A long solenoid with n turns per meter and a radius R has a current that is changing in time a given by dil dt. Which expression gives the induced electric field inside the solenoid as a function of the distance from its axis, r < R?E = -μ0nr/2 di/dtE = -μ0nR^2/2r di/dtE = -μ0nR/2 di/dtE = -μ0nπr^2 di/dtE = 0

The equilibrium constant (Kw) of water at 10°C is 5.4×10^(-14) mol^2/L^2.

At 25°C, the commonly used value for Kw is 1.0×10^(-14) mol^2/L^2, which represents the equilibrium constant for the autoionization of water, where water molecules dissociate into hydronium ions (H3O+) and hydroxide ions (OH-).

Kw is defined as Kw = [H3O+][OH-], where [H3O+] and [OH-] are the concentrations of hydronium and hydroxide ions in mol/L, respectively. However, at lower temperatures, the concentration of hydronium ions decreases due to the lower ionization rate of water.

In this case, the given concentration of hydronium ions at 10°C is 5.4×10^(-8) mol/L, so Kw can be calculated as

Kw = [H3O+][OH-] = (5.4×10^(-8))(5.4×10^(-8)) = 2.916×10^(-15) mol^2/L^2, which is the equilibrium constant for water at 10°C.

For more questions like Equilibrium click the link below:

https://brainly.com/question/31027606

#SPJ11

The maximum possible efficiency for prototype A is 75.52%, the maximum possible efficiency for prototype B is 92.58% and the maximum possible efficiency for the prototype is 87.64%.

To find the maximum possible efficiency of each heat engine prototype, we can use the Carnot efficiency formula, which is given by:

η = 1 - (Tc / TH)

Where η is the efficiency, Tc is the temperature of the low-temperature reservoir, and TH is the temperature of the high-temperature reservoir.

a. For Prototype A:

Tc = 47°C

TH = 192°C

Using the Carnot efficiency formula:

η = 1 - (Tc / TH)

η = 1 - (47 / 192)

η ≈ 0.7552

The maximum possible efficiency for Prototype A is approximately 75.52%.

b. For Prototype B:

Tc = 17°C

TH = 227°C

Using the Carnot efficiency formula:

η = 1 - (Tc / TH)

η = 1 - (17 / 227)

η ≈ 0.9258

The maximum possible efficiency for Prototype B is approximately 92.58%.

c. For Prototype C:

Tc = -33°C

TH = 267°C

Using the Carnot efficiency formula:

η = 1 - (Tc / TH)

η = 1 - (-33 / 267)

η ≈ 0.8764

The maximum possible efficiency for Prototype C is approximately 87.64%.

Please note that these calculations assume ideal conditions and do not take into account any practical limitations or inefficiencies that may exist in the prototypes.

The maximum possible efficiency for Prototype A is approximately 75.52%. The maximum possible efficiency for Prototype B is approximately 92.58%.The maximum possible efficiency for Prototype C is approximately 87.64%.

To practice more questions about the Carnot engine:

https://brainly.com/question/17200911

#SPJ12

Only when 2 = 2W/I is the effort necessary to accelerate a rod to a given angular speed equal to its kinetic energy. If not, it is equal to or higher than its kinetic energy at that moment.

It is a numerical illustration of how angular velocity changes over time.A pseudoscalar, angular acceleration, exists. If the angular speed rises anticlockwise, the sign of angular acceleration is regarded to be positive; if it grows clockwise, it is taken to be negative.

The work required to accelerate the rod from rest to a given angular speed is given by:

W = (1/2)Iω²

where I denotes the rod's moment of inertia and denotes the angular speed.The kinetic energy of the rod at time t is given by:

K = (1/2)Iω²

where again I is the moment of inertia and ω is the angular speed at time t.

Since the expressions for the work and kinetic energy have the same form, we can see that they are equal when the angular speed is such that:

ω² = 2W/I

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

The speed ratio va/vb would be 4. Thus, the answer is option a.

The kinetic energy of a moving object is directly proportional to its mass and the square of its speed

In this scenario, ball a has half the mass of ball b but eight times its kinetic energy.

This means that the speed of ball a is greater than that of ball b. To find the speed ratio, we can use the formula for kinetic energy:

KE = (1/2)mv^2.

If we assume the velocity of ball b to be v, then the velocity of ball a would be sqrt((8/0.5)v^2) = 4v.

Learn more about kinetic energy at

https://brainly.com/question/26472013

#SPJ11

The magnitude of the electric field at the origin produced by a semi-circular arc of charge (3.6 μC) is 4 times the electric field produced by the quarter-circle arc.

To find the electric field at the origin produced by the semi-circular arc of charge, we first consider the electric field produced by a quarter-circle arc. If we know the electric field produced by the quarter-circle arc, we can multiply it by 4 to find the electric field produced by the semi-circular arc since it has twice the charge and twice the length.

1. Determine the charge of the quarter-circle arc (1.8 μC).
2. Calculate the electric field produced by the quarter-circle arc using the formula E = kQ/r², where E is the electric field, k is the electrostatic constant (8.99 x 10⁹ N m²/C²), Q is the charge (1.8 μC), and r is the distance from the charge to the origin.
3. Multiply the electric field of the quarter-circle arc by 4 to find the electric field of the semi-circular arc.

Following these steps will give you the magnitude of the electric field at the origin produced by the semi-circular arc of charge.

To know more about  electric field  click on below link:

https://brainly.com/question/15800304#

#SPJ11

I. System: Woman + barbell + Earth For the system consisting of the woman, the barbell, and the Earth, the terms on the left side of the energy equation (the deltaEsys side) are: deltaEwoman, -Fh, and (1/2)mv2.

An equation is a mathematical statement that expresses the equality of two expressions. It consists of two expressions separated by an equal sign (=). Equations are used to solve a wide range of mathematical problems, from basic arithmetic to complex calculus. Equations can be written using numbers, variables, and various mathematical operations such as addition, subtraction, multiplication, division, and exponentiation.

On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

II. System: barbell only For the system consisting of the barbell only, the terms on the left side of the energy equation (the deltaEsys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

III. System: barbell + Earth For the system consisting of the barbell and the Earth, the terms on the left side of the energy equation (the Esys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

To learn more about equation

https://brainly.com/question/25699025

#SPJ1

If a process is spontaneous in the forward direction at constant temperature and pressure, then the sign of ΔG is negative. This indicates that the process is exergonic and releases energy.

Conversely, if a process is spontaneous in the reverse direction, then the sign of ΔG is positive, indicating that the process is endergonic and requires energy input.

This is because the criterion for spontaneity at constant temperature and pressure is that the total entropy of the universe increases, or ΔS_univ > 0. T

he change in free energy is related to the change in entropy and enthalpy by the equation:ΔG = ΔH - TΔSwhere ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.

If the process is spontaneous in the forward direction, then ΔS is positive (since the entropy of the system increases) and ΔH is negative (since the system releases heat).

Therefore, ΔG is negative:ΔG = ΔH - TΔS < 0

So, if a process is spontaneous in the forward direction, the sign of ΔG is negative.

For more questions on temperature and pressure - https://brainly.com/question/29321317

#SPJ11

The force on Q1 due to Q2 is attractive and directed in the +x direction. The correct option is a). To determine the correct answer, we'll use Coulomb's Law which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

The charges are Q1 = -0.10 μC (located at the origin) and Q2 = +10 μC (located on the positive x-axis at x = 1.0m).

Since Q1 is negative and Q2 is positive, the force between them will be attractive. This is because opposite charges attract each other. The attractive force on Q1 will be directed towards Q2, which is in the positive x direction.

Therefore, it is attractive and directed in the +x direction.

To know more about Coulomb's Law refer here:

https://brainly.com/question/506926#

#SPJ11

The object needs to be placed 14.5 cm in front of the mirror to form a virtual image with a height of 10.6 cm.

[tex]1/f = 1/d_o + 1/d_i[/tex]

m =[tex]-h_i/h_o[/tex] = -10.6/3.5 = -3.03

m = [tex]-d_i/d_o[/tex]

-3.03 = -d[tex]_i/10.5[/tex]

[tex]d_i =[/tex] 31.8 cm

[tex]1/f = 1/10.5 + 1/31.8[/tex]

f = -33.8 cm

[tex]1/f = 2/R[/tex]

So we can solve for R:

[tex]1/-33.8 = 2/R[/tex]

R = -67.6 cm

The radius of curvature of the mirror is -67.6 cm.

[tex]m = h_i/h_o = 10.6/h_o[/tex]

[tex]10.6/h_o = 10.6/3.5[/tex]

[tex]h_o = 3.5 cm[/tex]

Now we can use the mirror equation again to find the image distance:

[tex]1/f = 1/d_o + 1/d_i[/tex]

Since the image is virtual, d_i is negative:

[tex]1/-33.8 = 1/10.5 + 1/d_i[/tex]

[tex]d_i = -14.5 cm[/tex]

A mirror is a surface that reflects light, sound, or other waves. Mirrors can be made of various materials such as glass, metal, or plastic, and can have different shapes and curvatures to achieve specific optical properties. When light waves hit a mirror, they bounce off at an angle that is equal to the angle of incidence, according to the law of reflection.

This allows us to see our reflection in a mirror, as well as to use mirrors in various applications such as telescopes, microscopes, and lasers. Mirrors can also be used to create optical illusions, such as in a funhouse mirror or in a kaleidoscope. In addition, mirrors play a crucial role in certain scientific experiments, such as those involving lasers or in the study of light and optics.

To learn more about Mirror visit here:

brainly.com/question/3795433

#SPJ4

A) The impedance of the air conditioner is approximately Z= 17.1 Ω.
B) The rms current is approximately 11.7 A.
C) The average power consumed by the air conditioner is approximately Pav= 820.14 W.

A) To find the impedance (Z) of the air conditioner, we can use the formula Z = √(R² + X_L²), where R is the resistance and X_L is the inductive reactance.
Z = √(6.0 Ω² + 16 Ω²) = √(36 + 256) = √292 ≈ 17.1 Ω

B) To find the rms current (I_rms), we can use the formula I_rms = V_rms / Z, where V_rms is the rms voltage.
I_rms = 200 V / 17.1 Ω ≈ 11.7 A

C) To find the average power (P_av) consumed by the air conditioner, we can use the formula P_av = I_rms² × R.
P_av = (11.7 A)² × 6.0 Ω ≈ 820.14 W

For more such questions on Impedance.

https://brainly.com/question/17137756#

#SPJ11

Answer:

it reflects most of the light that falls on them

Explanation:

good luck

The voltage across the secondary coil is approximately 78.85 V. The current in the secondary coil when connected across a 140 Ω resistor is approximately 0.5632 A. We'll be using the terms primary windings, secondary windings, potential difference, voltage, current, and resistor.

A) To find the voltage across the secondary coil (V2), we can use the transformer equation:

V2 = (N2 / N1) * V1

where V1 is the voltage across the primary coil (28.5 V), N1 is the number of primary windings (300), and N2 is the number of secondary windings (830).

V2 = (830 / 300) * 28.5 V
V2 = 2.7667 * 28.5 V
V2 ≈ 78.85 V

B) To find the current in the secondary coil (I), we can use Ohm's law:

I = V2 / R

where V2 is the voltage across the secondary coil (78.85 V) and R is the resistance of the resistor (140 Ω).

I = 78.85 V / 140 Ω
I ≈ 0.5632 A

To know more about resistor refer here:

https://brainly.com/question/24297401#

#SPJ11

The correct answers are B and C for energy of a photon

h f divided by c and B. h c divided by lambda. These equations represent the relationship between the energy of a photon (E), its frequency (f), wavelength (lambda), and the Planck constant (h) and speed of light (c).
Hello! The energy of a photon can be calculated using the following formulas:

C. E = h × f, where E is the energy, h is Planck's constant, and f is the frequency of the photon.

B. E = (h × c) / λ, where E is energy, h is Planck's constant, c is speed of light, and λ (lambda) is the wavelength of the photon.

So, the correct answers are B and C.

Learn more about photon here:

https://brainly.com/question/29254702

#SPJ11

The following assertion is untrue: "The shorter the period of rotation tends to be, the farther the planet is from the Sun."

The inner planets are rocky, whereas the outer planets are gaseous, which can be attributed to the early solar system's temperature. The solar system's temperature increased as the gases came together to create a protosun. Temperatures in the inner solar system reached 2000 K, whilst, in the outer solar system, it was only 50 K.

Because of their compact, rocky surfaces akin to Earth's terra firma, the planets Mercury, Venus, Earth, and Mars are referred to as terrestrial. The four planets closest to the sun are the terrestrial planets.

to know more about solar systems here:

brainly.com/question/12075871

#SPJ1

A gas that obeys the equation of state Vm = RT/P + b - a/RT², does not have a critical point.

A critical point occurs when the first and second partial derivatives of the molar volume (Vm) with respect to pressure (P) are both equal to zero. This occurs at the critical temperature (Tc) and critical pressure (Pc).

Let's find the first and second partial derivatives of Vm with respect to P:

Vm(P, T) = RT/P + b - a/RT²

1) First partial derivative: ∂Vm/∂P
∂Vm/∂P = -RT/P²

2) Second partial derivative: ∂²Vm/∂P²
∂²Vm/∂P² = 2RT/P³

Now, we need to find the critical point where both partial derivatives are equal to zero:

1) -RT/P² = 0
2) 2RT/P³ = 0

Since both a and b are positive numerical constants, neither the first nor the second partial derivative will be equal to zero, as RT and P are always positive as well.

Therefore, for a gas that obeys the equation of state Vm = RT/P + b - a/RT², it does not have a critical point.

Learn more about critical point:

https://brainly.com/question/7805334

#SPJ11

The total complex power delivered to the load is S = (8367.08 - j470.97) kVA.

To find the total complex power delivered to the load, we can use the formula:

S = 3 * Van² * ZΔ / (3 * Zline + ZΔ)

where S is the complex power delivered to the load, Van is the line-to-neutral voltage, ZΔ is the load impedance in the delta configuration, and Zline is the impedance of each line.

Given:

Van = 208 ∠∠0° V

ZΔ = (51 + j45) Ω

Zline = (0.4 + j1.2) Ω

Substituting these values into the formula, we get:

S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / [3 * (0.4 + j1.2) Ω + (51 + j45) Ω]

Simplifying the expression in the denominator:

3 * (0.4 + j1.2) Ω + (51 + j45) Ω

= (1.2 + j3.6) Ω + (51 + j45) Ω

= 52.2 + j48.6 Ω

Substituting this back into the formula and simplifying, we get:

S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / (52.2 + j48.6 Ω)

= 8526.24 ∠∠-3.164° VA

= (8526.24 cos(-3.164°) + j8526.24 sin(-3.164°)) kVA

= (8367.08 - j470.97) kVA

learn more about Voltage here:

https://brainly.com/question/29910116

#SPJ11

Part a) the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m. Part b) the distance from the point charge where the electric potential is 25.0 V is 9.00 x 10⁻³ m.


The electric potential (V) at a certain distance (d) from a point charge (q) can be calculated using the formula:
V = k x q/d
where k is Coulomb's constant (k = 9.0 x 10⁹ N*m₂/C²).
Part A:
We know that the electric potential is 84.0 V and the charge of the point charge is 2.50 x 10^-11 C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
84.0 V = (9.0 x 10⁹ N x m/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm₂/C²) x (2.50 x 10⁻¹¹ C) / 84.0 V
d = 6.77 x 10⁻³ m
Therefore, the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m.

Part B:
We know that the electric potential is 25.0 V and the charge of the point charge is 2.50 x 10⁻¹¹ C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
25.0 V = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / 25.0 V
d = 9.00 x 10⁻³ m

Learn more about  electric potential here

https://brainly.com/question/12645463

#SPJ11

The number of electrons per second passing a given cross section of the wire is closest to is 2.4 × 10¹⁷, so option (b) is correct.

It derived the namesake Ampère's law from this finding, which connects the size of the force between two conductors to the length of the wires and the current's strength. It designated the energy charge flow as "intensity courant," which is French for "current intensity," and assigned it the letter "I."

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature) according to the energy.

Therefore, The number of electrons per second passing a given cross section of the wire is closest to is 2.4 × 10¹⁷, so option (b) is correct.

To know more about energy check the below link:

https://brainly.com/question/28109294

#SPJ1

The equilibrium configuration at which the torque vanishes is θ=π/2, and deviations from equilibrium can be parameterized as θ=π/2−ϵ using power series expansions.

The term "equilibrium configuration" refers to the state of a physical system in which the net force and net torque acting on the system are both zero, and the system is not undergoing any acceleration or rotation.

A power series expansion is a mathematical technique used to express a function as an infinite sum of terms, where each term is a power of a variable multiplied by a coefficient. Power series expansions are often used in calculus and mathematical analysis to approximate functions and solve differential equations.

Learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ1

The time it takes to fully charge an electric vehicle battery with 60 kWh of energy at home depends on the charging speed and the power source. With a residential voltage of 120v and a current of 20a, the charging power is 2.4 kW.

To calculate the charging time, we divide the battery's energy capacity (60 kWh) by the charging power (2.4 kW), which gives us a charging time of 25 hours.

However, most electric vehicle owners install a higher voltage charging station, which reduces the charging time significantly. For example, a Level 2 charging station with 240v and 30a can charge the same battery in about 10 hours.

Additionally, some electric vehicles have fast charging capabilities that can charge the battery up to 80% in as little as 30 minutes. It is essential to understand the charging speed and the charging infrastructure available to make informed decisions about charging your electric vehicle.

To know more about electric vehicle battery refer here:

https://brainly.com/question/13806305#

#SPJ11

a) The resonance angular frequency of the circuit is 250 rad/s. b) The resistance R of the resistor at resonance frequency is 200 ohms. c) At the resonance frequency, the peak voltages across the inductor, capacitor, and resistor are 60 V, 60 V, and 240 V respectively.

a) The resonance angular frequency of a series R-L-C circuit can be calculated using the formula: ω = 1/√(LC), where L is the inductance in Henries and C is the capacitance in farads. Given that L = 0.200 H and C = 80.0 microfarads (or 80.0 x 10^(-6) F), we can substitute these values into the formula to get: ω = 1/√(0.200 x 80.0 x 10^(-6)) = 250 rad/s.

b) At the resonance frequency, the impedance of the inductor and capacitor cancel each other out, resulting in a purely resistive circuit. The current amplitude in the circuit is given as 0.600 A. Using Ohm's law, we can calculate the resistance R of the resistor as R = V/I, where V is the voltage amplitude of the source (240 V) and I is the current amplitude (0.600 A). Thus, R = 240 V / 0.600 A = 200 ohms.

c) At the resonance frequency, the voltage across the inductor (Vl) and capacitor (Vc) are equal and given by the formula: Vl = Vc = IωL = IωC, where I is the current amplitude, ω is the angular frequency, L is the inductance, and C is the capacitance. Using the values given, we can calculate Vl and Vc as 60 V each. The voltage across the resistor (Vr) is the same as the voltage amplitude of the source, which is 240 V. Thus, Vl, Vc, and Vr are 60 V, 60 V, and 240 V respectively.

Learn more about R-L-C circuit here:

https://brainly.com/question/13003370

#SPJ11

Crosstalk occurs in unshielded twisted-pair copper wire networks when the electrical signals in one pair of wires leak into the adjacent pair of wires. This is caused by the magnetic field generated around the adjacent pairs of wire.

Here, correct option is B.

This magnetic field can induce a current in the adjacent wires, thus transferring the signals from one pair of wires to the other. In addition, the electrical wave can be reflected back from the far end of the cable, causing interference in the adjacent pair of wires.

Finally, the collision caused by two nodes trying to use the media simultaneously can also lead to crosstalk. It is therefore important to ensure that the twisted pairs are not too close together and shielded appropriately to minimize crosstalk and ensure a reliable network.

Therefore, correct option is B.

Know more about magnetic field here

https://brainly.com/question/14848188#

#SPJ11

Rearranging the equation and solving for potential energy yields a result of 10 J when multiplied by the spring constant of 2520 N/m and the displacement of 5.11 cm, thus confirming that the overall length of the spring is 16.11 cm.

To solve this problem, Hooke's Law and Conservation of Energy were used. Hooke's Law states that the elongation of a spring is directly proportional to the force applied and inversely proportional to the spring constant.

k = F/x = (3.75 kg * 9.8 m/s2)/1.50 cm = 2520 N/m.

The Conservation of Energy states that the potential energy stored in a spring is equal to the work done to stretch it multiplied by the spring constant. Using the given data, the potential energy stored in the spring is equal to 10 J.

16.11 cm: 16.11 cm - 11.00 cm = 5.11 cm.

Rearranging the equation and solving for the potential energy gives 10 J = (2520 N/m) * 5.11 cm, which confirms that the total length of the spring is 16.11 cm.

Learn more about Hooke's Law at: https://brainly.com/question/15703348

#SPJ11

a. Fc = (m * v^2) / R

where m is the mass of the vehicle, v is the velocity of the vehicle, and R is the radius of the curve.

Plugging in the values, we get:

Fc = (1630 kg * (13.9 m/s)^2) / 385 m

Fc = 8206.73 N

Therefore, the centripetal force exerted on the vehicle is 8206.73 N.

b. The force that plays the role of the centripetal force in this case is the force of static friction.

*IG:whis.sama_ent

The peak voltage across the bulb is approximately 17V. The correct answer is A. 17V.

For the 12V, 50W halogen bulb in a desk lamp, you need to determine the peak voltage when the bulb's rating refers to the RMS voltage. The relationship between RMS voltage and peak voltage is:
RMS voltage = peak voltage / √2
To find the peak voltage, rearrange the equation:
peak voltage = rms voltage * √2
Given the RMS voltage is 12V:
peak voltage = 12V * √2 ≈ 12V * 1.414 ≈ 17V
So, the peak voltage across the bulb is approximately 17V. Your answer is A. 17V.

Learn more about RMS voltage here: https://brainly.com/question/18883096

#SPJ11

Hence, the Earth's magnetic field could potentially affect the results of the experiment measuring the mass of the electron, particularly if the experiment involves the use of charge particles or magnetic fields.

The earth's magnetic field can have an effect on experiments measuring the mass of electrons. This is because charged particles, like electrons, can be influenced by magnetic fields. When an electron is moving in a magnetic field, it will experience a force perpendicular to its velocity, causing it to move in a circular path. This means that the path of the electron can be altered by the magnetic field, leading to inaccurate measurements of its mass.

To mitigate this effect, scientists must ensure that the experimental apparatus is shielded from the earth's magnetic field as much as possible. This can involve using materials that do not conduct magnetic fields or placing the experiment in a location that is shielded from the effects of the earth's magnetic field. By reducing the impact of the earth's magnetic field on the experiment, scientists can obtain more accurate measurements of the mass of electrons.

In conclusion, the earth's magnetic field can have a significant impact on experiments measuring the mass of electrons. By taking steps to minimize this effect, scientists can obtain more accurate results and further our understanding of fundamental particles and their properties.

Know more about Earth's Magnetic Field here:

https://brainly.com/question/3036309

#SPJ11

A curve of radius 50.2 m is banked so that a car of mass 1.7 Mg traveling with uniform speed 53 km/hr can round the curve without relying on friction to keep it from slipping on the surface.  The angle at which the curve is banked is approximately 21.2 degrees.

To explain, we can use the formula for the angle of banking:

[tex]θ = tan⁻¹(v² / (r * g))[/tex]

Where v is the velocity of the car, r is the radius of the curve, and g is the acceleration due to gravity. Plugging in the values given, we get:

[tex]θ = tan⁻¹((53 km/hr)² / (50.2 m * 9.8 m/s²))[/tex]

Converting the velocity to meters per second and simplifying, we get:

[tex]θ ≈ 21.2[/tex] degrees

Therefore, the angle at which the curve must be banked is approximately 21.2 degrees. This angle allows the horizontal component of the car's mass to balance the necessary centripetal force needed to round the curve without relying on friction.\

learn more about mass here:

https://brainly.com/question/15959704

#SPJ11

When a circuit is made, electricity is able to flow from the power source, through the circuit, and back to the power source. This creates a complete loop, and electricity is able to be used.

When the circuit is disconnected, the loop is broken and electricity cannot flow. This is because there is no path to complete the circuit. No electricity is able to flow, and the device connected to the circuit will not work.

In some cases, the lack of a complete circuit can cause a short circuit and potentially damage the device. In order to make sure a circuit is complete, all of the wiring must be connected properly and securely. If a wire is loose or broken, the circuit will not be complete and the device will not work.

Know more about circuit here

https://brainly.com/question/27206933#

#SPJ11

At  1.29 T/s rate must the magnitude of B change in order to induce a current of 0.392 A in the windings of the coil.

Using Faraday's Law, we can relate the induced EMF (voltage) to the rate of change of magnetic flux through the coil:

[tex]EMF = -N(dΦ/dt)[/tex]

where N is the number of turns in the coil, and Φ is the magnetic flux through the coil. The negative sign indicates that the induced EMF opposes the change in flux.

We can also relate the EMF to the current and resistance:

EMF = IR

Combining these equations, we can solve for the rate of change of magnetic flux:

[tex](dΦ/dt) = -EMF/N = (-IR)/N[/tex]

Plugging in the given values, we get:

[tex](dΦ/dt) = (-0.392 A x 12.7 Ω) / 147 = -0.0337 Wb/s[/tex]

Since the magnetic field is perpendicular to the plane of the coil, the magnetic flux through the coil is given by: [tex]Φ = BAN[/tex]

where A is the area of the coil (5 cm x 8 cm = 0.04 m^2). Solving for the rate of change of magnetic field:

[tex](dB/dt) = (dΦ/dt) / AN = (-0.0337 Wb/s) / (0.04 m^2 x 147) = -1.29 T/s[/tex]

Therefore, the magnitude of the magnetic field must decrease at a rate of 1.29 T/s in order to induce a current of 0.392 A in the coil.

learn more about magnitude here:

https://brainly.com/question/30881682

#SPJ11

To determine the absolute maximum shear stress in a beam with given loads P1 and P2, we need to consider several factors, such as the beam's cross-sectional area and the distribution of the loads. These are not given In this case, so we cant find exact absolute maximum shear stress developed

First, identify the critical points where the maximum shear stress is likely to occur, which are usually at the supports and points of load application. Next, find the internal shear force (V) at each of these critical points. This can be done using equilibrium equations or shear force diagrams.

Once you have the internal shear force values, the absolute maximum shear stress can be calculated using the following formula: τ_max = VQ/Ib

Where τ_max is the maximum shear stress, V is the internal shear force, Q is the first moment of area about the neutral axis, I is the moment of inertia of the beam's cross-section, and b is the width of the beam's cross-section at the location of interest.

Calculate the maximum shear stress at each critical point and compare the values. The highest value among them will be the absolute maximum shear stress developed in the beam.

Know more about shear stress here:

https://brainly.com/question/14418799

#SPJ11