The distance apart of the bright interference fringes on the screen would be 1.45 mm.
The distance between the two slits (d) is given as 0.290 mm, and the wavelength of the laser beam (λ) is given as 632.2 nm. The distance between adjacent bright fringes (y) on the screen can be calculated using the formula y = (λD)/d, where D is the distance between the slits and the screen.
Substituting the given values, we get y = (632.2 nm x 5 m) / 0.290 mm = 10.92 mm.
However, the distance between the bright fringes is the distance between the centers of adjacent bright fringes, which is equal to twice the distance between adjacent bright fringes. Therefore, the distance apart of the bright interference fringes on the screen would be 1/2 of 10.92 mm, which is equal to 1.45 mm.
For more questions like Distance click the link below:
https://brainly.com/question/15172156
#SPJ11
What power lens is needed to correct for farsightedness where the uncorrected near point is 75 cm? C) -5.33 D B) -2.67 D D) 100 DE+2.67 D E) +2.67 D A) +5.33 D D) +1.00 D
The power lens needed to correct for farsightedness where the uncorrected near point is 75 cm is +2.67 D. So, option E) is the correct option.
To find the power lens needed to correct for farsightedness where the uncorrected near point is 75 cm, you should use the formula:
Power (in diopters) = 1 / distance (in meters)
First, convert the distance to meters:
75 cm = 0.75 meters
Next, calculate the power:
Power = 1 / 0.75 = 1.33 diopters
Since the person is farsighted, they need a converging lens, so the power should be positive.
Among the given options, the closest value to +1.33 D is E) +2.67 D. So, option E) is the correct option.
However, it's important to note that the exact power needed may vary depending on individual circumstances, and a more accurate value would be around +1.33 D.
Learn more about power:
https://brainly.com/question/11569624
#SPJ11
Calculate the moment of inertia of each of the following uniform objects about the axes indicated. A thin 2.50 kg rod lenght 75.0 cm about an axis perpendicular to it and passing a.)(i) through one end (ii) through its center, and (iii) about an axis parallel to the rod and passing through it. b.) A 3.00 kg sphere is (i) solid and (ii) A thin walled hollow shell c.) An 8.00 kg cylinder of lenght 19.5 cm cylinder if the cylinder is (i) thin-walled and hollow and (i) solid.
a) (i) 0.0781 kg*m², (ii) 0.3906 kg*m², (iii) 0.0521 kg*m²
b) (i) 0.4 kg*m², (ii) 1.2 kg*m²
c) (i) 0.125 kg*m², (ii) 0.25 kg*m²
a) (i) The moment of inertia of a thin rod of length L and mass M about an axis perpendicular to it and passing through one end is given by I = (1/3)*M*L². Substituting the given values, we get I = (1/3)*(2.50 kg)*(0.75 m)² = 0.0781 kg*m².
(ii) The moment of inertia of a thin rod of length L and mass M about an axis perpendicular to it and passing through its center is given by I = (1/12)*M*L². Substituting the given values, we get I = (1/12)*(2.50 kg)*(0.75 m)² = 0.3906 kg*m².
(iii) The moment of inertia of a thin rod of length L and mass M about an axis parallel to the rod and passing through it is given by I = (1/12)*M*L² + (1/4)*M*R², where R is the distance between the axis of rotation and the center of mass of the rod. For a thin rod, R = L/2. Substituting the given values, we get I = (1/12)*(2.50 kg)*(0.75 m)² + (1/4)*(2.50 kg)*(0.75 m/2)² = 0.0521 kg*m².
b) (i) The moment of inertia of a solid sphere of mass M and radius R about any axis passing through its center is given by I = (2/5)*M*R². Substituting the given values, we get I = (2/5)*(3.00 kg)*(0.5 m)² = 0.4 kg*m².
(ii) The moment of inertia of a thin-walled hollow sphere of mass M and radius R about any axis passing through its center is given by I = (2/3)*M*R². Substituting the given values, we get I = (2/3)*(3.00 kg)*(0.5 m)² = 1.2 kg*m².
c) (i) The moment of inertia of a thin-walled hollow cylinder of mass M, outer radius R and inner radius r about its central axis is given by I = (1/2)*M*(R² + r²). For a thin-walled cylinder, R ≈ r + L/2. Substituting the given values, we get I = (1/2)*(8.00 kg)*[(0.5*0.195 m + 0.5*0.19 m)² + (0.5*0.195 m)²] = 0.125 kg*m².
(ii) The moment of inertia of a solid cylinder of mass M, radius R and length L about its central axis is given by I = (1/12)*M*L² + (1/4)*M*R². For a cylinder, L ≈ R. Substituting the given values, we get I = (1/12)*(8.00 kg)*(0.195 m)² + (1/4)*(8.00 kg)*(0.195 m)² = 0
learn more about moment of inertia here:
https://brainly.com/question/29415485
#SPJ11
a tank contains 6,480 lbs of water at room temperature. how many hours would it take to empty the tank if a pump removes 2.7 gallons of water from the tank every minute.
The number of hours it would take to empty the tank if a pump removes 2.7 gallons of water from the tank every minute is approximately 4.8 hours.
First, we need to convert the weight of water in the tank (6,480 lbs) to volume (gallons) and then determine the time it takes for the pump to empty the tank.
1 gallon of water weighs approximately 8.34 lbs. So, to convert the weight of water to gallons, we can use the following formula:
Volume (gallons) = Weight (lbs) / 8.34 lbs/gallon
Volume = 6,480 lbs / 8.34 lbs/gallon = 776.74 gallons (approximately)
Now that we know the volume of water in the tank, we can determine the time it takes for the pump to empty it. The pump removes water at a rate of 2.7 gallons of water per minute. To find the time, we can use the following formula:
Time (minutes) = Volume (gallons) / Pump rate (gallons/minute)
Time = 776.74 gallons / 2.7 gallons/minute ≈ 287.68 minutes
To convert the time to hours, we can divide the minutes by 60:
Time (hours) = Time (minutes) / 60
Time ≈ 287.68 minutes / 60 ≈ 4.8 hours
So, it would take approximately 4.8 hours for the pump to empty the 6,480 lbs water tank at a rate of 2.7 gallons per minute.
Learn more about rate here: https://brainly.com/question/19493296
#SPJ11
a 5.8×10−2-t magnetic field passes through a circular ring of radius 5.3 cm at an angle of 16 ∘ with the normal.
Find the magnitude of the magnetic flux through the ring.
Express your answer using two significant figures.
The magnitude of the magnetic flux through the ring is approximately 4.9×10[tex]−4[/tex] Wb (we rounded the answer to two significant figures).
The magnetic flux through a circular loop is given by:
Φ = BAcosθ
Where Φ is the magnetic flux, B is the magnetic field, A is the area of the loop, and θ is the angle between the magnetic field and the normal to the loop.
In this case, the magnetic field is 5.8×10[tex]-2[/tex] T, the radius of the loop is 5.3 cm (or 0.053 m), and the angle between the magnetic field and the normal is 16∘.
The area of a circle is given by:
A = πr^2
So the area of the loop is:
A = π(0.053 m)[tex]^2[/tex] ≈ 8.83×10₃
Substituting the values into the equation for magnetic flux, we get:
Φ =[tex](5.8×10−2 T)(8.83×10−3 m^2)cos(16∘) ≈ 4.9×10−4 Wb[/tex]
Therefore, the magnitude of the magnetic flux through the ring is approximately 4.9×1[tex]0−4 Wb[/tex] (we rounded the answer to two significant figures).
learn more about magnetic flux here:
https://brainly.com/question/14411049
#SPJ4
Two different fluorescent probes are attached to separate sites on a protein: A ( λ ex =388 mm;λ em =475 mm) and B(λ er =483 nm;λ em =538 mm). The value of R0 is 64AThe following data are obtained. Fluorescence intensity of A in the absence of B: 160 units Fluorescence intensity of A in the presence of B:156 units At this efficiency, what is the distance between the probes? 117.86 A
64 A
0 A
34.75 A
˚
The distance between the probes is given as 117.86 A
How to solve for the distanceWe are given that the fluorescence intensity of probe A decreases from 160 units in the absence of probe B to 156 units in the presence of probe B. This decrease in intensity is due to the energy transfer from probe A to probe B. The efficiency of energy transfer can be calculated using the following equation:
E = 1 - (I_AB / I_A)
where I_AB is the fluorescence intensity of probe A in the presence of probe B and I_A is the fluorescence intensity of probe A in the absence of probe B.
Substituting the given values, we get:
E = 1 - (156 / 160) = 0.025
Now we can calculate the distance between the probes:
R = 64 A * [(1/0.025) - 1]^(1/6) = 117.86 A
Therefore, the distance between the probes is approximately 117.86 A.
Read more on distance here:https://brainly.com/question/26046491
#SPJ1
Watch this video to learn more about the descending motor pathway for the somatic nervous system. The autonomic connections are mentioned, which are covered in another chapter. From this brief video, only some of the descending motor pathway of the somatic nervous system is described. Which division of the pathway is described and which division is left out?
Without more specific information about the video you are referring to, I am unable to provide more detailed information about which division of the pathway is described and which division is left out. However, in general, the descending motor pathway for the somatic nervous system can be divided into two main divisions: the corticospinal tract and the extrapyramidal tract.
The somatic nervous system is the part of the peripheral nervous system that controls voluntary movements and sensory information from the body. It includes motor neurons that control skeletal muscles and sensory neurons that carry information from the skin, muscles, and joints to the central nervous system (brain and spinal cord). The somatic nervous system is responsible for conscious perception and response to external stimuli, such as touching a hot surface or moving your hand to pick up an object.
The corticospinal tract, also known as the pyramidal tract, originates in the motor cortex of the brain and travels through the brainstem and spinal cord to synapse with lower motor neurons in the anterior horn of the spinal cord. This tract is responsible for voluntary movements and fine motor control.
The extrapyramidal tract, on the other hand, originates in various parts of the brain, including the basal ganglia and cerebellum, and travels through the brainstem and spinal cord to synapse with lower motor neurons in the anterior horn of the spinal cord. This tract is responsible for involuntary movements, posture, and muscle tone.
Therefore, The corticospinal tract and the extrapyramidal tract are the two primary divisions of the descending motor pathway for the somatic nervous system.
To learn more about Extrapyramidal symptoms click:
https://brainly.com/question/27056764
#SPJ1
A particle moves 5m in the positive x direction while being acted upon by a constant force vec F = (4 N) cap i + (2 N) cap j ? (4N) cap k. The work done on the particle by this force is: A. 20 J B. 10 J C. -20 J D. 30 J E. Is impossible to calculate without knowing other forces
The work done on the particle by the force F is 20 J. Answer A is correct.
The work done on the particle by the force F can be calculated using the formula:
[tex]W = F \int ds[/tex]
where F is the force vector and ds is the displacement vector. Since the force is constant, we can simplify this to:
[tex]W = F . \int ds[/tex]
where [tex]\int ds[/tex] is the displacement vector. In this case, the particle moves 5m in the positive x direction, so we have:
[tex]\int ds = 5 \hat{i}[/tex]
Substituting this into the equation for work, we get:
W = F · 5 [tex]\hat{i}[/tex]
where F is the force vector given as:
F = (4 N) [tex]\hat{i}[/tex] + (2 N) [tex]\hat{j}[/tex] − (4 N) [tex]\hat{k}[/tex]
Taking the dot product of F and 5[tex]\hat{i}[/tex], we get:
[tex]F . 5 \hat{i} = (4 N) (5) + (2 N) (0) - (4 N) (0)\\\\ = 20 J[/tex]
Choice A is correct.
To know more about force, here
https://brainly.com/question/13191643
#SPJ1
suppose your portable dvd player draws a current of 194 ma at 9.00 v. how much power does the player require?
The portable DVD player requires 1.746 watts of power.
To calculate the power required by the portable DVD player, you can use the formula P = I x V, where P is power in watts, I is current in amperes, and V is voltage in volts.
Given that the player draws a current of 194 mA at 9.00 V, we need to convert the current to amperes by dividing it by 1000.
So, I = 194 mA / 1000 = 0.194 A
Using the formula P = I x V, we get:
P = 0.194 A x 9.00 V = 1.746 watts
Therefore, the portable DVD player requires 1.746 watts of power.
Learn More about DVD here :-
https://brainly.com/question/23896058
#SPJ11
find the distance in nm between two slits that produces the first minimum for 420-nm violet light at an angle of 13.5°. 899.60 correct: your answer is correct. nm
The distance between the two slits that produces the first minimum for 420-nm violet light at an angle of 13.5° is approximately 899.60 nm.
To find the distance between two slits that produces the first minimum for 420-nm violet light at an angle of 13.5°, we can use the formula for the angular position of the minima in a double-slit interference pattern:
mλ = d * sinθ
Here, m is the order of the minimum (m = 1 for the first minimum), λ is the wavelength of light, d is the distance between the slits, and θ is the angle.
We are given λ = 420 nm and θ = 13.5°, and we need to find d.
1. Convert the angle to radians: θ = 13.5° * (π/180) = 0.2354 radians
2. Rearrange the formula to solve for d: d = mλ / sinθ
3. Plug in the given values and solve for d: d = (1 * 420 nm) / sin(0.2354 radians)
d ≈ 899.60 nm
Therefore, the distance between the two slits that produces the first minimum for 420-nm violet light at an angle of 13.5° is approximately 899.60 nm.
For more information on angular position and distance between slits refer to https://brainly.com/question/15715225
#SPJ11
if you will be a science what would you be and how it will benefit the human race?
Answer:
In other words, science is one of the most important channels of knowledge. It has a specific role, as well as a variety of functions for the benefit of our society: creating new knowledge, improving education, and increasing the quality of our lives. Science must respond to societal needs and global challenges.
there is a specific term for the currents that are observed immediately after the potential is stepped down from a potential where there is a steady state conductance, to one where there is none. what is this term?
The term for the currents that are observed immediately after the potential is stepped down from a potential where there is a steady state conductance to one where there is none is called "transient currents."
Transient currents occur because the sudden change in potential causes a temporary disruption in the equilibrium of ions across the membrane. This leads to a flow of ions across the membrane, which creates a transient current. The magnitude and duration of transient currents can provide valuable information about the properties of ion channels and their gating mechanisms. When the voltage is changed, it causes a temporary disruption in the equilibrium of ions across the membrane, leading to a flow of ions across the membrane that creates a transient current.
Understanding transient currents is important in the study of ion channels and their role in cellular signalling, as well as in the development of drugs that target ion channels for therapeutic purposes.
To know more about Transient Currents visit:
https://brainly.com/question/30869810
#SPJ11
A charge is released from rest in an electric field. Neglect non-electrical forces. Independently of the sign of the charge, it will always move to a position a) with higher potential b) with lower potential c) where is has higher potential energy d) where it has lower potential energy e) where the electric field has higher magnitude f) where the electric field has lower magnitude
The answer is a) with higher potential.
When a charge is released from rest in an electric field, it will always move towards the region of higher potential, regardless of its sign.
This is because the electric field exerts a force on the charge, causing it to accelerate towards the region of higher potential. The potential energy of the charge will increase as it moves towards the higher potential region.
The magnitude of the electric field may vary in different regions, but it is the potential difference that determines the direction of the charge's motion.
Non-electrical forces can be neglected in this scenario.
To know more about electric field here
https://brainly.com/question/15800304
#SPJ11
A current loop is placed in a magnetic field as shown. If It is released from rest, what will the current loop do? TO B Select one: a. It will move upwardb. It will move downward c. It will rotate clockwise d. It will rotate counter clockwise e. None of the above
The answer is c. It will rotate clockwise. A current loop is placed in magnetic field as shown. If It is released from rest, it will rotate clockwise.
What is the magnetic field's effect on the current loop?With a magnetic field that is homogenous, there is no net force acting on a current loop. With a magnetic field that weakens to the right, a current loop with a magnetic moment pointing left is present.
What does a magnetic field generated by a circular loop of electricity look like?Every location along a circular loop carrying electricity has magnetic field lines that are concentric circles. The right-hand thumb rule may be used to determine the magnetic field direction of each segment of the circular loop.
To know more about current loop visit:-
https://brainly.com/question/15204409
#SPJ1
The answer is c. It will rotate clockwise. A current loop is placed in magnetic field as shown. If It is released from rest, it will rotate clockwise.
What is the magnetic field's effect on the current loop?With a magnetic field that is homogenous, there is no net force acting on a current loop. With a magnetic field that weakens to the right, a current loop with a magnetic moment pointing left is present.
What does a magnetic field generated by a circular loop of electricity look like?Every location along a circular loop carrying electricity has magnetic field lines that are concentric circles. The right-hand thumb rule may be used to determine the magnetic field direction of each segment of the circular loop.
To know more about current loop visit:-
https://brainly.com/question/15204409
#SPJ1
Write a general formula to describe the variation The square of T varies directly with the cube of a and inversely with the square of d: T= 3 when a = 4 and d = 2
T^2 = (Use integers or fractions for any numbers in the expression.)
The value of k, we can write the general formula:
T^2 = (9/16) * (a^3 / d^2)
To write a general formula describing the variation, we can use the given information:
The square of T varies directly with the cube of a and inversely with the square of d. We can express this relationship as:
T^2 = k * (a^3 / d^2)
Here, k is the constant of variation. Now, we'll use the given values of T, a, and d to find the value of k:
3^2 = k * (4^3 / 2^2)
9 = k * (64 / 4)
9 = k * 16
k = 9 / 16
Now that we've found the value of k, we can write the general formula:
T^2 = (9/16) * (a^3 / d^2)
To learn more about cube, refer below:
https://brainly.com/question/30962206
#SPJ11
An ideal gas is allowed to expand from 4.20 L to 18.9 L at constant temperature. If the initial pressure was 119 atm, what is the final pressure (in atm)? A. 25 atm B. 24.6 atm C. 26.4 atm D. 114.5 atm
To solve this problem, we can use the formula for the relationship between pressure and volume for an ideal gas. So, the final pressure of the ideal gas is approximately 26.4 atm, which corresponds to option C.
P1V1 = P2V2
where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.
We are given that the initial volume V1 is 4.20 L and the final volume V2 is 18.9 L. We are also given the initial pressure P1, which is 119 atm. We want to find the final pressure P2.
Plugging in the values we know into the formula, we get:
(119 atm)(4.20 L) = P2(18.9 L)
Solving for P2, we get:
P2 = (119 atm)(4.20 L) / 18.9 L
P2 = 26.4 atm
Therefore, the final pressure is 26.4 atm, which is answer choice C.
To find the final pressure of an ideal gas that expands from 4.20 L to 18.9 L at constant temperature with an initial pressure of 119 atm, we can use Boyle's Law. Boyle's Law states that for an ideal gas at constant temperature, the product of pressure and volume remains constant. Mathematically, it can be represented as:
P1 * V1 = P2 * V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
We are given:
P1 = 119 atm
V1 = 4.20 L
V2 = 18.9 L
We need to find P2 (final pressure).
Using Boyle's Law, we have:
119 atm * 4.20 L = P2 * 18.9 L
Now, we can solve for P2:
P2 = (119 atm * 4.20 L) / 18.9 L
P2 ≈ 26.4 atm
So, the final pressure of the ideal gas is approximately 26.4 atm, which corresponds to option C.
Visit here to learn more about Pressure:
brainly.com/question/12977546
#SPJ11
The centripetal force acting on a 0.30 kg object moving with a tangential velocity of 12 m/s in a 0.80 m radius circle is N. 0 4.5 0 54 380 O None of the above
Answer:
F = M a = M v^2 / R
F = .3 * 12^2 / .8 = 54 N
a balloon containing methane gas has a volume of 2.40 l at 57.0 °c . what volume will the balloon occupy at 114 °c ?
If the pressure stays constant at atmospheric pressure, the balloon containing methane gas will have a volume of 4.80 L at 114 °C. However, if the pressure changes, the final volume will be different.
To solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas,
(P1 * V1) / T1 = (P2 * V2) / T2
where P1 and P2 are the initial and final pressures (which we can assume to be constant), V1 is the initial volume, V2 is the final volume (what we're trying to find), T1 is the initial temperature, and T2 is the final temperature.
We're given that the initial volume (V1) is 2.40 L, the initial temperature (T1) is 57.0 °C, and the final temperature (T2) is 114 °C. We're trying to find the final volume (V2). We're not given the pressure, but we can assume it's constant (since the balloon isn't being compressed or expanding).
Plugging in the values we have, we get,
(P1 * 2.40) / 57.0 = (P2 * V2) / 114
We can simplify this equation by multiplying both sides by 114,
(P1 * 2.40 * 114) / 57.0 = P2 * V2
Now we can solve for V2 by dividing both sides by P2,
V2 = (P1 * 2.40 * 114) / (57.0 * P2)
Since we don't know the pressure, we can't solve for the exact final volume. However, we can make some assumptions. For example, if we assume that the pressure stays constant at atmospheric pressure (which is around 1 atm), we can plug that value in for P1 and P2:
V2 = (1 * 2.40 * 114) / (57.0 * 1) = 4.80 L
Therefore, the balloon carrying methane gas will have a capacity of 4.80 L at 114 °C if the pressure remains constant at atmospheric pressure. However, the ultimate volume will vary if the pressure varies.
Learn more about "volume": https://brainly.com/question/463363
#SPJ11
Alpha particles (charge q = +2e, mass m = 6.6×10−27kg) move at 1.8×106 m/s What magnetic field strength would be required to bend them into a circular path of radius r = 0.14 m ?
The magnetic field that is required to bend the charged particle into a circular path is 1.42×10⁻³ T.
To calculate the magnetic field strength required to bend alpha particles into a circular path of radius r = 0.14 m, we can use the equation:
[tex]B = \frac{m\times v}{q\times r}[/tex]
where B is the magnetic field strength, m is the mass of the alpha particle, v is its velocity, q is its charge, and r is the radius of the circular path.
Plugging in the given values, we get:
[tex]B = \frac {6.6\times 10^{-27} \ kg \times 1.8\times 10^6 \ m/s} { 2e \times 0.14 \ m}[/tex]
where 2e represents the charge of the alpha particle.
Simplifying this equation, we get:
B = 1.42×10⁻³ T
Therefore, a magnetic field strength of 1.42×10⁻³ T would be required to bend alpha particles with charge q = +2e and mass m = 6.6×10⁻²⁷ kg into a circular path of radius r = 0.14 m.
Learn more about the magnetic field:
https://brainly.com/question/7645789
#SPJ11
A supernova explosion of a 2.00×1031 kg star produces 1.00×1044 kg of energy. (a) How many kilograms of mass are converted to energy in the explosion? (b) What is the ratio Δm / m of mass destroyed to the original mass of the star?
a)1.11×10²⁷kg of mass was converted to energy in the supernova explosion.
b)The ratio of mass destroyed to the original mass of the star is approximately 0.9995.
(a) Using Einstein's famous equation E = mc², we can calculate the mass that was converted to energy in the supernova explosion. Rearranging the equation, we get m = E/c². Substituting the given values, we get:
m = (1.00×10⁴⁴kg) / (3.00×10⁸ m/s)²
m = 1.11×10^27 kg
Therefore, approximately 1.11×10²⁷ kg of mass was converted to energy in the supernova explosion.
(b) The ratio Δm / m can be calculated by dividing the mass destroyed (Δm) by the original mass of the star (m). The mass destroyed is the difference between the original mass and the mass that was converted to energy. Therefore:
Δm = 2.00×10³¹kg - 1.11×10²⁷ kg
Δm = 1.999×10^31 kg
Now, dividing Δm by m:
Δm / m = 1.999×10³¹kg / 2.00×10³¹ kg
Δm / m = 0.9995
Therefore, the ratio of mass destroyed to the original mass of the star is approximately 0.9995.
To learn more about energy https://brainly.com/question/27397088
#SPJ11
to 56.4°c contains pure carbon resistors. what is the percent difference in resistance over this range? the temperature coefficient of resistivity for carbon is −0.500 ✕ 10-3/°c.
tThe percent difference in resistance over this temperature range is 2.82% when coefficient of resistivity for carbon is -0.500 × 10⁻³/°C.
To determine the percent difference in resistance over this range, we need to use the given temperature coefficient of resistivity for carbon, which is -0.500 × 10⁻³/°C. First, we need to find the change in resistance:
ΔR = R × α × ΔT
Where ΔR is the change in resistance, R is the initial resistance, α is the temperature coefficient of resistivity, and ΔT is the change in temperature.
In this case, ΔT = 56.4°C, and α = -0.500 × 10⁻³/°C. We can't find the exact change in resistance without the initial resistance value, but we can still find the percent difference in resistance:
Percent difference = (ΔR / R) × 100
Plugging in the given values:
Percent difference = (R × (-0.500 × 10⁻³/°C) × 56.4°C) / R × 100
The R values cancel out, leaving:
Percent difference = (-0.500 × 10⁻³/°C × 56.4°C) × 100 = -2.82%
The negative sign indicates a decrease in resistance, so the percent difference in resistance over this temperature range is 2.82%.
Learn more about resistivity :
https://brainly.com/question/30799966
#SPJ11
A torque of 10 N•m causes a wheel to rotate 90º. How much work is done by the force that provides this torque?Group of answer choicesa. 16 Jb. 900 Jc. 9 Jd. 31 J
Option a. The work done by the force that provides this torque is 16 J.
To calculate the work done by the force that provides a torque of 10 N•m and causes a wheel to rotate 90º, we can use the formula:
Work done = Torque × Angular displacement × cosθ
In this case, the torque is 10 N•m, the angular displacement is 90º, and the angle between the force and displacement vectors (θ) is 0º because they are in the same direction. To use the formula, we first need to convert the angular displacement from degrees to radians:
90º × (π/180) = π/2 radians
Now, we can calculate the work done:
Work done = 10 N•m × (π/2) × cos(0º) = 10 N•m × (π/2) × 1 = 5π N•m
To find the closest answer choice, let's approximate the value of 5π:
5π ≈ 5 × 3.14 ≈ 15.7 J
The closest answer choice to 15.7 J is option a. 16 J
learn more about "Torque " at: https://brainly.com/question/29024338
#SPJ11
a 12.8 μf capacitor is connected through a 0.885 mω resistor to a constant potential difference of 60.0 v. A.Compute the charge on the capacitor at the following times after the connections are made: 0, 5.0 s, 10.0 s, 20.0 s, and 100.0 s.
The charge on the capacitor at times 0s, 5.0s, 10.0s, 20.0s, and 100.0s after connections are made are 0μC, 510.7μC, 648.1μC, 742.2μC, and 767.5μC, respectively.
How to find the charge on the capacitor?The charge on a capacitor at any time t can be calculated using the formula:
Q(t) = [tex]Q_m_a_x * (1 - e^(^-^t^/^R^C^))[/tex]
Where [tex]Q_m_a_x[/tex] is the maximum charge that the capacitor can hold, R is the resistance in ohms, C is the capacitance in farads, and e is the base of the natural logarithm.
In this case, [tex]Q_m_a_x[/tex] is the initial charge on the capacitor when the potential difference is applied, which is:
[tex]Q_m_a_x[/tex] = C * V = 12.8 μF * 60.0 V = 768 μC
Plugging in the given values, we get:
Q(t) = 768 μC * (1 - [tex]e^(^-^t^/^(^0^.^8^8^5^m ^\Omega ^*^1^2^.^8^\mu^F^)^)[/tex])
Simplifying this expression, we get:
Q(t) = 768 μC * [tex](1 - e^(^-^t^/^1^1^.^2^1^2^8^s^)[/tex])
Now we can calculate the charge on the capacitor at the given times:
At t = 0:
Q(0) = 768 μC * [tex](1 - e^(^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 0
At t = 5.0 s:
Q(5.0 s) = 768 μC * [tex](1 - e^(^-^5^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 510.7 μC
At t = 10.0 s:
Q(10.0 s) = 768 μC * [tex](1 - e^(^-^1^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 648.1 μC
At t = 20.0 s:
Q(20.0 s) = 768 μC * [tex](1 - e^(^-^2^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 742.2 μC
At t = 100.0 s:
Q(100.0 s) = 768 μC * [tex](1 - e^(^-^1^0^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 767.5 μC
Therefore, the charge on the capacitor at times 0s, 5.0s, 10.0s, 20.0s, and 100.0s after the connections are made are 0μC, 510.7μC, 648.1μC, 742.2μC, and 767.5μC, respectively.
Learn more about capacitor
brainly.com/question/17176550
#SPJ11
In an experiment, the diffraction pattern from a single slit was recorded with light of wavelength 700 nm on a screen held 100 cm from the slit. The distance between the first order minima on either side of the central maximum was measured to be 5.9 cm and the corresponding distance for the second order was 12.3 cm. Calculate the average width of the slit using both the first and second order data.
The average width of the slit is approximately 23,247 nm.
To calculate the average width of the slit using both the first and second-order data, we will first use the formula for single-slit diffraction:
sinθ = mλ / a
where θ is the angle of diffraction, m is the order of the minima (1 for the first order and 2 for the second order), λ is the wavelength of light (700 nm), and a is the width of the slit.
First, we need to calculate the angle of diffraction for both the first and second-order minima. Since the distance between the screen and the slit is 100 cm, we can use the small-angle approximation:
tanθ ≈ sinθ ≈ y / L
where y is the distance between the central maximum and the minima, and L is the distance from the slit to the screen.
For the first order (m = 1), y1 = 5.9 cm / 2 = 2.95 cm:
sinθ1 ≈ 2.95 cm / 100 cm = 0.0295
For the second order (m = 2), y2 = 12.3 cm / 2 = 6.15 cm:
sinθ2 ≈ 6.15 cm / 100 cm = 0.0615
Now, we can use the single-slit diffraction formula to calculate the width of the slit for both orders:
For the first order (m = 1):
a1 = 1(700 nm) / sinθ1 = 700 nm / 0.0295 = 23729 nm
For the second order (m = 2):
a2 = 2(700 nm) / sinθ2 = 1400 nm / 0.0615 = 22764 nm
Finally, we can calculate the average width of the slit using both the first and second-order data:
a_avg = (a1 + a2) / 2 = (23729 nm + 22764 nm) / 2 = 23246.5 nm
You can learn more about average width at: brainly.com/question/29655412
#SPJ11
Why is it that continually displacing the ring from its equilibrium position, releasing it, and watching its subsequent behavior as you adjust the mass and/or angle of the equilibrant will give you more precise results then simply letting the ring move on its own?
Method of adjustment is a precise experimental technique, while allowing the system to move on its own can be influenced by external factors.
How does the method of adjustment help in determining the properties of a physical system?Continually displacing the ring from its equilibrium position, releasing it, and watching its subsequent behavior as you adjust the mass and/or angle of the equilibrant is known as an experimental technique called "method of adjustment". This technique is used to determine the value of a physical quantity with a high degree of precision.
When the ring is simply allowed to move on its own, it will oscillate back and forth until it comes to rest. This motion is affected by a number of factors, including the mass and angle of the equilibrant, the elasticity of the ring, and any other external factors that may be present. As a result, it can be difficult to accurately measure the period of oscillation or other properties of the system.
By contrast, the method of adjustment involves carefully adjusting the mass and/or angle of the equilibrant until the ring oscillates at a desired frequency or exhibits a desired behavior. This allows for a more precise determination of the system's properties, as the experimenter can fine-tune the system until it behaves in the desired manner. This method is particularly useful when working with systems that have small oscillations, as it allows for a more accurate determination of the period and other properties of the system.
In summary, the method of adjustment allows for a more precise determination of the properties of a physical system by allowing the experimenter to fine-tune the system until it behaves in the desired manner, whereas simply letting the system move on its own can be affected by a variety of external factors that can make accurate measurements difficult.
Learn more about method of adjustment
brainly.com/question/28500977
#SPJ11
what current flows when a 45 v potential difference is imposed across a 1.8 kω resistor?
When a 45 V potential difference is applied across a 1.8 kΩ resistor, a current flows through the resistor, following Ohm's law (I = V/R). Therefore, the current can be calculated by dividing the voltage by the resistance: I = 45 V / 1.8 kΩ = 0.025 A. This means that a current of 0.025 A, or 25 milliamperes (mA), flows through the resistor.
The flow of current through the resistor can cause various effects, depending on the circuit design and the properties of the resistor itself. For example, the resistor may generate heat as a result of the current flow, which can be a concern in some applications.
Additionally, the resistor can serve to limit the amount of current that flows through the circuit, which can help protect other components from damage due to overloading or short circuits.
Overall, understanding how current flows through resistors and other components is essential for designing and troubleshooting electrical circuits. By applying the principles of Ohm's law and other fundamental concepts, engineers, and technicians can ensure that circuits operate safely and effectively.
To know more about Ohm's law refer here:
https://brainly.com/question/1247379#
#SPJ11
Suppose you start an antique car by exerting a force of 290 N on its crank for 0.13 s.
What angular momentum is given to the engine if the handle of the crank is 0.38 m from the pivot and the force is exerted to create maximum torque the entire time?
The angular momentum given to the engine is 44.2 Nms.
Angular momentum (L) is given by the equation L = r * F * Δt, where r is the distance from the pivot (0.38 m), F is the force exerted (290 N), and Δt is the time duration for which the force is applied (0.13 s).
To create maximum torque, the force should be applied for the entire time duration. Thus, Δt is equal to 0.13 s. Plugging in these values, we get L = 0.38 * 290 * 0.13 = 44.2 Nms as the angular momentum given to the engine.
For more questions like Momentum click the link below:
https://brainly.com/question/30677308
#SPJ11
does the moment of inertia of an object depend on the kinematics of the object, for example speed/acceleration
The moment of inertia of an object does not depend on the kinematics of the object, such as speed or acceleration.
Kinematics is a subfield of physics, developed in classical mechanics, that describes the motion of points, bodies, and systems of bodies without considering the forces that cause them to move.
The moment of inertia is a measure of an object's resistance to rotational motion, and it is affected by the distribution of mass within the object.
The moment of inertia is a property of an object that describes its resistance to rotational motion, and it depends on the mass distribution and the axis of rotation.
It is independent of the kinematic factors like speed or acceleration, which describe the motion of the object.
Learn more about inertia:
https://brainly.com/question/1140505
#SPJ11
Suppose an ideal gas undergoes isobaric (constant pressure) compression. 1) Which expression about the entropy of the environment and the gas is correct? a. ASgas > 0 b. ASeny + ASgas > 0 c. ASeny + ASgas 0 = Submit (Survey Question) 2) Briefly explain your reasoning.
The correct expression for the entropy change of the environment and the gas during an isobaric compression is:
b. ΔS_env + ΔS_gas > 0
During an isobaric compression, the gas is compressed at constant pressure. The reasoning behind this choice is as follows: In an isobaric process, the pressure remains constant throughout the compression. When an ideal gas undergoes compression, its volume decreases, and consequently, its entropy (ΔS_gas) also decreases, resulting in a negative value for ΔS_gas. However, the second law of thermodynamics states that the total entropy of a closed system, including the environment (ΔS_env), must always increase or remain constant. During the compression process, heat is transferred from the gas to the environment, which in turn increases the entropy of the environment (ΔS_env). Therefore, the sum of the entropy changes for both the gas and the environment (ΔS_env + ΔS_gas) must be greater than 0 to satisfy the second law of thermodynamics.
To learn more about isobaric compression click here
https://brainly.com/question/13369842
#SPJ11
Part A
Determine the bending stress developed at corner A. Take M = 55kN?m .
Part B
Determine the bending stress developed at corner B. Take M = 55kN?m .
Part C
What is the orientation of the neutral axis?
(a) The bending stress at corner A is 6.67 kPa.
(b) The bending stress at corner B is 2.22 kPa.
(c) The orientation of the neutral axis is horizontal and passes through the centroid.
How to find the bending stress at corner A?(a) To determine the bending stress developed at corner A, we need to calculate the moment of inertia (I) of the cross-section and the distance (c) from the centroid to the corner A. Then, we can use the formula:
σ = Mc/Ic
where σ is the bending stress, M is the bending moment, and Ic is the moment of inertia about the centroidal axis.
Assuming the cross-section is rectangular, we have:
I = [tex]bh^3[/tex]/12, where b is the base and h is the height
c = h/2
Substituting these values and M = 55 kN/m, we get:
σ = (55 kN/m)(h/2)/([tex]bh^3[/tex]/12) = 6.67 kPa
Therefore, the bending stress developed at corner A is 6.67 kPa.
How to find the bending stress at corner B?(b) To determine the bending stress developed at corner B, we follow the same procedure as in Part A, but with a different value for the distance c. Assuming the cross-section is rectangular and symmetric, we have:
c = b/2
Substituting this value and M = 55 kN/m, we get:
σ = (55 kN/m)(b/2)/([tex]bh^3[/tex]/12) = 2.22 kPa
Therefore, the bending stress developed at corner B is 2.22 kPa.
How to find orientation of the neutral axis?(c) The neutral axis is the line on which the stress is zero during bending. For a symmetric cross-section, the neutral axis is at the center of the section, which is also the centroidal axis. Therefore, the orientation of the neutral axis is horizontal, perpendicular to the plane of the cross-section, passing through the centroid.
Learn more about Bending stress
brainly.com/question/24282973
#SPJ11
A'B'C' is the image of ABC, if the distance between ABC and the mirror is 80 cm, what is distance between the object and it's mirror (it's not 160)
Answer:
If A'B'C' is the image of ABC in the mirror, then the distance between the object (ABC) and its mirror is equal to the distance between A'B'C' and the mirror.
Let's call the distance between A'B'C' and the mirror "d". According to the problem, we know that:
d = 80 cm
However, we need to find the distance between ABC and its mirror, which we can call "x". We know that:
x + d = 2x
Simplifying this equation, we get:
d = x
Substituting the value of "d" from the first equation, we get:
x = 80 cm
Therefore, the distance between the object (ABC) and its mirror is also 80 cm, which is the same as the distance between A'B'C' and the mirror.
Explanation: