Diagonal of cardboard=displacement to hole
√4²+4²4√2So displacement till edge
4√2/22√2Total distance
4√2+2√26√2ftFrom centre to hole displacement
2√2Which is an example of a way that
machines make work easier?
A. They spread a small force over a small
distance.
B. They spread a small force over a larger
distance.
C. They make the force exert all at once.
D. They increase the time it takes to do a task.
Answer:
C Thy make the force exert all at once
An object is placed 14.0 cm from a diverging lens. If a virtual image appears 10.0 cm from the lens on the
same side as the object, what is the focal length of the lens?
Use lens formula
1/f=1/v-1/u1/f=1/-10-1/141/f=-7-5/701/f=-12/70f=70/-12f=-5.8cmThe focal length of the lens is 5.8 cm.
To find the focal length, the given values are:
Image distance - 10 cm
Object distance - 14 cm
What is focal length and how it was calculated?The distance between the convex lens or a concave mirror and the focal point of a lens or mirror is called the focal length. This is the parallel line which meet at the distance from the lens or mirror.
1/Focal length = 1/Image distance + 1/Object distance ( cm )
1/f = 1/v-1/u
1/f = 1/-10-1/14
1/f = -7-5/70
1/f = -12/70
f = 70/-12
f = -5.8cm
The focal length of the lens is - 5.8 cm.
Learn more about Focal length,
https://brainly.com/question/16188698
#SPJ2
science not has only achievements but also challenges justify with an example
please help
a piece of wood of mass 40g and uniform cross-sectional area of 2cm^2 floats upright in water. calculate the length of the immersed part of the wood
The length of the immersed part of the wood is 0.2m.
What is density?The density is the ratio of the mass and the volume of the object. It is denoted by ρ.
ρ = mass/Volume = m/V
Volume = Area of cross-section A x height h
Given is a piece of wood of mass 40g =0.04kg and uniform cross-sectional area A= 2cm² =2x10⁻⁴ m² floats upright in water.
The density of water ,ρ = 1000 kg/m³
The density related to length of part immersed is
1000 = 0.04/ (2x10⁻⁴ x h)
h = 0.2m
Thus, the length of the immersed part of the wood is 0.2m.
Learn more about density.
https://brainly.com/question/9215083
#SPJ1
In Ancient Greece, athletes competing in the long jump used handheld weights called halteres to lengthen their jumps. You are a 78 kg history major on the track and field team and decide to try this strategy. You jump at 10.3 m/s, 22.8 degrees above the horizontal. At the peak of your jump you throw two 5.5 kg masses horizontally behind you such that their velocity is zero in the ground's reference frame. What distance do the halteres add to the jump in m
The halter add the distance to the jump in meters is 0.55 m.
What is projectile?When an object is thrown at an angle from the horizontal direction, the object is said to be in projectile motion. The object which follows the projectile motion is called the projectile.
The magnitude of velocity u =10.3 m/s, angle of jumping θ = 22.8 degrees.
Components of velocity in x and y direction are
Vx = 10.3 cos 22.8 = 9.5 m/s
Vy = 10.3 sin 22.8 = 4 m/s
Maximum Range of athlete achieved using halter is given by
R = u²sin2θ /g
where, u = initial velocity, θ is the angle of projection and g is the gravitational acceleration.
Substituting the values, we get
R = (10.3)² sin(2 x 22.8 °) / 2 x 9.81
R = 7.75m
At the peak of jump you throw two 5.5 kg masses horizontally behind you such that their velocity is zero in the ground's reference frame.
The momentum is conserved in this situation,
(M+2m)Vxo =MVx'
Vx' = (M+2m)/M x Vxo'
Change in x component of velocity ΔVx = Vx' -Vxo
Vxo = 2m/M x Vx
Vxo = 2 x 5.5 /78 x 9.5
Vxo = 1.34 s
Maximum height gained when final velocity is zero
Vy = 0 = Vyo -gt
time t = Vyo/g = 4/9.8 = 0.41s'
Increase in range by using of halters is
ΔR = ΔVx' x t
ΔR = 1.34 x 0.41
ΔR =0.55m
Thus, the halter add the distance to the jump in meters is 0.55 m.
Learn more about projectile.
https://brainly.com/question/11422992
#SPJ1
the yacht shown below has a mass of 8300kg. for land transportation,the yacht is secured on a trailer. each tyre on the trailer can support upto a maximum of 7000N . what is the least number of tyres the trailer should have to support the yacht adequately
1 kg = 9.81N
8300 kg x 9.81 = 81,423N
81,423 / 7000 = 11.63 tires.
The least amount of tires would be 12
Which statement best defines the relationship between work and energy?
Work can transfer energy between objects and increase radiant energy.
Work can transfer energy between objects and cause a change in the form of energy.
Work can transfer energy between objects and decrease nuclear energy.
Work can transfer energy between objects and cause a change in the amount of total energy.
The relationship between work and energy is that work can transfer energy between objects and cause a change in the form of energy.
What is energy?Energy is simply defined as the ability to do work.
Energy possessed by any object or matter enables it to do work of various forms.
Energy can be transferred from one object to another. Also, energy can be transformed into various forms.
Therefore, the relationship between work and energy is that work can transfer energy between objects and cause a change in the form of energy.
Learn more about energy and work at: https://brainly.com/question/13881533
#SPJ1
Describe how you come in direct contact with at least 5 of the 7 areas of the electromagnetic spectrum each day.
One come in direct contact with micro, radio, radar, infrared and visible waves.
What is electromagnetic spectrum?The electromagnetic spectrum consists of the range of all types of EM radiation. Radiation is packet of energy that travels and spreads out. It has radio waves, infrared waves and visible light waves, ultraviolet rays and microwaves.
They possess high energy even to penetrate deep within the material. electromagnetic spectrum has longer wavelength and less frequency.
Everyday life is completed by artificially made electromagnetic radiation:
Daily food is heated in microwave ovens using micro waves.The airplanes are guided by radar waves,The televisions receive radio waves transmitted by broadcasting stations, and infrared waves used by heaters provide heat.Thus, we come in direct contact of the waves in electromagnetic spectrum.
Learn more about electromagnetic spectrum.
https://brainly.com/question/23727978
#SPJ1
What can be described as a technology that uses high-frequency sound waves to create images
Answer:
Ultrasound imaging.
Explanation:
It uses high-frequency sound waves to view inside the body.
A boy is trying to roll a bowling ball up a hill, as shown in the image below. If
friction is ignored, what is the minimum initial velocity that the ball must have
for it to reach the top of the hill? (Recall that g = 9.8 m/s²)
22.5 m
O A. 28 m/s
O B. 7 m/s
OC. 14 m/s
OD. 21 m/s
The minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s. The correct option is D.
What is mechanical energy?The mechanical energy is the sum of kinetic energy and the potential energy of an object at any instant of time.
M.E = KE +PE
A boy is trying to roll a bowling ball up a hill. The friction is ignored. The ball must have to reach the top of the hill with a velocity. The acceleration due to gravity, g = 9.8 m/s²
The conservation of energy principle states that total mechanical energy remains conserved in all situations where there is no external force acting on the system.
M.E bottom of hill = M.E on top of hill
Kinetic energy + Potential energy = Kinetic energy + Potential energy
1/2 mu² + 0 = 0 + mgh
At the top of hill, the velocity will become zero. So, final kinetic energy is zero.
Substituting the values, we have
1/2 x u² = 9.8 x 22.5
u = sqrt [2 x9.8 x 22.5 ]
u= 21 m/s
Thus, the minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s.
Learn more about mechanical energy.
https://brainly.com/question/13552918
#SPJ1
The electromagnetic waves with the longest wavelength are: *
-microwaves
-gamma rays
-radio waves
-visible light
Answer:
Radio waves
Explanation:
I hope it helps u dear^_^
[tex] \huge \tt \color{pink}{A}\color{blue}{n}\color{red}{s}\color{green}{w}\color{grey}{e}\color{purple}{r }[/tex]
electromagnetic waves :- electromagnetic radiation▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂
[tex]\large\underline{ \boxed{ \sf{✰\:Radio\:waves }}}[/tex]
▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂
The electromagnetic waves with the longest wavelength are radio waves .
Example:- television, mobile phones and radios.========================
Hope it helps!
pls help me i really need help
Graphs A, B, C, and D match the numbers 3,4,1, and 2 respectively.
What is the distance?Distance is a numerical representation of the distance between two objects or locations.
The distance can refer to a physical length or an estimate based on other factors in physics or common use. |AB| is a symbol for the distance between two points A and B.
Graph C shows a person leaving home and traveling at a constant speed.
Graph D shows a person leaving home, traveling at a constant speed, stopping for a short time and then returning home.
Graph A shows a person leaving home, traveling to their destination, and immediately returning.
Graph B shows a person leaving home, traveling at a constant speed, stopping for some time, and then continuing the journey away from home.
Hence, the numbers 3, 4, 1, and 2 are matched by graphs A, B, C, and D, respectively.
To learn more about the distance refer to the link;
https://brainly.com/question/26711747
#SPJ1
Which of the following statements is true about transverse waves?
A: They always have the same frequency.
B: They always have the same velocity.
C: They always have the same wavelengths
D:The particles vibrate in a parrallel direction with respect to the wave motion.
E: The particles vibrate in a perpendicular direction with respect to the wave motion
Answer:
The answer is option E
Explanation:
The particles vibrate in a perpendicular direction with respect to the wave motion
A swimmer swims 20 m in 40 s. The swimmer's average speed is
------------- m/s.
Explanation:
Average speed=distance/time
=20/40
=0.5m/s
A 6kg block starts from rest against a spring with a spring constant of 500N/m that is compressed by a distance of 2m. The ground is frictionless. What will be the velocity of the block leaving the spring?
The velocity of the block leaving the spring is determined as 18.26 m/s.
Velocity of the block
The velocity of the block leaving the spring is calculated from the principle of conservation of energy.
K.E = Ux
¹/₂mv² = ¹/₂kx²
v² = kx²/m
v² = (500 x 2²)/6
v² = 333.33
v = √333.33
v = 18.26 m/s
Thus, the velocity of the block leaving the spring is determined as 18.26 m/s.
Learn more about velocity here: https://brainly.com/question/4931057
#SPJ1
Action and reaction forces are described by which of Newton’s laws of motion?
first
second
third
fourth
Answer:
third
Explanation:
for every action there is an equal and opposite reaction
example
bouncing ball
ball receives a force from the ground due to collision
that same force causes the ball to bounce off the ground
first law:
inertia
example
stuff in space doesn't move unless its pushed
then it keeps going unless something stops it
second law
force = mass times acceleration
example
harder you push a cart the faster it goes
the less a cart weighs the faster a cart goes
studysmarterus
spacecenterorg
energywavetheory
A 50 Q resistor in a circuit has a current flowing through it of 2.0 A. What is
the power dissipated by the resistor? (Use P-OVI = PR=
SA
A. 100 W
B. 200 W
OC. 50 W
OD. 25 W
Hello!
We can use the following equation for calculating power dissipated by a resistor:
[tex]P = i^2R[/tex]
P = Power (? W)
i = Current through resistor (2.0 A)
R = Resistance of resistor (50Ω)
Plug in the known values and solve.
[tex]P = (2.0^2)(50) = \boxed{\text{ B. }200 W}[/tex]
help please number 23 photo down below
The value of a is 5, the value of b is 5/2 if the triangle is a right angle triangle option (B) is correct.
What is the trigonometric ratio?The trigonometric ratio is defined as the ratio of the pair of a right-angled triangle.
From the tan ratios:
[tex]\rm tan30 = \dfrac{b}{\dfrac{5\sqrt{3}}{2} }[/tex]
[tex]\rm \dfrac{1}{\sqrt{3} } = \dfrac{b}{\dfrac{5\sqrt{3}}{2} }[/tex]
b = 5/2
From the cos ratio:
[tex]\rm cos30 = \dfrac {\dfrac{5\sqrt{3}}{2}}{a}[/tex]
[tex]\rm \dfrac{\sqrt{3}}{2}= \dfrac {\dfrac{5\sqrt{3}}{2}}{a}[/tex]
a = 5
Thus, the value of a is 5, the value of b is 5/2 if the triangle is a right angle triangle option (B) is correct.
Learn more about trigonometry here:
brainly.com/question/26719838
#SPJ1
Open the attached file. It shows 2 waves (a blue one and an orange one) that are moving through the same medium at the same time. Your challenge is to DRAW the RESULTANT wave and LABEL the areas of interference with CI, DI and/or points of TDI.
The diagram is labelled to DRAW the RESULTANT wave and LABEL the areas of interference with CI, DI and/or points of TDI.
What is refraction?When a light ray falls on the interface of two medium like air and water, then the portion of light is reflected and another portion of the light is refracted into the water medium. The angle of incidence is equal to the angle of reflection but the angle of incidence is larger then the angle of refraction.
Open the attached file. It shows 2 waves (a blue one and an orange one) that are moving through the same medium at the same time.
Thus, the diagram is labelled.
Learn more about refraction.
https://brainly.com/question/14760207
#SPJ1
what is the acceleration of the train
Answer:
a=1.94 ms−2. is acceleration of the train
Lab: newton's laws of motion assignment: lab report
Newton's motion laws state that if an object is at rest or in movement, it will tend to maintain its basal state.
What are Newton's motion laws?Newton's motion laws are a set of scientific statements aimed at explaining the physical property of movement.
These laws explain why objects in movement tend to maintain the same velocity for a short period of time.
In conclusion, Newton's motion laws state that if an object is at rest or in movement, it will tend to maintain its basal state.
Learn more about Newton's motion laws here:
https://brainly.com/question/10454047
#SPJ1
BRAINLIEST + 19 pts what does a capacitor do in a circuit?
A. it reduces current.
B. It increases voltage
C. It stores and releases charge.
D. it overcomes resistance
answer: c
explanation: it's job is to store and release charge
Answer:
C- It stores and releases charge
it is a routine composed of yells and cheers gymnastic skill and dance
Cheer dance is a routine composed of yells and cheers gymnastic skill and dance.
What is cheer dance?Cheer dance or cheerleading is a group activity used to entertain fans at athletic events and inspire louder, more enthusiastic cheering. It combines dancing and acrobatic aspects with shouted phrases.
A never-ending range of diverse stunts, jumps, pyramids, dances, and chants that integrate a variety of different movements can be included in the immensely complex sport of cheerleading. Base, partner, and spotter are the three primary cheerleading roles. These roles are all a part of cheerleading stunts, which pose the greatest risk of harm to participants.
It is a competitive sport and leisure activity made up of a set routine with necessary performance components, much like in gymnastics and dance. Additionally, it hopes to get the crowds to cheer in team sports event.
Learn more about cheer dance, refer the link:
https://brainly.com/question/29788167
#SPJ2
Your question is incomplete, but most probably your full question was:
1. It is a routine composed of yells and cheers, gymnastic skills and dance.
A. Contemporary dance
B. Hip-hop dance
C. Street dance
D. Cheer dance
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. which of these tools should she use for this purpose? an electronic balance a stopwatch a barometer a graduated cylinder
Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
What is a stopwatch?Watch that, when turned on and off, measures the amount of time that has passed since a specific time.
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. Stopwatch is the tool she should utilize for this purpose.
Hence, option B is correct.
To learn more about the stopwatch refer;
https://brainly.com/question/13758413
#SPJ1
Answer: Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
option b
Explanation:
What's manifestation
Answer:
Explanation:
the action or fact of showing an abstract idea.
(◑.◑)!
Manifestation (or manifesting) refers to
various pseudoscientific self-help
strategies intended to burning about
a personal goal, primary by focusing
one's thought upon the desired outcome.
The techniques are based on the law
of attraction of New Thought spiritually.
While the process involves positive
thinking, or even directing request to
"the universe", it also involves
action-steps on the part of the individual.
Manifestation has been criticised as
having no basis in physical science.
Alison Bernstein, a professor of
translational neuroscience at Michigan
State University said in an interview
with Vice that "You can't magically
make things happen. You can [However]
change the way you react to certain
situations, which sounds to me like
Cognitive Behavioral Therapy". She
want no to assert that "manifestation
is not supported by science.
A roller coaster is traveling at 13 m/s when it approaches a hill that is 400 m long. Heading down the hill, it accelerates at 4.0 m/s2. What is the final velocity of the roller coaster? Round your answer to the nearest whole number.
what term refers to the limited air transfer that takes place once the station has been launched?
A: closed environment
B: exposed environment
C: secure environment
D: open environment
Closed environment refers to the limited air transfer that takes place once the station has been launched.
What is a Closed environment?
This is an environment which has little or no interference with the atmosphere.
Launching of station in a closed environment will help prevent damages done as a result of exposure to radiations etc.
Read more about Environment here https://brainly.com/question/17413226
#SPJ1
Suppose a=3i-2j+k b=-i-4j+3k and c is avector lying along positive x axis with the property that a(b+c)=0 then find c?
The value of the c will be (0 i+0 j+0 k). c is a vector that is along the positive x-axis and has the condition a(b+c)=0.
What is a vector?A vector is a quantity or phenomena with magnitude and direction that are independent of one another. The phrase also refers to a quantity's mathematical or geometrical representation.
Given ;
a=3i-2j+k
b=-i-4j+3k
Given property:
a(b+c)=0
-i-4j+3k ((-i-4j+3k)+c)=0
(3+8+3)(-i-4j+3k)c=0
14(-i-4j+3k)c=0
c=0 i+0 j+0 k
Hence, the value of the c will be (0 i+0 j+0 k).
To learn more about the vector refer to the link;
https://brainly.com/question/13322477
#SPJ1
4. Describe the process of fusion in the sun.
Answer:
In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.
Answer:
Hydrogen in the middle of the sun is being converted into helium. This helium that was just converted from hydrogen (air as we know it) is now called Nuclear Fusion.
Explanation:
Which describes the type of acceleration in the graph?
Answer:
Constant positive acceleration
Explanation: