) a particle is moving along a curve xy2 = 12. as it passes through the point (3, 2), its x position is changing at a rate of 3cm/sec. how fast is y changing at that instant?

Answer:

B

Step-by-step explanation:

I put the equations into math-way and it solved the system of equations. X=10 and Y=14.

10 three-point questions and 14 five-point questions

The value of p3 for which the set s is linearly dependent is p3 = 1

To find the value of p3 for which s is linearly dependent, we need to find values of p3 such that at least one of the vectors in the set s can be written as a linear combination of the other vectors in the set.

Let's start by setting up the linear combination equation:

c1(t − t^2) + c2(t^2 − t^3) + c3(1 − t t^3) = 0

where c1, c2, and c3 are constants that represent the coefficients of the linear combination.

Next, we can expand the terms and group them by powers of t:

(c1 − c2)t^2 + (-c1 + c2 + c3)t + (c3) = 0

For this equation to have a non-trivial solution (i.e., not all c1, c2, and c3 are zero), the determinant of the coefficient matrix must be zero:

det

|1 -1 0|

|-1 1 1|

|0 -1 p3|

= 0

Expanding the determinant, we get:

1(1-p3) - (-1)(-p3) + 0(1) = 0

Simplifying this equation, we get:

p3 - 1 = 0

Therefore, the value of p3 for which the set s is linearly dependent is p3 = 1

Learn more about vectors

brainly.com/question/29740341

#SPJ11

There might be a typo in the interval you provided, as it should be written in ascending order, such as [a, b] with a < b. I'll assume you meant the interval [2, 14]. Now, let's analyze the function f(x) = 1/ln(3x) and find its absolute maximum and minimum on the interval [2, 14].

Step 1: Find the critical points
To find the critical points, we need to find the derivative of the function f(x) and set it equal to zero.

f(x) = 1/ln(3x)
Using the chain rule, we find the derivative:
f'(x) = -1/(ln(3x))^2 * (1/x)

Now, we need to find when f'(x) = 0 or when f'(x) is undefined. Since the derivative is a fraction, it is never equal to zero. However, the function is undefined when the denominator is zero. In this case, there's no value of x in the interval [2, 14] that makes the denominator zero.

Step 2: Analyze the endpoints
Since there are no critical points within the interval, we only need to check the values of the function at the endpoints.

f(2) = 1/ln(6)
f(14) = 1/ln(42)

Step 3: Determine the absolute maximum and minimum
Compare the values at the endpoints:
f(2) > f(14) as ln(6) < ln(42)

Thus, the function f(x) has an absolute maximum at x = 2 and an absolute minimum at x = 14 within the interval [2, 14].

To learn more about “critical points” refer to the https://brainly.com/question/7805334

#SPJ11  

The arc length is approximately 20.5744 units.

To find the arc length from (0, 4) clockwise to (3, 7) along the circle[tex]x^2 + y^2 = 16.[/tex]

We need to first find the angle between the positive x-axis and the line connecting the center of the circle to the point (3, 7), since the arc length is a fraction of the circumference of the circle.

The center of the circle is at (0, 0), and the line connecting (0, 0) to (3, 7) has a slope of (7-0)/(3-0) = 7/3.

Therefore, the angle between the positive x-axis and this line is given by:

θ = arctan(7/3) ≈ 1.1659045 radians

Since we are traveling clockwise from (0, 4) to (3, 7), we are traversing an angle of 2π - θ, which is approximately 5.1766375 radians.

The circumference of the circle is given by 2πr, where r is the radius of the circle. In this case, the radius is 4, so the circumference is 8π.

The fraction of the circumference that we travel along is the ratio of the angle we traverse to the total angle around the circle, which is 2π.

Therefore, the arc length is:

(5.1766375 radians / 2π) × 8π = 20.5744

Rounding to four decimal places, the arc length is approximately 20.5744 units.

Learn more about arc length of a circular segment.

brainly.com/question/26854963

#SPJ11

The probability that the weight of 36 babies born at the hospital will be between 7.4 and 6.5 pounds is approximately 0.9089 or 90.89%.

a) The values of the parameters are:

Mean (μ) = 7.3 pounds

Standard deviation (σ) = 0.65 pounds

b) As we don't have the sample data, we can't calculate the sample mean (μx) and sample standard deviation (σx or s).

c) To find the probability that the weight of 36 babies will be between 7.4 and 6.5 pounds, we need to use the central limit theorem as the sample size is large enough (n=36).

First, we need to standardize the values using the formula:

z = (x - μ) / (σ / sqrt(n))

where x is the value we want to find the probability for, μ and σ are the population mean and standard deviation respectively, and n is the sample size.

For 7.4 pounds:

z1 = (7.4 - 7.3) / (0.65 / sqrt(36)) = 1.38

For 6.5 pounds:

z2 = (6.5 - 7.3) / (0.65 / sqrt(36)) = -2.46

Next, we need to find the probability of z-values using a standard normal distribution table or calculator.

Using the standard normal distribution table, the probability of z1 = 1.38 is 0.9157, and the probability of z2 = -2.46 is 0.0068.

Finally, we can find the probability that the weight of 36 babies will be between 7.4 and 6.5 pounds by subtracting the probability of z2 from the probability of z1:

P(6.5 ≤ x ≤ 7.4) = P(z2 ≤ z ≤ z1) = P(z ≤ 1.38) - P(z ≤ -2.46) = 0.9157 - 0.0068 = 0.9089

Therefore, the probability that the weight of 36 babies born at the hospital will be between 7.4 and 6.5 pounds is approximately 0.9089 or 90.89%.

To learn more about parameters visit:

https://brainly.com/question/30757464

#SPJ11

The measure of <RWY is 60 degree.

We have,

YMX = (YM) + (MX)

YMX = (4x-49) + (3x+4)

(YMX) = 7x - 45

Now, (YMX - TN) /2 = <TKN

(7x- 45 - 43)/2 = <TKN

5x -77 = 7x - 88 /2

10x - 154 = 7x-88

x=22

Now, (RY) = 6x-82 = 50

and, (MX) = 3x+4 = 70

So, the measure of <RWY

= (50+70)/2 = .60

Learn more about Arc here:

https://brainly.com/question/18741430

#SPJ1

Answer: 5,040

Step-by-step explanation: The value of 7P6 is 5,040. To evaluate this, you can use the formula for permutations: nPr = n! / (n - r)!, where n is the total number of items and r is the number of items being selected. In this case, n = 7 and r = 6, so 7P6 = 7! / (7 - 6)! = 7! / 1! = 5,040.

The margin of error for the duration of telephone calls directed by a local telephone company is approximately 0.511 minutes or 30.66 seconds, with a 98% confidence level.

Given the provided information, we can use the following terms to calculate the margin of error:

1. Standard deviation (s) = 4.5 minutes
2. Sample size (n) = 420 calls
3. Confidence level = 98%

First, let's find the critical value (z-score) for a 98% confidence level. Using a standard normal distribution table, we can determine that the critical value is approximately 2.33.

Next, we need to find the standard error. The standard error (SE) is calculated as follows:

SE = s / √n
SE = 4.5 / √420
SE ≈ 0.2195

Now that we have the critical value and standard error, we can calculate the margin of error (ME) using the formula:

ME = z-score * SE
ME = 2.33 * 0.2195
ME ≈ 0.511

Thus, the margin of error for the duration of telephone calls directed by a local telephone company is approximately 0.511 minutes or 30.66 seconds, with a 98% confidence level. This means that the true mean duration of telephone calls is likely to be within 0.511 minutes (or 30.66 seconds) of the sample mean.

To know more about margin of error (ME) refer here:

https://brainly.com/question/13034570

#SPJ11

The system of linear functions for the graph below is given as follows:

The slope-intercept representation of a linear function is given by the equation presented as follows:

y = mx + b

The coefficients of the function and their meaning are described as follows:

For the first line, we have that:

Hence the equation is:

y = -0.5x + 1.

For the second line, we have that:

Hence the equation is:

y = -4x - 6.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

Answer:

[tex]a. \quad \dfrac{\boxed{1}}{\boxed{3}}} \cdot \dfrac{\boxed{1}}{\boxed{2}}} = \dfrac{\boxed{1}}{\boxed{6}}}\\\\\\\\b. \quad \dfrac{\boxed{1}}{\boxed{3}}} \cdot \dfrac{\boxed{1}}{\boxed{3}}} = \dfrac{\boxed{1}}{\boxed{9}}}\\\\\\\\c. \quad \dfrac{\boxed{21}}{\boxed{26}}} \cdot \dfrac{\boxed{5}}{\boxed{26}}} = \dfrac{\boxed{105}}{\boxed{676}}}\\[/tex]

Step-by-step explanation:

a.

When rolling a die(number cube) the sample space which is the set of all possible outcomes is {1, 2, 3, 4, 5, 6}

The probability of getting any single number on the face is the same = 1/6

For the first cube
P(3) = 1/6 and P(4) = 1/6
P(3 or 4) = P(3) + P(4) = 1/6 + 1/6 = 2/6 = 1/3

For the second cube
P(odd) = P(1 or 3 or 5) = P(1) + P(3) + P(5) = 1/6 + 1/6 + 1/6 = 3/6 = 1/2

So the combined probability that the first cube shows 3 or 4 and the second an odd is given by
1/3 · 1/2 = 1/6

b.
There are three coins a penny, dime and quarter

Probability of selecting a penny = number of pennies/total number of coins = 1/3

Since we are replacing the selected coin for the second draw, the probability of selecting a penny is just the same as before = 1/3

P(selecting 2 pennies with replacement) = 1/3 · 1/3 = 1/9

c.

There are a total of 26 letters in the alphabet
There are 5 vowels in the alphabet: A, E, I, O, U

Therefore there are 26 - 5 = 21 consonants

P(drawing a consonant) = 21/26

P(drawing a vowel) = 5/26

Since we are replacing the first drawn letter, these probabilities do not change with successive draws.

Therefore
P(consonant first draw and vowel second draw)

= P(consonant) · P(vowel)

= 21/26 · 5/26

=105/676

Here the length of VT is equal to (x-1) which is equal to 6 and SC is equal to (2x-17) which is equal to 3.

So x=7, VT=6 and SC=3.

Explain length

Length is a fundamental physical quantity used to measure the size of an object or the distance between two points. It is expressed in units such as meters, centimetres, or feet and is used in various fields such as mathematics and physics. The length of a straight line is calculated by finding the distance between its endpoints, while the length of two-dimensional shapes such as rectangles is measured by their perimeter.

According to the given information

We can use the following steps to find x:

Find the length of ST using Pythagoras' theorem as follows:

SV = RV + RS = RV + RT = 6 + (2x - 17) = 2x - 11

UT = UV + VT = 12 + (x - 1) = x + 11

ST² = SV² + UT²

(2x - 11)² + (x + 11)² = ST²

Find the length of VT using Pythagoras' theorem as follows:

TV² = UT² - UV²

TV² = (x + 11)² - 12²

Substitute TV² into the equation in step 1 and solve for x.

After solving for x, we get x=7.

Therefore, VT is equal to (x-1) which is equal to 6 and SC is equal to (2x-17) which is equal to 3.

So x=7, VT=6 and SC=3.

To know more about length visit

brainly.com/question/8552546

#SPJ1

The volume of the solid obtained by rotating the region bounded by the curves y = x², y = 0, and x = 1 about the y-axis is π/3 cubic units.

To find the volume of the solid obtained by rotating the region bounded by the curves y = x², y = 0, and x = 1 about the y-axis, we can use the disk method.

The idea behind the disk method is to slice the solid into thin disks perpendicular to the axis of rotation and sum up their volumes. The volume of each disk is the product of its cross-sectional area and its thickness.

In this case, we are rotating about the y-axis, so the cross-sectional area of each disk will be a circle with radius x and area πx². The thickness of each disk will be dx, which represents an infinitesimal slice of the x-axis.

Thus, the volume of each disk is given by:

dV = πx² dx

To find the total volume of the solid, we need to integrate this expression over the range of x from 0 to 1:

V = ∫₀¹ πx² dx

Integrating this expression gives:

V = π/3

Therefore, the volume of the solid obtained by rotating the region bounded by the curves y = x², y = 0, and x = 1 about the y-axis is π/3 cubic units.

Learn more about disk method

brainly.com/question/28184352

#SPJ11

By Cavalieri's Principle, the volume of that slanted cylinder will be the same volume of a non-slanted cylinder with the same altitude.

so we have a cylinder with a radius of 3 and a height of 7 and a cone hitching a ride on it, with a radius of 3 and a height of 3, so let's simply get the volume of each.

[tex]\textit{volume of a cylinder}\\\\ V=\pi r^2 h~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ h=7\\ r=3 \end{cases}\implies V=\pi (3)^2(7) \\\\[-0.35em] ~\dotfill\\\\ \textit{volume of a cone}\\\\ V=\cfrac{\pi r^2 h}{3}~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ h=3\\ r=3 \end{cases}\implies V=\cfrac{\pi (3)^2(3)}{3} \\\\[-0.35em] ~\dotfill\\\\ \pi (3)^2(7)~~ + ~~\cfrac{\pi (3)^2(3)}{3}\implies 63\pi +9\pi \implies 72\pi ~~ \approx ~~ \text{\LARGE 226.19}~in^3[/tex]

The correct answer is: t = 2.293, p-value < 0.01, reject the null hypothesis, and conclude that the mean weight of the citizens has increased.

To test the hypothesis, we need to use a one-sample t-test since we are comparing the mean weight difference of the sample to zero (no change). The sample mean weight difference is 3.51, and the sample standard deviation is 7.44. Since we do not know the population standard deviation, we use the t-distribution.

The null hypothesis is that the mean weight difference is equal to zero (no change), and the alternative hypothesis is that the mean weight difference is greater than zero (increase in weight).

Using a significance level of 0.01, the critical t-value for a one-tailed test with 40 degrees of freedom is 2.704. The calculated t-value is (3.51-0)/(7.44/sqrt(41)) = 2.293. The p-value associated with this t-value is less than 0.01 (found using a t-distribution table or calculator).

Since the p-value is less than the significance level, we reject the null hypothesis and conclude that the mean weight of the citizens of Pawnee significantly increased after drinking the new candy bar milkshake for a week. Therefore, the correct answer is: t = 2.293, p-value < 0.01, reject the null hypothesis, and conclude that the mean weight of the citizens has increased.

The 95% confidence interval for the mean difference in weight (1.163 , 5.857) also supports this conclusion since it does not include zero.

To learn more about significance level, refer below:

https://brainly.com/question/13947717

#SPJ11

Recall that any non-zero number raised to the power of 0 is equal to 1. Therefore, 8^0 = 1.

To rewrite the expression using only positive exponents, we can use the following rules of exponents:

a^(-n) = 1 / a^n

a^0 = 1

Using these rules, we can rewrite the expression as:

4^(-2) x 8^0 x 5^6

= (1/4^2) x 1 x 5^6

= 1/16 x 5^6

Therefore, the expression 4 to the power of negative 2 times 8 to the power of 0 times 5 to the power of 6, rewritten using only positive exponents, is 1/16 x 5^6.

Answer:

It's 84

Step-by-step explanation:

To calculate the area of a triangule you need to use this formula:

B * H / 2

So:

12 * 14 / 2 = 84

Hope this helps :)

Pls brainliest...

The percentage change in the interest rate is -80%. This means that the interest rate needs to be reduced by 80% to achieve an increase in the amount of money by 25% in t/2 years time.

The interest on a loan or principal sum can be easily calculated using simple interest. Simple interest is a notion that is employed across a wide range of industries, including banking, finance, automobiles, and more.

Let the original sum of money be P.

According to the question, if P is deposited at a simple interest rate of r% p.a. for t years, it will be doubled. This means that the interest earned on P after t years is P, i.e.,

I = P

The formula for simple interest is I = (P * r * t) / 100. Substituting I = P, we get:

P = (P * r * t) / 100

Simplifying, we get:

r = 100 / t

Now, the question states that if the same amount of money (P) is increased by 25% in t/2 years time, the new amount becomes:

P' = P + (0.25P) = 1.25P

Let the new rate of interest be r'.

The formula for simple interest is I' = (P' * r' * t/2) / 100. Substituting P' = 1.25P, we get:

I' = (1.25P * r' * t/2) / 100

The interest earned on P' after t/2 years is 1.25P - P = 0.25P. Therefore, we have:

I' = 0.25P

Substituting the value of I' in the above equation, we get:

0.25P = (1.25P * r' * t/2) / 100

Simplifying, we get:

r' = 20 / t

The percentage change in the interest rate is given by:

((r' - r) / r) * 100%

Substituting the values of r and r', we get:

((20/t - 100/t) / (100/t)) * 100%

= -80%

Therefore, the percentage change in the interest rate is -80%. This means that the interest rate needs to be reduced by 80% to achieve an increase in the amount of money by 25% in t/2 years time.

Learn more about simple interest on:

https://brainly.com/question/1173061

#SPJ9

The value of the missing angle x is 114 degrees

From the question, we have the following parameters that can be used in our computation:

The kite

The value of x can be calculated using the following equation

x + 78 + 78 + 90 = 360 ---- sum of angles in a quadrilateral

When the like terms are evaluated, we have

x + 246 = 360

So, we have

x = 114

Hence, the value of x is 114 degrees

Read more about angles at

https://brainly.com/question/28293784

#SPJ1

We can use the Taylor series formula to find the fourth-degree Taylor polynomial for f about x = 2.  The answer is d. 18

[tex]f(2) = f(2) = 405[/tex]

[tex]f'(2) = 29[/tex]

[tex]f''(2) = 28[/tex]

[tex]f'''(2) = 168[/tex]

The fourth-degree Taylor polynomial is:

P4(x) [tex]= f(2) + f'(2)(x-2) + (f''(2)/2!)(x-2)^2 + (f'''(2)/3!)(x-2)^3 + (f''''(c)/4!)(x-2)x^{2}[/tex]^4

where c is some number between 2 and x.

Using the given third derivative, we can find the fourth derivative:

[tex]f''''(x) = (4x + 1) ^6 * 4[/tex]

Plugging in x = c, we have:[tex]f''''(c) = (4c + 1) ^6 * 4[/tex]

Therefore, the coefficient of [tex](x-2)^4[/tex] in the fourth-degree Taylor polynomial is:[tex](f''''(c)/4!) = [(4c + 1) ^6 * 4] / 24[/tex]

We need to evaluate this at c = 2:[tex][(4c + 1) ^6 * 4] / 24 = [(4*2 + 1) ^6 * 4] / 24 = 18[/tex]

To learn more about Taylor polynomial, visit here

https://brainly.com/question/31419648

#SPJ4

Answer:

36.9 degrees

Step-by-step explanation:

Cos(x) = adjacent/hypoteneuse

cos(x) = 12/15

cos(x) = 4/5

x = cos^-1(4/5)

= 36.869898 degrees

= 36.9 degrees

Hope this helps and be sure to mark this as brainliest! :)

Answer:

y= 0 , 2 , 4

Step-by-step explanation:

y=x+2

substitute the value for x

y=-2+2

y=0

y=0+2

y=2

y=2+2

y=4

The element at the memory location that is 1 integer behind the memory location pointed to by p2.

(a) *(a1+4) - This expression evaluates to 5. It is equivalent to a1[4].

(b) a1[3] - This expression evaluates to 6, which is the value of the element at index 3 in the array a1.

(c) *p1 - This expression evaluates to 6, which is the value of the element at the memory location pointed to by p1.

(d) *(p1+5) - This expression evaluates to 1, which is the value of the element at the memory location that is 5 integers ahead of the memory location pointed to by p1.

(e) p1[-2] - This expression evaluates to 7, which is the value of the element at the memory location that is 2 integers behind the memory location pointed to by p1.

(f) *(a1+2) - This expression evaluates to 7, which is the value of the element at index 2 in the array a1.

(g) a1[6] - This expression evaluates to 3, which is the value of the element at index 6 in the array a1.

(h) *p2 - This expression evaluates to 7, which is the value of the element at the memory location pointed to by p2.

(i) *(p2+3) - This expression evaluates to 5, which is the value of the element at the memory location that is 3 integers ahead of the memory location pointed to by p2.

(j) p2[-1] - This expression evaluates to 8, which is the value of the element at the memory location that is 1 integer behind the memory location pointed to by p2.

To learn more about expression visit:

https://brainly.com/question/14083225

#SPJ11

The line passes through the point (4, 5), has its equation of the line to be y = 5/4x

From the question, we have the following parameters that can be used in our computation:

Point, (x, y) = (4, 5)

The equation of a straight line is represented as

y = mx + c

Assuming c = 0,

So, we have

y = mx

This means taht

5 = 4m

So, we have

m = 5/4

Recall that

y = mx

So, we have

y = 5/4x

Hence, the equation of the line is y = 5/4x

Read more about linear relation at

https://brainly.com/question/30318449

#SPJ1

The given differential equation, y'(t) = 4y e, is separable. and Option A. The solution to the initial value problem is y(t) = e^(4e) is the right answer for the given question.

To determine if the equation is separable, we need to check if we can write the equation in form f(y)dy = g(t)dt. If we rearrange the equation, we get y'(t) = 4y(t)e.

We can write this as y'(t)/y(t) = 4e. Now we can see that we have separated the variables y and t on either side of the equation, so the equation is separable.

To solve the equation, we can integrate both sides with respect to t and y. On the left side, we get ln|y(t)|, and on the right side, we get 4et + C, where C is the constant of integration. Therefore, we have ln|y(t)| = 4et + C.

To find the value of C, we use the initial condition y(0) = 1. Substituting t = 0 and y(t) = 1 into the equation, we get,
ln|1| = 4e(0) + C, so C = ln|1| = 0.

Therefore, Option A. The equation is seperable. The solution to the initial value problem is y(t)=e^4e is the correct answer.

Learn more about integration:

https://brainly.com/question/22008756

#SPJ11

a. Numerical form of f(3): When x=3, the denominator of the function becomes 3-3=0, which makes the function undefined. Therefore, f(3) does not exist. This is known as a "point of discontinuity."

b. Graph of f(x): To plot the graph of f, we need to find the values of f(x) for different values of x. We can use algebraic techniques to simplify the function:

f(x) = (4x^2-17x+15)/(x-3)

= (4x-3)(x-5)/(x-3) (factoring the numerator)

= 4x - 3 (canceling out the common factor of (x-3))

Now, we can see that the function is undefined at x=3, but for all other values of x, it is equal to 4x-3. Therefore, the graph of f(x) is a straight line with slope 4 and y-intercept -3, except for a hole at x=3. To sketch the graph, we can draw a dotted line at x=3 to indicate the point of discontinuity, and draw the straight line with a break at x=3,

c. Limit of f(x) as x approaches 3:

As x approaches 3, the denominator of the function gets closer and closer to zero, but the numerator also approaches a specific value. We can use algebraic techniques to evaluate the limit:

lim x→3 (4x^2-17x+15)/(x-3)

= lim x→3 [(4x-3)(x-5)/(x-3)] (factoring the numerator)

= lim x→3 (4x-3) (canceling out the common factor of (x-3))

= 7

Therefore, the limit of f(x) as x approaches 3 is 7.

Learn more about functions on;

https://brainly.com/question/11624077

#SPJ1

c) The interest due on January 11th is $66 and the balance of the loan after the January 11th payment is $4,263.

d) The final payment that Peter must make on the due date (interest and principal) is $4,285.

The interest due, balances, and final payments are based on compound interest.

The compound interest system charges interest on both the accumulated interest and principal (balance).

April 15th to October 12th = 180 days

October 13th to January 11th = 90 days

January 12th to February 28th = 47 days

Total number of days for the loan = 317 days

Days in the year = 365 days

Principal = $10,000

Loan period = 317 days

Interest rate = 4%

Balance on October 12th = $10,197 ($10,000 + $10,000 x 4% x 180/365)

Payment on October 12th = $3,500

Balance from October 13th = $6,697 ($10,197 - $3,500)

Balance on January 11th = $6,763 ($6,697 + $66)

Interest = $66 ($6,697 x 4% x 90/365)

Payment on January 11th = $2,500

Balance from January 12th = $4,263 ($6,763 - $2,500)

Final Payment on February 28th = $4,285 ($4,263 + $4,263 x 4% x 47/365)

Learn more about compound interest at https://brainly.com/question/28020457.

#SPJ1

The length of the curve r = 4θ², 0≤θ≤2√3, is 38.786 units.

To find the length of the curve, we can use the formula for arc length:
[tex]L = \int_{a}^{b}\sqrt{(1 + (dy/dx)^2)} dx[/tex]

In this case, we have the polar equation r = 4θ², which we can convert to Cartesian coordinates using x = r cos(θ) and y = r sin(θ):

x = 4θ² cos(θ)
y = 4θ² sin(θ)

To find dy/dx, we can use the chain rule:

dy/dx = (dy/dθ)/(dx/dθ)

= (4θ² cos(θ) + 8θ sin(θ))/(8θ cos(θ) - 4θ² sin(θ))

Simplifying this expression, we get:

dy/dx =(4θ) (θ cos(θ) + 2 sin(θ))/(2 cos(θ) - θ sin(θ))

Now we can substitute this expression and the expression for x into the arc length formula:
[tex]L = \int_{0}^{2\sqrt{3}}\sqrt{(1 + ((4\theta)(\theta cos(\theta) + 2sin(\theta))/(2cos(\theta) - \theta sin(\theta)))^2)} d\theta[/tex]

This integral is difficult to solve analytically, so we can use numerical methods to approximate the value. Using a calculator or computer program, we get:

L ≈ 38.786

So the length of the curve is approximately 38.786 units.

Learn more about length:

https://brainly.com/question/24487155

#SPJ11

The value of x in each case:

(a) x = 7 units

(b) x = 5√2 units

(c) x = 4√3 units

In this question we use some basic formula of trigonometry.

(a) Consider sine of angle 30 degrees

sin(30) = opposite side/hypotenuse

1/2 = x/14

x = 14/2

x = 7 units

(b) Consider cosine of angle 45 dgrees

cos(45) = adjacent side/ hypotenuse

1/√2 = 5/x

x = 5√2 units

(c) Consider tangent of angle 60 degrees.

tan(60) = opposite side/ hypotenuse

√3 = x/4

x = 4 × √3

x = 4√3 units

Learn more about the trigonometry here:

https://brainly.com/question/17081568

#SPJ1