A length of wire is connected to a 9.0 V power pack and an ammeter. The reading on the ammeter is 0.25 A.
Calculate the resistance of the wire. Give the unit.

As soon as something is liberated from rest, it enters free fall. AND An orbiting satellite is subject to the gravitational pull of a planet.

Rising and falling ocean tides are a result of the moon's gravitational pull. Strong movement or a natural propensity toward something or someone, whether or whether it is related: A lot of research has been done on their gravitational pull toward harmful conduct.

Any two mass-bearing objects are drawn together by the gravitational pull. Since the gravitational force never attempts to push masses away, it is said to as attractive since it constantly seeks to draw masses together.

To know more about Gravitational visit:

https://brainly.com/question/3009841

#SPJ4

Change in friction force and acceleration is the most likely changes to cause the car to skid off the track when the coefficient of static friction between the tires and track is 0.90.

Between the two surfaces which are sliding or attempting to slide over one another, there is a force named friction. For instance, friction makes it challenging to push a book down the floor. Friction always moves an object in the direction that is counter to the direction that it is traveling or attempting to move.

To know more about friction visit

brainly.com/question/3415964

#SPJ4

Answer:

The weight of an object is a measure of the force of gravity on the object. It is calculated by multiplying the mass of the object by the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 meters per second squared (m/s^2).

Therefore, to calculate the weight of the Mars rover Spirit on Earth, we can use the formula:

weight = mass * acceleration due to gravity

In this case, the mass of the Mars rover is 836 kg, and the acceleration due to gravity on Earth is 9.8 m/s^2. Plugging these values into the formula, we get:

weight = 836 kg * 9.8 m/s^2

This simplifies to:

weight = 8194.8 kg*m/s^2

The weight of the Mars rover Spirit on Earth is approximately 8195 kg*m/s^2.

the sum of the energy stored in these two capacitors (cl and c2) is given by the formula ((q2)/2) *((1/c1)+(1/c2))

A capacitor is a device used to store electrical energy that is composed of two conductors that also are spaced apart but close enough to touch. An easy illustration of a storage device is a parallel-plate capacitor.

The primary purpose of capacitors is really to store electrostatic power in an electric field and release it when the circuit needs it. To prevent a potentially dangerous circuit failure, they let the AC through but stop the flow of DC.

To know more about capacitors visit:

https://brainly.com/question/17176550

#SPJ4

The ratio of k is equal towards the temperature constant for such reaction constants at a certain temperature, and the values of the rate constants for the forward or reverse reactions are concentrations at that temperature.

A forward response is a reversible reaction wherein products are created from reactants so it moves from left to right. A reversible reaction that moves from right to left is referred to as a backward reaction since reactants are created from products.

In some oxidation processes, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D.

To know more about  reversible reaction visit:

https://brainly.com/question/16614705

#SPJ4

The values of the rate constants for the forward or reverse reactions are concentrations at that temperature, and the ratio of k is equal towards the temperature constant for such reaction constants.

Why is a reaction reversible?

A chemical reaction that is reversible occurs when the reactants generate products, which then combine to return the reactants to their original state.

When the rate of the forward reaction and the rate of the reverse reaction are equal, equilibrium is reached. At equilibrium, the concentrations of all the reactants and products are fixed. The amount of reactant to product in a chemical reaction can be compared to derive the equilibrium constant, which is used to predict chemical behavior. The rate constants are fixed at some temperature.

To learn more about equilibrium constant use link below:

https://brainly.com/question/19340344

#SPJ4

Kinetic energy gained by the falling ball is equal to the change of potential energy is because mechanical energy remains conserved ,it only converts from one form to another form.

The mechanical energy stays rationed when just inner powers follow up on the body and no outside powers are in real life. It implies that motor and potential might continue to change all through the excursion. Be that as it may, their total is steady at each point.

The forces are moderate, i.e., they don't rely upon the way of the moving article and are just subject to the beginning and last position. For instance, the gravitational power is moderate in nature, though the opposition presented via air is non-moderate in nature as it relies upon the way.

From the diagram,we can see that object has potential energy =mgh because of height h.When it was dropped from height h potential energy starts decreasing and kinetic energy starts increasing because of velocity attained by the body.Since mechanical energy is conserved,therefore kinetic and potential energy is equal.

To know more about potential energy, visit here:

https://brainly.com/question/9349250

#SPJ4

Because one mole of H X 2 is typically lighter than N e, it stands to reason that it would have a higher entropy than N e. Ne, on the other hand, is thought to have a higher entropy due to its lower molar mass.

A chemical equation can be examined for changes in physical states and the number of moles of product and reactant particles to predict relative changes in entropy using the same factors on a macroscopic level.

The species with the greater molar mass between two monoatomic ones will have a greater standard entropy. The more mobile of two allotropic forms of an element will have a higher standard entropy value. The entropies of these substances are not zero, despite the fact that their conventional internal energies and enthalpies would be. The "energies of formation" of elements in their normal states are typically set to zero because there is no absolute scale of energy.

Entropy, on the other hand, gauges the distribution of energy among the numerous quantum states that can accept it; they exist even in pure substances.

Evidently, entropies often rise with molecule weight. This is, of course, a direct reflection of the fact that translational quantum states are more densely packed in heavier molecules, making them more occupiable, for the noble gases.

The additional impacts of rotational quantum levels are visible in the entropies of the diatomic and polyatomic molecules.

To know more about entropy

https://brainly.com/question/13146879

#SPJ4

While distributing gifts near the equator, Sneezy will be hanging on a rope with a comparable tension of 413.56 N.

String tension is T = mg at the poles.

where T= tension  (N or kg-m/s2)

9.8 m/s2 is the acceleration caused by gravity (g).

m=Tension ÷ gravity

= 415 ÷9.8 kilogram

= 42.34 kilogram

The value of g has now changed at the equator. Earth's rotation causes g to become g'

g' = g - (w^2)×R

w = angular velocity of earth = 7.29×10^-5

R = radius of earth = 6371000metre

Now, the tension

mg' = mg - mw^2 R

   =  415 − 42.34×6371000×7.29×10^-5×7.29×10^-5

  = T'= 415-(42.34×6371000×7.29(10^(-5)) ×7.29×(10^(-5)))

T' =413.56 N

Gravity: In physics, gravity—also known as gravitation—is the constant force of attraction that pulls all things together.

To know more about radius, visit this:

https://brainly.com/question/24051825

#SPJ1

Answer:

39.04 J

Explanation:

Definition of work

[tex]W=fd[/tex]

[tex]W=[/tex] Work

[tex]f=[/tex] force

[tex]d=[/tex] displacement

In this case,

[tex]f=6.4[/tex]

[tex]d=6.1[/tex]

[tex]W=6.4*6.1[/tex]

[tex]W=39.04[/tex]

For the chain: linear density =ρ, length =l. The chain is placed on a smooth plane. The speed of the chain when the left end leaves the plane is the same as its initial speed, which is zero.

Generally, To determine the speed of the chain when the left end leaves the plane, we need to consider the forces acting on the chain and use Newton's second law to find the acceleration of the chain.

The forces acting on the chain are the force of gravity and the normal force from the plane. The force of gravity is downward and is equal to the weight of the chain, which is given by the equation:

Fg = mg

where m is the mass of the chain and g is the acceleration due to gravity. The normal force from the plane is upward and is equal to the force of gravity, since the chain is stationary at this moment.

Newton's second law states that the acceleration of an object is equal to the net force acting on it divided by its mass. Therefore, the acceleration of the chain is given by:

a = (Fg - Fn)/m = (mg - mg)/m = 0 m/s^2

Since the acceleration of the chain is zero, the speed of the chain does not change as it drops.

Read more about speed

https://brainly.com/question/28224010

#SPJ1

CQ not found

Because mammals are warm blooded.

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

What is acceleration?

In mechanics, acceleration is the rate of change of an object's velocity with respect to time. Acceleration is a vector quantity (as long as it has magnitude and direction). The direction of an object's acceleration is given by the direction of the net force acting on that object.

For example, if a vehicle starts from rest (zero velocity in the inertial frame) and moves in a straight line while increasing speed, the vehicle accelerates in the direction of travel. When the vehicle turns, it experiences acceleration in a new direction and changes its motion vector. Acceleration in the vehicle's current direction of travel is called linear (or tangential, in the case of circular motion) acceleration, and the passenger perceives that response as pushing back into the seat.

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

To know more about acceleration visit:

https://brainly.com/question/460763

#SPJ4

At 0 °C, combine 200 grams of ice with 1000 grams of liquid. The following relational models overall final composition of a mixture at 6.7 °C:

Atoms from various elements are chemically mixed in a predetermined ratio to form a compound. When there is no biochemical combination or reaction, two or more chemicals are combined to form a mixture. Different elements are found in compounds in fixed ratios organised in predetermined ways by chemical bonds.

A mixture is a chemical that has a varied composition, indicating that it is made up of different sorts of molecules or atoms. These might have intermolecular bonds or bonds among molecules, but these are far weaker than the bonds created when elements combine to form compounds.

To know more about composition of the mixture visit:

https://brainly.com/question/26835405

#SPJ4

Answer:

The equation for the velocity component in the x-direction is : vx(t) = v(0) Cosθ.

Explanation:

here v(0) is the initial velocity

The total voltage in the circuit is 8 V. Then, the current passing through the resistor R3 is 1.95 A. The power supply to this resistor by the batteries is 15.6 W.

According to Ohm's law, the voltage through a closed circuit is the product of the current passing through the circuit and resistance through it.

Hence, V = I R.

Given that the resistance through the resistor R3 = 4.10 Ω

The voltage across each batteries = 4 V

Total voltages =  4 + 4 = 8V

Current = voltage/ resistance

             = 8 V/ 4.10 Ω

             = 1.95 A.

Power through a circuit is the product of current and voltage through it.

P = I V

Power supplied to R3 = 1.95 A × 8 V = 15.6 W.

Therefore, the power supplied by the batteries to the resistor R3  is 15.6 W.

To find more on Ohm's law, refer here:

https://brainly.com/question/1247379

#SPJ1

nB = 1.5290 for light having a 435.8 nm air wavelength. The difference, lA - lB, in their wavelengths inside the glass is 221.4nm.

The refractive index of a medium is defined as the speed of light in a vacuum (c) divided by the speed of light in the medium (v). This can be expressed mathematically as:

= n

= c / v

The wavelength of light in a medium is related to its frequency (f) and its speed in the medium (v) according to the following equation:

= lambda

= v / f

where lambda is the wavelength of the light in the medium.

We can use these equations to find the difference in the wavelengths of the two types of light inside the glass. Letting lA and lB represent the wavelengths of the light with wavelengths 656.3 nm and 435.8 nm inside the glass, respectively, we can set up the following equation:

for nA

= nA

= c / v

= c / (f x lA)

for nB

= nB

= c / v

= c / (f x lB)

Dividing the eq. we know:

=> nA / nB = (f x lB) / (f x lA)

= lB / lA

Inserting the known values for nA, nB, and lA, we get:

=> 1.5160 / 1.5290 = lB / 656.3 nm

Solving for lB, we find that lB = 434.9 nm.

The difference in the wavelengths inside the glass is then:

=> lA - lB = 656.3 nm - 434.9 nm

= 221.4 nm

Therefore, the difference in the wavelengths of the two types of light inside the glass is 221.4 nm.

To know more about wavelength please refer: https://brainly.com/question/27557868

#SPJ4

Answer:

let the first point be a second be b third be c fourth be d and last point be e.

The point a and d are incorrect. because tye plotting of the is incorrect

The range of a projectile is the horizontal distance the projectile travels from the time it is launched to the time it comes back down to the same height at which it is launched.

Answer:

Explanation:

The horizontal displacement of the projectile is called the range of the projectile. The range of the projectile depends on the object's initial velocity.

Mgsin, As a result, at a state of dynamic equilibrium, the frictional force exerted on a mass sliding down an incline is proportional to the object's weight times the sine of the incline angle.

In contrast to velocity, which describes the speed and direction of such an object's movement, speed is the speed of moves along a path. Alternatively, velocity is a vector while speed is a scalar quantity.

A motion or activity has velocity when it moves quickly. Another term for speed is celerity, which is also a synonym. The measurement of an object's rate and direction of positional change is known as its velocity in physics.

To know more about Velocity visit:

https://brainly.com/question/18084516

#SPJ4

The remote PIC should be aware of the wind gust because of a)  the rapid change in direction and speed which causes turbulence.

The wind gust is a sudden short-term increase in wind speed. According to US weather observation practice, a gust is reported when the maximum wind speed reaches at least 16 knots and the difference between the maximum wind speed and the light wind speed reaches at least 9 knots. Wind forces can disrupt a building's load path or pierce the building's skin. Doors and windows can burst in really high winds. In other cases, nearby debris can be caught in the wind and flung into the building's envelope.

Learn more about the wind gust in

https://brainly.com/question/459236

#SPJ4

The initial speed of the van of mass 2713 kg is 9.04 m/s.

Speed is the ratio of distance to time.

To calculate the initial speed of the van, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the initial speed of the van is 9.04 m/s.

Learn more about speed here: https://brainly.com/question/4931057

#SPJ1

All of the magnetic domains in an unmagnetized item, such as the original piece of metal in our experiment below, point in different directions.

When a metal gets magnetized, as when it is rubbed with a strong magnet, all like magnetic poles line up and point in the same direction. Atoms in ferromagnetic materials form formations known as domains. A domain is an internal region of a material in which groups of magnetic moments spontaneously align in the same direction. When the external field is withdrawn, the domain walls are pinned in their new orientation, and the aligned domains generate a magnetic field. This is what happens when a ferromagnetic material is "magnetized" and transformed into a permanent magnet.

Learn more about magnetic here-

https://brainly.com/question/3160109

#SPJ4

This argument is valid because the bar is a homogeneous linear conductor, and the magnetic field around it must be constant.

A magnetic field is a region of space in which a magnetic force is exerted on any magnet, electric current, or magnetic material. It is created by an electric current, such as the electric current in a wire. It is also created by the motion of electric charges, such as those found in an electromagnet. The strength of the magnetic field increases as the electric current increases. The direction of the magnetic field is determined by the direction of the electric current.

The field at any point along the bar is proportional to the current passing through it, which remains constant for a homogeneous conductor. Therefore, the field at any point along the bar must be the same as at the midpoint, just with a larger magnitude. This implies that the average effective magnetic field along the bar is five times larger than the field at the midpoint.

To know more about magnetic field click-

https://brainly.com/question/14411049

#SPJ4

(a) The normal force on the sled is 490 N.

( b ) The sleds acceleration in the horizontal direction is 0.52 m/s².

The normal force on the sled is the upward force on the sled due to weight of the sled acting downwards.

The normal force on the sled is calculated as follows;

N = mg

where;

N = 50 kg x 9.8 m/s²

N = 490 N

The acceleration of the sled is calculated by applying Newton's second law of motion as shown below;

Fx = ma

F cosθ = ma

a = Fcosθ / m

where;

a = ( 30 N x  cos30 ) / ( 50 )

a = 0.52 m/s²

Thus, the acceleration of the sled is a function of net force and mass of the sled.

Learn more about normal force here: https://brainly.com/question/28788588

#SPJ1

He explains two components of intelligence: the "g" factor (general ability) and the "s" factor (specific ability). The "g" factor of a person's general mental tasks, while the "s" factor is solely intellectual skills.

certain g and s abilities. According to Spearman's two-factor theory, intelligence is divided into two categories: general intelligence ("g") and specific ability ("s"). Spearman proposed that the "s" component was particular to a certain feature of intelligence to account for variations in performance on various tasks.

S component Individual factors, or empirically the tiniest subclusters of intercorrelations or common variance, are identified in several intelligence tests (specific). The most recent update was on September 30, 2022. Features of the "S" Factor: It is absorbed and learned from the surroundings. Within a single person, it varies from activity to activity. Each person has a different level of "S" ability.

to know more about intelligence here:

brainly.com/question/15020507

#SPJ1

The water purification procedure, such as filtration, sedimentation, distillation, etc.

Analysis of the reduction in microbes that is enough to protect against the transmission of pathogens in water is debated below. Chlorination is the most widely used method for disinfecting water supplies in the United States.

The most efficient way to desalinize salt water is by using a method called distillation. This is where you boil the water and then assemble the condensation. The steam will provide fresh salt-less water for you to drink.

So we can conclude that Chlorination is the activity of adding chlorine to drinking water to kill parasites bacteria and viruses.

Learn more about water here: https://brainly.com/question/1313076

#SPJ1

it take the ant   68.9 seconds to get across  the other edge of a long strip.

If the ant is moving at a constant speed, the velocity vector will have the same magnitude at any point, and can be decomposed in two vectors, along directions perpendicular each other.

So then, if we choose these directions coincident with the long edge of the paper, and the other perpendicular to it, the components of the velocity vector, along these axes, can be calculated as the projections of this vector along these axes.

We only are interested in the component of the velocity across the paper, that can be calculated as follows:

vₓ = v* sin θ, where v is the magnitude of the velocity, and θ the angle that forms v with the long edge.

We know that v= 0.6 cm/s, and θ = 40º, so we can find vₓ as follows:

vₓ = 0.6 cm/s x sin 40 º

Vx = 0.6 cm/s x 0.7451 =  0.447 cm/s

Applying the definition of average velocity, we can solve for t:

time =  30.8 cm/ 0.447

time = 68.9 seconds

Learn more about average velocity at:  https://brainly.com/question/17444459

#SPJ1

Answer:

Below

Explanation:

When the switch is closed the circuit is complete....the coil in the circuit will act as a solenoid magnet and draw the iron in thus raising the sign.

the refrigeration capability, in tons, is 4.905 tons, the coefficient of performance, in kW, is 4.17 KW, and the compressor power, in kW, is 4.1336 KW.

Electrical Expense = HP *.746 * hours * Kw cost * motor efficiency. As an illustration, consider a 50 HP compressor that consumes $.06 per Kwh of electricity and has a 90% efficiency electric motor. $5,172.26 is the yearly cost for 50 HP multiplied by.746 over 2,080 hours.

In order to create energy which can be kept in a tank for later use, air compressors work by applying pressure to atmospheric air. Similar to an open balloon, when the compressed air is purposefully released, pressure builds up, transforming the potential energy into productive kinetic energy.

To know more about compressor visit;

https://brainly.com/question/28963656

#SPJ4

The velocity of the acrobat immediately before grabbing the clown is three times as much mass is in the larger portion and than in the smaller piece, m2 due to air resistance  .

Air resistance is the name for the force that air produces. The force acts in the opposite direction when an object is flying through the air. A truck with a flat forward will experience significant air resistance in comparison to a sports car with a streamlined design.

Air resistance is a function of the object's speed, area, and shape as it moves through the atmosphere. Altitude, temperature, and humidity all have an impact on air resistance and density.

To know about air resistance visit :

brainly.com/question/19165683

#SPJ4