ 0.9258
The maximum possible efficiency for Prototype B is approximately 92.58%.
c. For Prototype C:
Tc = -33°C
TH = 267°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (-33 / 267)
η ≈ 0.8764
The maximum possible efficiency for Prototype C is approximately 87.64%.
Please note that these calculations assume ideal conditions and do not take into account any practical limitations or inefficiencies that may exist in the prototypes.
The maximum possible efficiency for Prototype A is approximately 75.52%. The maximum possible efficiency for Prototype B is approximately 92.58%.The maximum possible efficiency for Prototype C is approximately 87.64%.
To practice more questions about the Carnot engine:
https://brainly.com/question/17200911
#SPJ12
at constant temperature and pressure the sign of the free energy related to spontaneity of process. of a process is spontaneous in the forward direction, then the sign of δg is what?
If a process is spontaneous in the forward direction at constant temperature and pressure, then the sign of ΔG is negative. This indicates that the process is exergonic and releases energy.
Conversely, if a process is spontaneous in the reverse direction, then the sign of ΔG is positive, indicating that the process is endergonic and requires energy input.
This is because the criterion for spontaneity at constant temperature and pressure is that the total entropy of the universe increases, or ΔS_univ > 0. T
he change in free energy is related to the change in entropy and enthalpy by the equation:ΔG = ΔH - TΔSwhere ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.
If the process is spontaneous in the forward direction, then ΔS is positive (since the entropy of the system increases) and ΔH is negative (since the system releases heat).
Therefore, ΔG is negative:ΔG = ΔH - TΔS < 0
So, if a process is spontaneous in the forward direction, the sign of ΔG is negative.
For more questions on temperature and pressure - https://brainly.com/question/29321317
#SPJ11
Describe in words what you see happen wben you makn the connection. Describe in words what happena when the eireuit in unconpected and dos not make a consplete loop.
When a circuit is made, electricity is able to flow from the power source, through the circuit, and back to the power source. This creates a complete loop, and electricity is able to be used.
When the circuit is disconnected, the loop is broken and electricity cannot flow. This is because there is no path to complete the circuit. No electricity is able to flow, and the device connected to the circuit will not work.
In some cases, the lack of a complete circuit can cause a short circuit and potentially damage the device. In order to make sure a circuit is complete, all of the wiring must be connected properly and securely. If a wire is loose or broken, the circuit will not be complete and the device will not work.
Know more about circuit here
https://brainly.com/question/27206933#
#SPJ11
a. Calculate the centripetal force exerted on a vehicle of mass m=1630 kg that is moving at a speed of 13.9 m/s around a curve of radius R=385 m.
b. Which force plays the role of the centripetal force in this case?
a. force of static friction
b. spring force
c. gravitational force
d. normal force
e. tension force
a. Fc = (m * v^2) / R
where m is the mass of the vehicle, v is the velocity of the vehicle, and R is the radius of the curve.
Plugging in the values, we get:
Fc = (1630 kg * (13.9 m/s)^2) / 385 m
Fc = 8206.73 N
Therefore, the centripetal force exerted on the vehicle is 8206.73 N.
b. The force that plays the role of the centripetal force in this case is the force of static friction.
*IG:whis.sama_ent
Review of the woman, the barbell, and the Earth (Section 7.9 in the textbook). Starting from rest, a woman lifts a barbell with a constant force F through a distance h, at which point she is still lifting, and the barbell has acquired a speed v. Let Ewoman stand for the following energy terms associated with the woman:
Ewoman = Echemical,woman + Kwoman (moving arms etc.) + Ugrav,woman+Earth + Ethermal,woman
The change in the kinetic energy of the barbell is (1/2)mv2 - 0 = (1/2)mv2.
The general statement of the energy principle is deltacapEsys = Wext. We'll consider terms on the left side of the equation (the deltacapEsys side, changes in the energy inside the system) and terms on the right side (the Wext side, energy inputs from the surroundings).
I. System: Woman + barbell + Earth For the system consisting of the woman, the barbell, and the Earth, which of the following terms belong on the left side of the energy equation (the deltaEsys side)?
deltaEwoman
-mgh
-Fh
Fh
-(1/2)mv2
+mgh
none of these terms (left side is 0)
(1/2)mv2
For the system consisting of the woman, the barbell, and the Earth, which of the following terms belong on the right side of the energy equation (the Wext side)?
Fh
-mgh
+mgh
-(1/2)mv2
deltaEwoman
-Fh none of these terms (right side is 0)
(1/2)mv2
II. System: barbell only For the system consisting of the barbell only, which of the following terms belong on the left side of the energy equation (the deltacapEsys side)?
eltacapEwoman
-mgh
+mgh
-(1/2)mv2
Fh (1/2)mv2 n
one of these terms (left side is 0)
-Fh
For the system consisting of the barbell only, which of the following terms belong on the right side of the energy equation (the Wext side)?
-Fh
-mgh
+mgh
(1/2)mv2
-(1/2)mv2
Fh
none of these terms (right side is 0)
ΔEwoman
III. System: barbell + Earth For the system consisting of the barbell and the Earth, which of the following terms belong on the left side of the energy equation (the Esys side)?
-Fh
-(1/2)mv2
Fh
(1/2)mv2
none of these terms (left side is 0)
ΔEwoman
+mgh
-mgh
For the system consisting of the barbell and the Earth, which of the following terms belong on the right side of the energy equation (the Wext side)?
1/2)mv2
ΔEwoman
+mgh
-(1/2)mv2
none of these terms (right side is 0)
Fh
-mgh
-Fh
I. System: Woman + barbell + Earth For the system consisting of the woman, the barbell, and the Earth, the terms on the left side of the energy equation (the deltaEsys side) are: deltaEwoman, -Fh, and (1/2)mv2.
What is equation?An equation is a mathematical statement that expresses the equality of two expressions. It consists of two expressions separated by an equal sign (=). Equations are used to solve a wide range of mathematical problems, from basic arithmetic to complex calculus. Equations can be written using numbers, variables, and various mathematical operations such as addition, subtraction, multiplication, division, and exponentiation.
On the right side of the equation (the Wext side), there are no terms as the energy input is 0.
II. System: barbell only For the system consisting of the barbell only, the terms on the left side of the energy equation (the deltaEsys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.
III. System: barbell + Earth For the system consisting of the barbell and the Earth, the terms on the left side of the energy equation (the Esys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.
To learn more about equation
https://brainly.com/question/25699025
#SPJ1
The resistivity of gold is 2.44 × 10-8 ohm · m at a temperature of 20°C. A gold wire, 0.5 mm in diameter and 44 cm long, carries a current of 380 ma. The number of electrons per second passing agiven cross section of the wire is closest to:
A) 6.3 × 10^15 B) 2.4 × 10^17 C) 1.2 × 10^22 D) 2.8 × 10^14 E) 2.4 × 10^18
The number of electrons per second passing a given cross section of the wire is closest to is 2.4 × 10¹⁷, so option (b) is correct.
What is current?It derived the namesake Ampère's law from this finding, which connects the size of the force between two conductors to the length of the wires and the current's strength. It designated the energy charge flow as "intensity courant," which is French for "current intensity," and assigned it the letter "I."
What is temperature ?
Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature) according to the energy.
Therefore, The number of electrons per second passing a given cross section of the wire is closest to is 2.4 × 10¹⁷, so option (b) is correct.
To know more about energy check the below link:
https://brainly.com/question/28109294
#SPJ1
The plane of a rectangular coil of dimension 5 cm by 8 cm is perpendicular to the direction of a magnetic field B. The coil has 147 turns and a total resistance of 12.7 .
At what rate must the magnitude of B change in order to induce a current of 0.392 A in the windings of the coil?
Answer in units of T/s.
At 1.29 T/s rate must the magnitude of B change in order to induce a current of 0.392 A in the windings of the coil.
Using Faraday's Law, we can relate the induced EMF (voltage) to the rate of change of magnetic flux through the coil:
[tex]EMF = -N(dΦ/dt)[/tex]
where N is the number of turns in the coil, and Φ is the magnetic flux through the coil. The negative sign indicates that the induced EMF opposes the change in flux.
We can also relate the EMF to the current and resistance:
EMF = IR
Combining these equations, we can solve for the rate of change of magnetic flux:
[tex](dΦ/dt) = -EMF/N = (-IR)/N[/tex]
Plugging in the given values, we get:
[tex](dΦ/dt) = (-0.392 A x 12.7 Ω) / 147 = -0.0337 Wb/s[/tex]
Since the magnetic field is perpendicular to the plane of the coil, the magnetic flux through the coil is given by: [tex]Φ = BAN[/tex]
where A is the area of the coil (5 cm x 8 cm = 0.04 m^2). Solving for the rate of change of magnetic field:
[tex](dB/dt) = (dΦ/dt) / AN = (-0.0337 Wb/s) / (0.04 m^2 x 147) = -1.29 T/s[/tex]
Therefore, the magnitude of the magnetic field must decrease at a rate of 1.29 T/s in order to induce a current of 0.392 A in the coil.
learn more about magnitude here:
https://brainly.com/question/30881682
#SPJ11
A point charge has a charge of 2.50×10−11 C .
Part A
At what distance from the point charge is the electric potential 84.0 V ? Take the potential to be zero at an infinite distance from the charge.
d = ___ m
Part B
At what distance from the point charge is the electric potential 25.0 V ? Take the potential to be zero at an infinite distance from the charge.
d = ___ m
Please LOOK HERE, someone already tried and gave me the wrong answers, so please dont repeat the same wrong answer http://www..com/homework-help/questions-and-answers/point-charge-charge-250-10-11-c--part-distance-point-charge-electric-potential-840-v-take--q7787819
Part a) the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m. Part b) the distance from the point charge where the electric potential is 25.0 V is 9.00 x 10⁻³ m.
The electric potential (V) at a certain distance (d) from a point charge (q) can be calculated using the formula:
V = k x q/d
where k is Coulomb's constant (k = 9.0 x 10⁹ N*m₂/C²).
Part A:
We know that the electric potential is 84.0 V and the charge of the point charge is 2.50 x 10^-11 C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
84.0 V = (9.0 x 10⁹ N x m/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm₂/C²) x (2.50 x 10⁻¹¹ C) / 84.0 V
d = 6.77 x 10⁻³ m
Therefore, the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m.
Part B:
We know that the electric potential is 25.0 V and the charge of the point charge is 2.50 x 10⁻¹¹ C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
25.0 V = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / 25.0 V
d = 9.00 x 10⁻³ m
Learn more about electric potential here
https://brainly.com/question/12645463
#SPJ11
1)An oscillating object takes 0.10 s to complete one cycle; that is, its period is 0.10 s.  What is its frequency f? Express your answer in hertz.
2)If the frequency is 40Hz, what is the period T ?
Express your answer in seconds.
1) The frequency is 10 Hz. 2) The period is 0.025 s.
1) To find the frequency (f) of an oscillating object with a period of 0.10 s, you can use the following formula:
f = 1/T
where f is the frequency and T is the period.
In this case, T = 0.10 s. Plugging in the value, we get:
f = 1/0.10
f = 10 Hz
So, the frequency of the oscillating object is 10 Hz.
2) To find the period (T) of an oscillating object with a frequency of 40 Hz, you can use the same formula:
T = 1/f
where T is the period and f is the frequency.
In this case, f = 40 Hz. Plugging in the value, we get:
T = 1/40
T = 0.025 s
So, the period of the oscillating object is 0.025 seconds.
Know more about frequency here:
https://brainly.com/question/254161
#SPJ11
When examining patterns of the planets within our solar system which one of the statements below is NOT true? * The "inner" planets tend to be smaller and rocky; the "outer" planets tend to be large and gaseous The farther a planet is away from the Sun, the longer the period of revolution tends to be The farther the planet is away from the Sun, the lower the average temperature tends to be The farther the planet is away from the Sun, the shorter the period of rotation tends to be
The following assertion is untrue: "The shorter the period of rotation tends to be, the farther the planet is from the Sun."
The inner planets are rocky, but why?The inner planets are rocky, whereas the outer planets are gaseous, which can be attributed to the early solar system's temperature. The solar system's temperature increased as the gases came together to create a protosun. Temperatures in the inner solar system reached 2000 K, whilst, in the outer solar system, it was only 50 K.
Which planets contain rocks?Because of their compact, rocky surfaces akin to Earth's terra firma, the planets Mercury, Venus, Earth, and Mars are referred to as terrestrial. The four planets closest to the sun are the terrestrial planets.
to know more about solar systems here:
brainly.com/question/12075871
#SPJ1
What is the magnitude of the electric field at the origin produced by a semi-circular arc of charge = 3.6 μc, twice the charge of the quarter-circle arc?
The magnitude of the electric field at the origin produced by a semi-circular arc of charge (3.6 μC) is 4 times the electric field produced by the quarter-circle arc.
To find the electric field at the origin produced by the semi-circular arc of charge, we first consider the electric field produced by a quarter-circle arc. If we know the electric field produced by the quarter-circle arc, we can multiply it by 4 to find the electric field produced by the semi-circular arc since it has twice the charge and twice the length.
1. Determine the charge of the quarter-circle arc (1.8 μC).
2. Calculate the electric field produced by the quarter-circle arc using the formula E = kQ/r², where E is the electric field, k is the electrostatic constant (8.99 x 10⁹ N m²/C²), Q is the charge (1.8 μC), and r is the distance from the charge to the origin.
3. Multiply the electric field of the quarter-circle arc by 4 to find the electric field of the semi-circular arc.
Following these steps will give you the magnitude of the electric field at the origin produced by the semi-circular arc of charge.
To know more about electric field click on below link:
https://brainly.com/question/15800304#
#SPJ11
An object whose height is 3.5 cm is at a distance of 10.5 cm from a spherical concave mirror. Its image is real and has a height of 10.6 cm. Calculate the radius of curvature of the mirror.Use the mirror equation and the relation between the radius and the focal length.. How far from the mirror is it necessary to place the above object in order to have a virtual image with a height of 10.6 cm?
The object needs to be placed 14.5 cm in front of the mirror to form a virtual image with a height of 10.6 cm.
[tex]1/f = 1/d_o + 1/d_i[/tex]
m =[tex]-h_i/h_o[/tex] = -10.6/3.5 = -3.03
m = [tex]-d_i/d_o[/tex]
-3.03 = -d[tex]_i/10.5[/tex]
[tex]d_i =[/tex] 31.8 cm
[tex]1/f = 1/10.5 + 1/31.8[/tex]
f = -33.8 cm
[tex]1/f = 2/R[/tex]
So we can solve for R:
[tex]1/-33.8 = 2/R[/tex]
R = -67.6 cm
The radius of curvature of the mirror is -67.6 cm.
[tex]m = h_i/h_o = 10.6/h_o[/tex]
[tex]10.6/h_o = 10.6/3.5[/tex]
[tex]h_o = 3.5 cm[/tex]
Now we can use the mirror equation again to find the image distance:
[tex]1/f = 1/d_o + 1/d_i[/tex]
Since the image is virtual, d_i is negative:
[tex]1/-33.8 = 1/10.5 + 1/d_i[/tex]
[tex]d_i = -14.5 cm[/tex]
A mirror is a surface that reflects light, sound, or other waves. Mirrors can be made of various materials such as glass, metal, or plastic, and can have different shapes and curvatures to achieve specific optical properties. When light waves hit a mirror, they bounce off at an angle that is equal to the angle of incidence, according to the law of reflection.
This allows us to see our reflection in a mirror, as well as to use mirrors in various applications such as telescopes, microscopes, and lasers. Mirrors can also be used to create optical illusions, such as in a funhouse mirror or in a kaleidoscope. In addition, mirrors play a crucial role in certain scientific experiments, such as those involving lasers or in the study of light and optics.
To learn more about Mirror visit here:
brainly.com/question/3795433
#SPJ4
Which one of the following polar values is equivalent to 30+ j40?
a.70 253.1°
b. 50 236.9°
c. 50253.1°
d. 70 236.9°
The polar form of the complex number is z = 50∠53.13°.(C)
The polar form of a complex number can be represented as z = r∠θ, where r is the magnitude and θ is the angle in degrees or radians. To convert a complex number from rectangular form to polar form, we can use the following formulas:
r = |z| = √(Re(z)² + Im(z)²)
θ = arg(z) = tan⁻¹(Im(z) / Re(z))
where Re(z) and Im(z) are the real and imaginary parts of the complex number, respectively.
For the complex number 30 + j40, we have:
|z| = √(30² + 40²) = 50
arg(z) = tan⁻¹(40 / 30) = 53.13°(C)
To know more about polar form click on below link:
https://brainly.com/question/11741181#
#SPJ11
Ball a has half the mass and eight times the kinetic energy of ballb. what is the speed ratio va / vb ? a. 4 b. 1/4 c. 2 d. 16 d. 1/16
The speed ratio va/vb would be 4. Thus, the answer is option a.
What's kinetic energyThe kinetic energy of a moving object is directly proportional to its mass and the square of its speed
In this scenario, ball a has half the mass of ball b but eight times its kinetic energy.
This means that the speed of ball a is greater than that of ball b. To find the speed ratio, we can use the formula for kinetic energy:
KE = (1/2)mv^2.
If we assume the velocity of ball b to be v, then the velocity of ball a would be sqrt((8/0.5)v^2) = 4v.
Learn more about kinetic energy at
https://brainly.com/question/26472013
#SPJ11
A light beam travels at 1.34×10^8m/s indiamond. The wavelength of the light indiamond is 246 nm.(a)What is the index of refraction of diamondat this wavelength?(b) If this same light travels through air, whatis its wavelength there?(c) If the light ray hits the surface of the diamond at the angle of 15° with thenormal, at which angle will it be refracted into air?
For the light beam
a) The index of refraction is 2.24.
b) The wavelength of the same light in air is 551.04 nm.
c) the angle is 17.14°.
Finda) The index of refractionb) The wavelengthc) The angle of refraction(a) The refraction index of the diamond at this wavelength can be found using the formula n=c/v, where c is the speed of light in a vacuum and v is the speed of light in a diamond.
n = c/v = 3.00 x 10^8 m/s / 1.34 x 10^8 m/s = 2.24
Therefore, the index of refraction of the diamond at this wavelength is 2.24.
(b) When light travels through air, its wavelength changes due to the change in the medium, but its frequency remains the same. The relationship between the speed, frequency, and wavelength of light is given by the formula c = λf, where c is the speed of light, λ is the wavelength, and f is the frequency.
We can rearrange this formula to solve for the new wavelength:
λ_air = c/f = (c/v) λ_diamond = n λ_diamond
where n is the index of refraction of a diamond. Substituting the values given,
λ_air = 2.24 x 246 nm = 551.04 nm
Therefore, the wavelength of the same light in air is 551.04 nm.
(c) According to Snell's law, n1 sinθ1 = n2 sinθ2, where n1 and n2 are the indices of refraction of the initial and final mediums, and θ1 and θ2 are the angles of incidence and refraction, respectively, with respect to the normal.
We can rearrange this formula to solve for θ2:
sinθ2 = (n1 / n2) sinθ1
Substituting the values given, we get:
sinθ2 = (1 / 2.24) sin 15°
θ2 = sin⁻¹(0.295) = 17.14°
Therefore, the angle at which the light ray will be refracted into the air is 17.14°.
Leran more about Snell's law
brainly.com/question/2273464
#SPJ11
Q1= -0.10 uC is located at the origin. Q2= +10 uC is located on the positive x axis at x = 1.0m. Which of the following is true of the force on Q1 due to Q2?
a) it is attractive and directed in the +x direction
b) it is attractive and directed in the -x direction
c) it is repulsive and directed in the +x direction
d) it is repulsive and directed in the -x direction
The force on Q1 due to Q2 is attractive and directed in the +x direction. The correct option is a). To determine the correct answer, we'll use Coulomb's Law which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
The charges are Q1 = -0.10 μC (located at the origin) and Q2 = +10 μC (located on the positive x-axis at x = 1.0m).
Since Q1 is negative and Q2 is positive, the force between them will be attractive. This is because opposite charges attract each other. The attractive force on Q1 will be directed towards Q2, which is in the positive x direction.
Therefore, it is attractive and directed in the +x direction.
To know more about Coulomb's Law refer here:
https://brainly.com/question/506926#
#SPJ11
at about 10.∘c, a sample of pure water has a hydronium concentration of 5.4×10−8 m. what is the equilibrium constant, kw, of water at this temperature?
The equilibrium constant (Kw) of water at 10°C is 5.4×10^(-14) mol^2/L^2.
At 25°C, the commonly used value for Kw is 1.0×10^(-14) mol^2/L^2, which represents the equilibrium constant for the autoionization of water, where water molecules dissociate into hydronium ions (H3O+) and hydroxide ions (OH-).
Kw is defined as Kw = [H3O+][OH-], where [H3O+] and [OH-] are the concentrations of hydronium and hydroxide ions in mol/L, respectively. However, at lower temperatures, the concentration of hydronium ions decreases due to the lower ionization rate of water.
In this case, the given concentration of hydronium ions at 10°C is 5.4×10^(-8) mol/L, so Kw can be calculated as
Kw = [H3O+][OH-] = (5.4×10^(-8))(5.4×10^(-8)) = 2.916×10^(-15) mol^2/L^2, which is the equilibrium constant for water at 10°C.
For more questions like Equilibrium click the link below:
https://brainly.com/question/31027606
#SPJ11
Take P1 = 8 kip and P2 = 4 kip. Determine the absolute maximum shear stress developed in the beam.
To determine the absolute maximum shear stress in a beam with given loads P1 and P2, we need to consider several factors, such as the beam's cross-sectional area and the distribution of the loads. These are not given In this case, so we cant find exact absolute maximum shear stress developed
First, identify the critical points where the maximum shear stress is likely to occur, which are usually at the supports and points of load application. Next, find the internal shear force (V) at each of these critical points. This can be done using equilibrium equations or shear force diagrams.
Once you have the internal shear force values, the absolute maximum shear stress can be calculated using the following formula: τ_max = VQ/Ib
Where τ_max is the maximum shear stress, V is the internal shear force, Q is the first moment of area about the neutral axis, I is the moment of inertia of the beam's cross-section, and b is the width of the beam's cross-section at the location of interest.
Calculate the maximum shear stress at each critical point and compare the values. The highest value among them will be the absolute maximum shear stress developed in the beam.
Know more about shear stress here:
https://brainly.com/question/14418799
#SPJ11