A ladybug lands on the end of a clock's second hand
when the hand is pointing straight up. The second
hand is 1 foot long and when it rotates and points
directly to the right, the ladybug is 10 feet above the
ground.
1. How far above the ground is the ladybug after 0, 30,
45, and 60 seconds have passed?

The molecular shape of beryllium fluoride (BeF2) is linear. The molecular shape of hydrogen sulfide (H2S) is bent with a bond angle of approximately 92 degrees.

predict the molecular shape of these compounds:

1. Ammonia (NH3):
Ammonia has a central nitrogen atom with three hydrogen atoms bonded to it and one lone pair of electrons. This gives it a molecular shape of trigonal pyramidal.

2. Ammonium (NH4+):
Ammonium has a central nitrogen atom with four hydrogen atoms bonded to it. It does not have any lone pairs of electrons. This gives it the molecular shape of a tetrahedral.

3. Beryllium fluoride (BeF2):
Beryllium fluoride has a central beryllium atom with two fluorine atoms bonded to it. It does not have any lone pairs of electrons. This gives it a molecular shape of linear.

4. Hydrogen sulfide (H2S):
Hydrogen sulfide has a central sulfur atom with two hydrogen atoms bonded to it and two lone pairs of electrons. This gives it a molecular shape of bent.

to learn more about trigonal pyramidal click here:

https://brainly.com/question/31129852

#SPJ11

The point of intersection is (0, 3). This means that the graphs of g(x) and h(x) intersect at the point where x=0 and y=3.

To find the point of intersection between the graphs of g(x)=2x+3 and h(x)=5x+3, we need to solve the equation g(x) = h(x) for x:

2x + 3 = 5x + 3

Subtracting 2x from both sides, we get:

3 = 3x + 3

Subtracting 3 from both sides, we get:

0 = 3x

Dividing both sides by 3, we get:

x = 0

So the graphs of g(x) and h(x) intersect at x = 0. To find the y-coordinate of the point of intersection, we can substitute x = 0 into either g(x) or h(x). Using g(x), we get:

g(0) = 2(0) + 3 = 3

To learn more about graphs here:

https://brainly.com/question/13690481

#SPJ1

Answer:

C

Step-by-step explanation:

Sin is opposite divided by hypotenuse, so that would be 21 divided by 35.

To write this distance in scientific notation, we can express it as:

[tex]1.08[/tex] × [tex]10^8 km[/tex]

Distance refers to the physical length or space between two objects or points, measured typically in units such as meters, kilometers, miles, etc.

Light travels at a constant speed of approximately 299,792,458 meters per second (m/s) in a vacuum. To convert this speed to kilometers per minute, we can use the following steps:

Multiply the speed of light in meters per second by the number of seconds in one minute:

299,792,458 m/s × 60 seconds/minute = 17,987,547,480 m/minute

Convert this distance from meters to kilometers by dividing by 1,000:

17,987,547,480 m/minute ÷ 1,000 = 17,987,547.48 km/minute

Therefore, light travels approximately 17.99 million kilometers per minute.

To find out how far light travels in 6 minutes, we can multiply the distance it travels in one minute by 6:

17,987,547.48 km/minute × 6 minutes = 107,925,284.88 km

To write this distance in scientific notation, we can express it as a number between 1 and 10 multiplied by a power of 10:

107,925,284.88 km = 1.0792528488 × [tex]10^8 km[/tex]

Rounding this to two significant figures gives:

[tex]1.08[/tex] × [tex]10^8 km[/tex]

To know more about distance visit:

https://brainly.com/question/30395212

#SPJ1

The cylindrical coordinates of the point with rectangular coordinates (x, y, z) = (-3, 5, -1) are (ρ, θ, z) ≈ (sqrt(34), -1.03, -1).

Cylindrical coordinates are a type of coordinate system used in three-dimensional space to locate a point using three coordinates: ρ, θ, and z. The cylindrical coordinate system is based on a cylindrical surface that extends infinitely in the z-direction and has a radius of ρ in the xy-plane.

To convert rectangular coordinates (x, y, z) to cylindrical coordinates (ρ, θ, z), we use the following formulas:

ρ =[tex]\sqrt(x^2 + y^2)[/tex]

θ = arctan(y/x)

z = z

Substituting the given values, we get:

ρ = [tex]\sqrt((-3)^2 + 5^2)[/tex]= sqrt(34)

θ = arctan(5/-3) ≈ -1.03 radians or ≈ -58.8 degrees (measured counterclockwise from the positive x-axis)

z = -1

Therefore, the cylindrical coordinates of the point with rectangular coordinates (x, y, z) = (-3, 5, -1) are (ρ, θ, z) ≈ (sqrt(34), -1.03, -1).

To learn more about cylindrical coordinates   visit:

https://brainly.com/question/31046653

#SPJ11

Answer:

f(2) = 24

Step-by-step explanation:

to evaluate f(2) substitute x = 2 into f(x) , that is

f(2) = 15(2) - 6 = 30 - 6 = 24

Number of books - 4

Number of pencils - 7

Now, we can order this as a ratio.

A ratio is two numbers put as a proportion. It's normally written out as first number: second number.

In this case, it's the ratio of number of

books: number of pencils.

Fill in the number of books and number of pencils into each side of the equation.

number of books: number of pencils

4 books: 7 pencils (the unit is normally dropped)

So therefore, 4:7 would be your final answer.

Note

Note you have asked for ratio but option is in fraction

Hope this helped!

please make me brainalist and keep smiling dude I hope you will be satisfied with my answer is updated

Answer: Ratio of the books to pencil is

Step-by-step explanation:

There are:

7 pencils

5 books

So the ratio of books to pencils is 5:7

To know more in detail about https://brainly.com/question/12145500?referrer=searchResults

Okay, let's solve this step-by-step:

We are given the recursion relation:

D(k) = p(k-1), k = 1, 2, ...

This means each probability depends on the previous one.

So to calculate p(4), we need to start from the beginning:

p(0) is not given, so we'll assume it's some initial value, call it p0.

Then p(1) = p0  (from the recursion relation)

p(2) = p(1) = p0  (again from the recursion relation)

p(3) = p(2) = p0  

p(4) = p(3) = p0

So in the end, p(4) = p0.

We are given the options for p0:

A) 0.07  B) 0.08  C) 0.09  D) 0.10  E) 0.11

Therefore, the answer is E: p(4) = 0.11

Answer:

(3)

Step-by-step explanation:

the limit lines are the same (and correct) in all 4 pictures.

the difference is the applicable side of the lines.

y <= x + 3

because of the "<=" the valid area is below the line. in our case to the right and below the line.

that eliminates (1) and (4).

y >= -2x - 2

because of the ">=" the valid area is above the line. in our case right and above the line.

so, (3) is correct.

Answer:

Step-by-step explanation:

You are asked for the area and perimeter of a figure comprised of a square and two sectors.

The perimeter of the figure is the sum of the lengths of the outside edges. You recognize vertical edges AD and BC as being the sides of a square that are 4 units long.

The other two sides of the square are AB and CD, but these are not part of the perimeter. The significance of those is that they are radii of the sectors ABE and CDF. The straight segments of AE and CF of those sectors have the same length (4 units) as the side of the square. Those straight segments are part of the perimeter.

In effect, the four straight segments of the perimeter are all 4 units.

The curved edges of the two sectors have a length that is found using the formula ...

  s = rθ

where r is the sector radius, and θ is the central angle in radians.

The angle is shown as 30°, which is 30°(π/180°) = π/6 radians. The radius is the square side length, 4, so each curved line has length ...

  s = (4)(π/6) = 2/3·π

The perimeter of the figure is the sum of the lengths of the straight segments and the curved arcs:

  P = 4(4 units) +2(2/3π units) = 16 +4/3π units ≈ 20.19 units

As with the perimeter, the area is composed of the area of a square and the areas of two sectors.

The area of the square is the square of its side length:

  A = s²

  A = (4 units)² = 16 units²

The area of each sector is effectively the area of a triangle with base equal to the arc length (2/3π) and height equal to the radius of the arc (4 units). The sector area is ...

  A = 1/2rs

  A = 1/2(4 units)(2/3π units) = 4/3π units²

The area of the whole figure is the sum of the area of the square and the areas of the two sectors:

  A = square area + 2×(sector area)

  A = 16 units² + 2×(4/3π units²) = (16 +8/3π) units² ≈ 24.38 units²

__

Additional comment

In general, you find the perimeter and/or area of a strange figure by decomposing it into parts whose perimeter and area you can compute. (When you get to calculus, those parts will be infinitesimally small and there will be an infinite number of them.) At this point, you will generally be making use of formulas that should be familiar.

The formula for the area of a sector is usually written ...

  A = 1/2r²θ

Here, we have made use of our previous computation of s=rθ to write the area formula as A = 1/2rs. The similarity to the triangle area formula is not accidental.

The value of the line integral is [tex]3/10 b^5[/tex].

To integrate [tex]f(x,y)xy[/tex] over the curve [tex]c: x^2y^2[/tex] in the first quadrant from (a,0) to (0,b), we need to parameterize the curve c and then evaluate the line integral.

Let's start by parameterizing the curve c:

[tex]x = t[/tex]

[tex]y = sqrt(b^2 - t^2)[/tex]

where [tex]0 ≤ t ≤ a[/tex]

Note that we used the equation [tex]x^2y^2 = a^2b^2[/tex] to solve for y in terms of x. We also restricted t to the interval [0,a] to ensure that the curve c lies in the first quadrant and goes from (a,0) to (0,b).

Next, we need to evaluate the line integral:

[tex]∫_c f(x,y)xy ds[/tex]

where ds is the differential arc length along the curve c. We can express ds in terms of dt:

[tex]ds = sqrt(dx/dt^2 + dy/dt^2) dt[/tex]

where dx/dt and dy/dt are the derivatives of x and y with respect to t, respectively.

Substituting the parameterization and ds into the line integral, we get:

[tex]∫_c f(x,y)xy ds = ∫_0^a f(t, sqrt(b^2 - t^2)) * t * sqrt(b^2 + (-t^2 + b^2)) dt[/tex]

[tex]= ∫_0^a f(t, sqrt(b^2 - t^2)) * t * sqrt(2b^2 - t^2) dt[/tex]

[tex]= ∫_0^a t^3 * (b^2 - t^2) * sqrt(2b^2 - t^2) dt[/tex]

Now, we can integrate this expression using substitution. Let [tex]u = 2b^2 - t^2[/tex], then [tex]du/dt = -2t and dt = -du/(2t)[/tex]. Substituting, we get:

sq[tex]∫_0^a t^3 * (b^2 - t^2) * sqrt(2b^2 - t^2) dt = -1/2 * ∫_u(2b^2) (b^2 - u/2) *[/tex]

[tex]rt(u) du[/tex]

[tex]= -1/2 * [∫_u(2b^2) b^2 * sqrt(u) du - 1/2 ∫_u(2b^2) u^(3/2) du][/tex]

[tex]= -1/2 * [2/5 b^2 u^(5/2) - 1/10 u^(5/2)]_u(2b^2)[/tex]

[tex]= -1/2 * [2/5 b^2 (2b^2)^(5/2) - 1/10 (2b^2)^(5/2) - 2/5 b^2 u^(5/2) + 1/10 u^(5/2)]_0^(2b)[/tex]

[tex]= -1/2 * [4/5 b^5 - 1/10 (2b^2)^(5/2)][/tex]

[tex]= 2/5 b^5 - 1/20 b^5[/tex]

[tex]= 3/10 b^5[/tex]

Therefore, the value of the line integral is [tex]3/10 b^5[/tex].

To learn more about parameterize visit:

https://brainly.com/question/31055234

#SPJ11

Answer:

$1,233

Step-by-step explanation:

Answer:

$1,233

Step-by-step explanation:

$16 an hour for mowing

$25 for pulling weeds

September - she mowed lawns for 63 hours and pulled weeds for 9 hours.

16(63) + 25(9) = $1,233

Answer:

Let’s call the width of the rectangle “w”. Since the length of the rectangle is twice its width, we can call the length “2w”. We know that the diagonal of the rectangle is equal to the square root of 45 cm. Using Pythagorean theorem, we can find that:

diagonal^2 = length^2 + width^2 45 = (2w)^2 + w^2 45 = 4w^2 + w^2 45 = 5w^2 w^2 = 9 w = 3

So the width of the rectangle is 3 cm and its length is twice that, or 6 cm.

Step-by-step explanation:

The tangential component of acceleration is c. aT = 4t/√4t²+5.

We need to follow these steps:

1. Calculate the first derivative of r(t) to get the velocity vector v(t).
2. Calculate the second derivative of r(t) to get the acceleration vector a(t).
3. Calculate the magnitude of the velocity vector |v(t)|.
4. Calculate the tangential component of acceleration aT by finding the dot product of a(t) and v(t), and then dividing by the magnitude of the velocity vector |v(t)|.

Let's go through these steps:

1. r(t) = ti + t²j + 2tk
  v(t) = dr(t)/dt = (1)i + (2t)j + (2)k

2. a(t) = dv(t)/dt = (0)i + (2)j + (0)k

3. |v(t)| = √(1² + (2t)² + 2²) = √(1 + 4t² + 4) = √(4t² + 5)

4. aT = (a(t) • v(t)) / |v(t)| = ((0)(1) + (2)(2t) + (0)(2)) / √(4t² + 5) = (4t) / √(4t² + 5)

So, the tangential component of acceleration is:

aT = 4t / √(4t² + 5)

This corresponds to option c. aT = 4t/√4t²+5.

Learn more about tangential component.

brainly.com/question/30029917

#SPJ11

The given differential equations can be rewritten in matrix-vector form as dX/dt = AX, where X = [x₁, x₂]ᵀ and A = [[2, 1], [1, 2]].

To rewrite the given differential equations in matrix-vector form, follow these steps:

1. Identify the dependent variables, x₁ and x₂, and arrange them into a column vector, X. This gives X = [x₁, x₂]ᵀ.

2. Identify the coefficients of x₁ and x₂ in the given differential equations. For dx₁/dt = 2x₁ + x₂ and dx₂/dt = x₁ + 2x₂, these coefficients are 2, 1, 1, and 2.

3. Arrange the coefficients into a matrix A, with rows corresponding to the order of the dependent variables. This gives A = [[2, 1], [1, 2]].

4. Write the matrix-vector equation dX/dt = AX. This represents the original system of differential equations in matrix-vector form.

To know more about differential equations click on below link:

https://brainly.com/question/14620493#

#SPJ11

The number of bacteria in a bacteria culture after following number of hours are: a) After 3 hours, there are 12,800 bacteria. b) After t hours, there are 200 * 2^(2t) bacteria. c) After 40 minutes, there are 400 bacteria.

Given that the bacteria culture starts with 200 bacteria and doubles in size every half hour.

a) To find this, we first need to determine how many half-hour intervals are in 3 hours. Since there are 2 half-hours in an hour, we have 3 hours * 2 = 6 half-hour intervals. The bacteria doubles in size every half hour, so we have:
200 bacteria * 2^6 = 200 * 64 = 12,800 bacteria

b) To generalize this for any number of hours (t), we need to find how many half-hour intervals are in t hours. That's 2t half-hour intervals. Then we have:
200 bacteria * 2^(2t)

c) First, we need to convert 40 minutes to hours. Since there are 60 minutes in an hour, we have 40/60 = 2/3 hours. We then find how many half-hour intervals are in 2/3 hours: (2/3) * 2 = 4/3 intervals. Since we can't have a fraction of an interval, we'll round down to 1 interval (since the bacteria doubles every half-hour). Then we have:
200 bacteria * 2^1 = 200 * 2 = 400 bacteria

Know more about bacteria culture here:

https://brainly.com/question/29180886

#SPJ11

If a and b are both positive integers, then (2a − 1) mod (2b − 1) = 2a mod b − 1, because the left side can be rewritten as (2a mod (2b − 1)) - 1, which equals the right side.

To show that (2a − 1) mod (2b − 1) = 2a mod b − 1, let's break it down step-by-step:

1. Consider (2a − 1) mod (2b − 1). Apply the property of modular arithmetic, which states that (A mod N) = (A mod N) mod N.

2. This gives us (2a mod (2b − 1)) - 1.

3. Observe that 2a mod (2b − 1) can also be written as 2a mod (2(b − 1) + 1), which equals 2a mod 2(b - 1) + 2a mod 1.

4. Since 2a mod 1 = 0, we have 2a mod 2(b - 1) + 0 = 2a mod 2(b - 1).

5. Apply the distributive property of modular arithmetic to get 2(a mod (b - 1)) = 2a mod b.

6. Substitute this back into the expression from step 2: (2a mod b) - 1.

7. Therefore, (2a − 1) mod (2b − 1) = 2a mod b − 1.

To know more about modular arithmetic click on below link:

https://brainly.com/question/29022762#

#SPJ11

Answer:

Supplementary angle= two angle that sum upto 180 degrees.

Step-by-step explanation:

[tex]180 - 22 = 158[/tex]

Supplementary angle of 22° is 158°

The following parts can be answered by the concept of null hypothesis.

a) The best conclusion if H0 is rejected is (ii) The scale is not in calibration.

b) If the scale is actually in calibration but the conclusion is reached that the scale is not in calibration, it would be a Type I error

a) If H0 is rejected, it means that there is enough evidence to suggest that the population mean reading on the scale is not equal to 10, which indicates that the scale is not in calibration. Therefore, the best conclusion in this case would be (ii) The scale is not in calibration.

b) If the conclusion is reached that the scale is not in calibration, but in reality, it is actually in calibration (i.e., μ=10), it would be a Type I error. This is because the null hypothesis (H0) is rejected incorrectly, leading to a false conclusion. Therefore, the type of error in this case would be a Type I error.

Therefore, the answer is:

a) The best conclusion if H0 is rejected is (ii) The scale is not in calibration.

b) If the scale is actually in calibration but the conclusion is reached that the scale is not in calibration, it would be a Type I error

To learn more about null hypothesis here:

brainly.com/question/30465063#

#SPJ11

The linear equation in point-slope form is:

y + 6 = (3/4)*(x + 4)

For a linear equation whose slope is m, and we know that it passes through a point (x₁, y₁), the point slope form can be written as follows:

y - y₁ = m*(x - x₁)

Here we know that the slope of the linear equations is (3/4) and the point is (-4, -6)

Then the linear equation in the point slope form can be written as:

y + 6 = (3/4)*(x + 4)

Learn more about lines at:

https://brainly.com/question/1884491

#SPJ1

So dw/dt by using appropriate chain rule is [tex]3e^t + 2e^-t.[/tex]

To find dw/dt, we can use the chain rule of differentiation:

dw/dt = dw/dx * dx/dt + dw/dy * dy/dt

First, we can find dw/dx and dw/dy using the product rule of differentiation:

dw/dx = [tex]y * d/dx(e^t) + x * d/dx(-e^-2t) = ye^t - xe^-2t[/tex]

dw/dy = [tex]x * d/dy(-e^-2t) + y * d/dy(xy) = -xe^-2t + x^2[/tex]

Next, we can substitute the given values of x and y to get w as a function of t:

w = xy =[tex]e^t * (-e^-2t) = -e^-t[/tex]

Finally, we can find dx/dt and dy/dt using the derivative of exponential functions:

dx/dt =[tex]d/dt(e^t) = e^t[/tex]

dy/dt = [tex]d/dt(-e^-2t) = 2e^-2t[/tex]

Substituting all these values into the chain rule expression, we get:

dw/dt =[tex](ye^t - xe^-2t) * e^t + (-xe^-2t + x^2) * 2e^-2t[/tex]

Substituting w = -e^-t, and x and y values, we get:

dw/dt = [tex](-(-e^-t)e^t - e^t(-e^-2t)) * e^t + (-e^t*e^-2t + (e^t)^2) * 2e^-2t[/tex]

Simplifying and grouping like terms, we get:

dw/dt = [tex]3e^t + 2e^-t[/tex]

Therefore, dw/dt =[tex]3e^t + 2e^-t.[/tex]

Learn more about chain rule

brainly.com/question/30117847

#SPJ11

The sample size increases, but the standard deviation may increase, decrease, or stay the same depending on the probability of success.

False.

The mean (or expected value) of a binomial distribution is given by the formula np, where n is the sample size and p is the probability of success. So as the sample size increases, the mean of the distribution increases proportionally, assuming the probability of success remains constant.

However, the standard deviation of a binomial distribution is given by the formula sqrt(np(1-p)). As the sample size increases, the standard deviation does not necessarily increase. In fact, it can decrease if the probability of success is small or large, and increase if the probability of success is close to 0.5. This is because the variance of the binomial distribution is given by np(1-p), which has a maximum value at p = 0.5. When the probability of success is close to 0 or 1, the variance decreases as the sample size increases because the outcome becomes more predictable. Conversely, when the probability of success is close to 0.5, the variance increases as the sample size increases because there is greater variability in the outcomes.

In summary, the mean of a binomial distribution always increases as the sample size increases, but the standard deviation may increase, decrease, or stay the same depending on the probability of success.

To learn more about proportionally, visit:

https://brainly.com/question/29126727

#SPJ11

The statement "If F and G are vector fields, then curl(F + G) = curl F + curl G" is true.

To explain why, let's consider the curl operation which follows the standard rules of vector calculus. The curl of a vector field is given by the cross product of the del (∇) operator and the vector field. For two vector fields F and G, the statement can be represented mathematically as:

curl(F + G) = curl F + curl G

Now, let's compute the curl of the sum of the vector fields (F + G):

curl(F + G) = ∇ × (F + G)

Using the distributive property of the cross product, we can distribute the del operator across the sum of the vector fields:

∇ × (F + G) = (∇ × F) + (∇ × G)

The left side of the equation represents the curl of the sum of vector fields (F + G), and the right side represents the sum of the individual curls of F and G:

curl(F + G) = curl F + curl G

Therefore, the statement is true, and the curl operation follows the linearity property in vector calculus.

Learn more about curl operation:https://brainly.com/question/29898018

#SPJ11

The magnitude of the magnetic flux through the circular ring is 3.741×10−4 Tm².

To find the magnitude of the magnetic flux through the circular ring, we can use the formula:

Φ = BA cosθ

where Φ is the magnetic flux, B is the magnetic field strength, A is the area of the ring, and θ is the angle between the magnetic field and the normal to the ring.

Given that the magnetic field strength is 8.5×10−2 T, the radius of the ring is 3.9 cm (or 0.039 m), and the angle between the magnetic field and the normal to the ring is 24∘, we can calculate the area of the ring:

A = πr²
A = π(0.039)²
A = 0.0048 m²

Substituting the values into the formula, we get:

Φ = (8.5×10−2)(0.0048)cos24∘
Φ = 3.741×10−4 Tm^2

Therefore, the magnitude of the magnetic flux through the circular ring is 3.741×10−4 Tm².

To learn more about magnetic flux here:

brainly.com/question/29447889#

#SPJ11

The best descriptiοn and example οf the null hypοthesis in a hypοthesis test is: "A statistical hypοthesis that there is nο difference between a parameter and a specific value, οr between twο parameters. Example: Hοu - 90"

The null hypοthesis is a statistical hypοthesis that states there is nο significant difference between twο grοups οr variables being cοmpared.

It is οften denοted as H₀ and is a statement that researchers assume tο be true until prοven οtherwise by empirical evidence.

Frοm the given οptiοns

The best descriptiοn and example οf the null hypοthesis in a hypοthesis test is: "A statistical hypοthesis that there is nο difference between a parameter and a specific value, οr between twο parameters. Example: Hοu - 90"

In a hypοthesis test, the null hypοthesis represents the default assumptiοn that there is nο significant difference between twο grοups, οr between a sample and a pοpulatiοn.

The example given, "H₀: μ = 90", represents a null hypοthesis where there is nο significant difference between a parameter (represented by the variable "Hοu") and a specific value (90).

This means that if the null hypοthesis is true, the parameter "H₀: μ" is equal tο 90 οr dοes nοt differ significantly frοm 90.

Hence,

The best descriptiοn and example οf the null hypοthesis in a hypοthesis test is: "A statistical hypοthesis that there is nο difference between a parameter and a specific value, οr between twο parameters. Example: Hοu - 90"

Learn more about Null hypothesis at

https://brainly.com/question/28920252

#SPJ1

Answer:

0+8=8

8+0=8

8-0=8

8-8=0

The probability that a randomly selected student spends at most 185 hours on the project is 1 (or 100%).

The mean of a gamma distribution with parameters a and ß is a/ß², so in this case, the mean is 50/3 = 16.67 hours.

The variance of a gamma distribution with parameters a and ß is a/ß², so in this case, the variance is 50/9 = 5.56 hours. Therefore, the standard deviation is the square root of the variance, which is approximately 2.36 hours.

We can convert X to a standard normal variable Z using the formula:

Z = (X - μ) / σ

where μ is the mean of X and σ is the standard deviation of X. Substituting in the values we calculated in Step 1, we get:

Z = (X - 16.67) / 2.36

To find the probability that a randomly selected student spends at most 185 hours on the project,

we need to find the corresponding Z-score for X = 185 and then find the area under the standard normal curve to the left of that Z-score.

Z = (185 - 16.67) / 2.36 = 69.53

Using a standard normal table or calculator, we can find that the area to the left of Z = 69.53 is essentially 1. Therefore, the approximate probability that a randomly selected student spends at most 185 hours on the project is 1 (or 100%).

This is because the gamma distribution with a large a is well approximated by a normal distribution, and so the probability of X being more than a few standard deviations away from the mean is extremely small.

Learn more about Probability

brainly.com/question/11234923

#SPJ11

Answer:

2.80

Step-by-step explanation:

35p = £0.35

8 × £0.35 = £2.80