A battery has emf 25.0 V and internal resistance T . A 9.00 resistor is connected t0 the terminals of the battery, and the voltage drop across the resistor is 23.0 V_ Part A What is the internal resistance of the battery? Express your answer with the appropriate units

Hi! To simply express the relationship between the angular velocities of a pair of coupled gears, you can use the gear ratio. The gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear. The relationship between the angular velocities (ω1 and ω2) of the two gears can be expressed as follows:

ω1 / ω2 = T2 / T1

Where ω1 is the angular velocity of the driving gear, ω2 is the angular velocity of the driven gear, T1 is the number of teeth on the driving gear, and T2 is the number of teeth on the driven gear.

Learn more about angular velocities: https://brainly.com/question/6860269

#SPJ11

To design a beam for a simple span, we need to consider the following criteria: strength, deflection, and shear. We will use the Load and Resistance Factor Design (LRFD) and Allowable Stress Design (ASD).

Determine the loads on the beam:

Total working uniform load = WD + w1 = 1.25 k/ft + 3.0 k/ft = 4.25 k/ft

Total load on the beam = 4.25 k/ft x 24 ft = 102 kips

Determine the maximum moment:

M max = (w1 * L^2) / 8 = (3.0 k/ft * 24 ft^2) / 8 = 27.0 kip-ft

Determine the maximum shear:

Vmax = w1 * L / 2 = 3.0 k/ft * 24 ft / 2 = 36.0 kips

Determine the allowable stress:

Using 50 ksi steel, the allowable stress is:

Fb = 0.66Fy = 0.66(50 ksi) = 33 ksi

Determine the moment of inertia: Assume a W shape beam. From the AISC Steel Manual, the section modulus for a W24x62 beam is 62.4 in^3. The moment of inertia is:

I = S / y = 62.4 in^3 / 11.75 in = 5.31 in^4

Check deflection:

The maximum allowable deflection is 1/360 of the span:

δmax = L / 360 = 24 ft / 360 = 0.067 ft

The deflection of the beam can be calculated using:

δ = (5 * w1 * L^4) / (384 * E * I) + (5 * WD * L^4) / (384 * E * I)

where E is the modulus of elasticity (29,000 ksi for steel).

Plugging in the values, we get:

δ = (5 * 3.0 k/ft * (24 ft)^4) / (384 * 29,000 ksi * 5.31 in^4) + (5 * 1.25 k/ft * (24 ft)^4) / (384 * 29,000 ksi * 5.31 in^4) = 0.018 ft

Since the calculated deflection is less than the maximum allowable deflection, the beam is acceptable.

Check shear:

The shear stress can be calculated using:

τ = V / (t * d)

where t is the thickness of the flange and d is the depth of the beam.

Assuming a W24x62 beam with t = 0.56 in and d = 24.97 in, we get:

τ = 36.0 kips / (0.56 in * 24.97 in) = 0.026 ksi

Since the calculated shear stress is less than the allowable stress of 0.4Fy = 0.4(50 ksi) = 20 ksi, the beam is acceptable.

Determine the LRFD and ASD load resistance factors:

Using the AISC Steel Manual, the LRFD load resistance factor for bending is 1.2 and the ASD load resistance factor for bending is 1.5. The LRFD load resistance factor for shear is 1.4 and the ASD load resistance factor for shear is 1.5.

Determine the LRFD and ASD nominal moment and shear capacities:

The nominal moment capacity of the W24x62

Learn more about load resistance here:

https://brainly.com/question/13251472

#SPJ11

The statement "Like function ‘fork’ in the process API, function ‘pthread_create’ creates a clone of the current thread" is True (A). The C fork() function is a primary method of process creation of an operating system like Unix.

The fork() is used for creating a new copy of the calling function. The newly created process is known as the Child process and the process from which the child process is created is known as the parent process. The C library defines fork(). It is the UNIX/Linux-specific system that calls to create a process, on Linux, etc. so when you do if(!fork()) it means definitely child process because! 0 == 1 i.e. if the condition is true and it will execute the statements inside the if(!fork()). A thread is a basic unit of execution of any process. A program comprises many processes and all the processes comprise much simpler units known as threads. So, the thread can be referred to as the basic unit of a process or it is the simpler unit that tother makes the CPU utilization. The fork is nothing but a new process that looks exactly like the old or the parent process but still, it is a different process with a different process ID and its own memory. Threads are lightweight processes that have less overhead. In computer programming, a thread is placeholder information associated with a single use of a program that can handle multiple concurrent users. From the program's point-of-view, a thread is an information needed to serve one individual user or a particular service request.The function 'fork' is used to create a new process, whereas 'pthread_create' is used to create a new thread within the same process. Both functions result in the creation of a clone of the current thread or process.

Learn more about the thread: https://brainly.com/question/31565584

#SPJ11

Hi!

The default size of the array returned from the OFFSET function if the optional height and width arguments are not provided is: a. a cell.

When height and width are not specified, OFFSET returns a single cell by default as size.

Learn more about default size: https://brainly.com/question/17203075

#SPJ11

Hi!

The default size of the array returned from the OFFSET function if the optional height and width arguments are not provided is: a. a cell.

When height and width are not specified, OFFSET returns a single cell by default as size.

Learn more about default size: https://brainly.com/question/17203075

#SPJ11

To determine the temperature profile in the plate, we need to consider both natural convection and thermal radiation exchange. The equation for convection heat transfer is given by:

q_conv = h*A*(T_s - T_air)

Where q_conv is the heat transfer rate by convection, h is the convection heat transfer coefficient, A is the surface area of the plate, T_s is the surface temperature of the plate, and T_air is the air temperature.

The equation for thermal radiation exchange is given by:

q_rad = ε*σ*A*(T_s^4 - T_sur^4)

Where q_rad is the heat transfer rate by thermal radiation, ε is the emissivity of the plate surface and the bolts, σ is the Stefan-Boltzmann constant, T_s is the surface temperature of the plate, and T_sur is the surrounding surface temperature.

Since the bottom surface of the plate is fully insulated, we can assume that the heat transfer rate by conduction is negligible. Therefore, the heat transfer rate by convection and thermal radiation must be equal:

q_conv = q_rad

Substituting the given values, we get:

2*A*(T_s - 50) = 0.3*5.67E-8*A*(T_s^4 - 200^4)

Simplifying and solving for T_s, we get:

T_s = 146.9°C

Therefore, the temperature profile in the plate varies from 50°C at the top surface to 146.9°C at the bottom surface.
The maximum use temperature of B21 bolts according to the ASME Code for Process Piping is 149°C. Since the temperature at the bottom surface of the plate exceeds this limit, the ASTM B21 bolts on the plate do not comply with the ASME code.

To keep the plate temperature below the maximum use temperature of B21 bolts, we can use bolts made of a material with a higher maximum use temperature, such as ASTM A193 Grade B16 with a maximum use temperature of 593°C. Alternatively, we can reduce the surface temperature of the plate by using insulation on the top surface or increasing the convection heat transfer coefficient by increasing the air flow around the plate.

To know more about the  temperature profile in the plate, please visit:

https://brainly.com/question/14178663

#SPJ11

The grammar provided is ambiguous because it allows for multiple interpretations or meanings.

An ambiguous grammar is one that allows more than one parse tree for some input string. The grammar consisting of the following production rules, is ambiguous:

1. S → A | B | C
2. A → + | * | ( )
3. B → A | C
4. C → B | A

We can prove that the grammar is ambiguous by finding an example input string that can be derived in two different ways. Consider the input string "+". We can derive this string in two different ways, as shown below:

Derivation 1:
1. S → A (by rule 1)
2. A → + (by rule 2)

Derivation 2:
1. S → B (by rule 1)
2. B → A (by rule 3)
3. A → + (by rule 2)

These two different derivations for the same input string show that the grammar is ambiguous, as it allows more than one parse tree for the input string "+".

Learn more about the ambiguity, visit:  https://brainly.com/question/1114764

#SPJ11

A farmer who needs to use a heavy-duty diesel truck that is capable of transporting heavy materials would choose a truck with option D: hemispherical design combustion engine.

The hemispherical design, also known as a Hemi motor, is a type of within explosion engine place the explosion chamber is formed like a half-covering or one of two equal parts of a whole. This design allows for better light wind and fuel joining, that leads to better fuel efficiency and raised capacity crop.

Hemi engines are usually secondhand in heavy-duty engine trucks and additional big vehicles that demand plenty capacity to operate, making bureaucracy a standard choice for farmers etc.

Learn more about combustion engine from

https://brainly.com/question/831466

#SPJ1

The best way to parenthesize the given expression is (a*(10*20))*(b*(20*50))*(c*(50*1))*(d*(1*100)). This involves multiplying the matrices in the order they are given, from left to right, and ensures that the dimensions match up correctly for each multiplication.

Multiplying the matrices in the order they are given, from left to right, and ensures that the dimensions match up correctly for each multiplication.The best parenthesization for the design given expression a(10*20)*b(20*50)*c(50*1)*d(1*100) would be to first calculate a(10*20) * c(50*1), then multiply the result by b(20*50) * d(1*100). This minimizes the total number of scalar multiplications, reducing computational complexity.

Your expression: (a(10*20)*c(50*1)) * (b(20*50)*d(1*100))

To know more about design please refer:

https://brainly.com/question/17147499

#SPJ11

The common-mode gain of the amplifier is -6.02 dB.

To find the common-mode gain of the amplifier in dB, we can use the formula:
Common-mode gain = Differential mode gain / CMRR
Substituting the given values, we get:

Common-mode gain = 40 dB / 80 dB
Common-mode gain = 0.5
Converting to decibels, we use the formula:
Common-mode gain (dB) = 20 log (Common-mode gain)
Substituting the value, we get:
Common-mode gain (dB) = 20 log (0.5)
Common-mode gain (dB) = -6.02 dB
Therefore, the common-mode gain of the amplifier is -6.02 dB.

To know more about  the amplifier, please visit:

https://brainly.com/question/30444175

#SPJ11

(a) Radiation Resistance is 0.199 Ω.  (b) Radiation Efficiency is  60.3% and (c) Maximum electric field intensity is  resistance, and the maximum electric field intensity at a distance of 20 km is approximately

(a) The radiation resistance (Rr) of an antenna is given by the formula:

Rr = (2 * π^2 * f^2 * L^2 * μ0) / 3

where f is the frequency of the current, L is the length of the antenna, and μ0 is the permeability of free space.

Given:

f = 1 MHz = 10^6 Hz

L = 15 m

μ0 = 4π × 10^-7 H/m

Substituting these values, we get:

Rr = (2 * π^2 * (10^6 Hz)^2 * (15 m)^2 * 4π × 10^-7 H/m) / 3

= 0.199 Ω

Therefore, the radiation resistance of the antenna is 0.199 Ω.

(b) Radiation efficiency:

The radiation efficiency (η) of an antenna is given by the formula:

η = Rr / (Rr + Rl)

where Rl is the loss resistance of the antenna.

Given:

Rr = 0.199 Ω

P = 1.6 kW

The radiated power (P) is related to the radiation resistance by the formula:

P = (I^2 * Rr) / 2

where I is the current in the antenna.

Solving for I, we get:

I = √((2 * P) / Rr) = √((2 * 1600 W) / 0.199 Ω) = 201 A

The loss resistance (Rl) of the antenna can be calculated as:

Rl = (2 * π * f * L) / (σ * A)

where σ is the conductivity of copper and A is the cross-sectional area of the wire.

Given:

σ = 5.8 × 10^7 S/m

A = π * (0.02 m)^2 = 1.2566 × 10^-3 m^2

Substituting these values, we get:

Rl = (2 * π * 10^6 Hz * 15 m) / (5.8 × 10^7 S/m * 1.2566 × 10^-3 m^2)

= 0.131 Ω

Substituting Rr and Rl into the formula for radiation efficiency, we get:

η = 0.199 Ω / (0.199 Ω + 0.131 Ω)

= 0.603 or 60.3%

Therefore, the radiation efficiency of the antenna is 60.3%.

(c) Maximum Electric Field Intensity: To calculate the maximum electric field intensity (E_max) at a distance of 20 km (20,000 m), we can use the following formula:

E_max = √(30 × P / R)

where P is the radiated power (1.6 kW or 1600 W) and R is the distance (20,000 m). Plugging in the values, we get:

E_max = √(30 × 1600 / 20,000) ≈ 0.03086 V/m

Learn more about  electromagnetics and electrical engineering: https://brainly.com/question/13874687

#SPJ11

That statement is actually not entirely accurate.

While it is true that desalination is a theoretically attractive method for obtaining fresh water from seawater, there are actually quite a few large commercial facilities for desalination that exist around the world. In fact, as demand for fresh water continues to grow in many regions, more and more countries are turning to desalination as a way to meet their water needs.

That being said, there are certainly still many areas where desalination is not yet widely used, and where access to fresh water remains a major challenge. But overall, it is important to recognize that desalination is a technology that has already been widely implemented in many parts of the world, and that has the potential to play an increasingly important role in meeting our future water needs.

Though desalination is a theoretically attractive method for obtaining fresh water from seawater, no large commercial facilities for desalination exist, mainly due to the high costs and energy requirements associated with the process. To address this issue, further research and development are needed to improve the efficiency and affordability of desalination technologies, making them a more viable option for large-scale implementation in the future.

Learn more about commercial facilities  at: brainly.com/question/28257907

#SPJ11

A context-free grammar for a*b can be represented as S → ε | aS | bS.

A context-free grammar (CFG) is a formal grammar in which each production rule is of the form A → α, where A is a nonterminal symbol and α is a string of terminals and/or nonterminals. In the case of a*b, we can define a CFG as follows:                                                                                                 S → ε | aS | bS                                                                                                              Here, S is the start symbol and ε represents the empty string. The first production rule allows for the possibility of an empty string (i.e., no a's or b's). The second and third production rules allow for the repetition of a's and b's, respectively. Since there are no restrictions on the number of a's and b's that can appear in the string, this CFG generates all possible strings consisting of zero or more a's followed by zero or more b's.                       In summary, the CFG S → ε | aS | bS generates the language a*b, which consists of all possible strings consisting of zero or more a's followed by zero or more b's.

For more questions like Symbol click the link below: https://brainly.com/question/13868256                                                         #SPJ11

True

The measurement of total current is accomplished with the ammeter connected in series with the source voltage. This allows the ammeter to measure the current flowing through the circuit. When measuring current on circuits with voltage values greater than 30 V or where “breaking” the circuit is impractical or dangerous, a clamp-on ammeter or amprobe can be used. These ammeters have two spring-loaded expandable jaws that allow you to clamp around a single conductor

To know more about the measurement of total current, please visit:

https://brainly.com/question/61398

#SPJ11

To solve this problem, we can use the ideal gas law and the principle of conservation of energy. We can also use the concept of entropy to calculate the entropy generated during the process.

(a) To determine the final pressure in the tank, we can use the ideal gas law:

P1V1 = m1RT1 and P2V2 = m2RT2

where P is the pressure, V is the volume, m is the mass, R is the gas constant, and T is the temperature. Since the two gases form a homogeneous mixture, we can assume that the final pressure in the tank is the same as the pressure in the uninsulated tank, which is 500 kPa. Therefore, we can use the ideal gas law to find the volume of the mixture in the uninsulated tank:

P2V2 = m2RT2

V2 = (m2RT2) / P2

where m2 is the mass of Nz in the uninsulated tank, which we can find using the ideal gas law:

P2V2 = m2RT2

m2 = (P2V2) / (RT2)

Substituting the given values, we get:

m2 = (500 kPa * 2 m³) / [(8.314 J/(mol·K)) * (323 K)]

m2 = 3.014 kg

Now we can use the principle of conservation of mass to find the mass of Oz in the insulated tank that mixes with the Nz in the uninsulated tank. Since the total mass of the mixture is 4 kg (1 kg of Oz and 3.014 kg of Nz), we have:

m1 + m2 = 4 kg

m1 = 4 kg - m2

m1 = 0.986 kg

Using the ideal gas law for Oz in the insulated tank, we can find the initial volume of Oz:

P1V1 = m1RT1

V1 = (m1RT1) / P1

Substituting the given values, we get:

V1 = (0.986 kg * 8.314 J/(mol·K) * (15°C + 273.15)) / (300 kPa)

V1 = 0.0423 m³

Now we can use the total volume of the mixture and the volumes of the individual gases to find the final pressure:

V1 + V2 = 2 m³

P = (m1RT + m2RT) / (V1 + V2)

Substituting the given values, we get:

P = [(0.986 kg * 8.314 J/(mol·K) * (15°C + 273.15)) + (3.014 kg * 8.314 J/(mol·K) * (50°C + 273.15))] / (0.0423 m³ + 2 m³)

P = 395.9 kPa

Therefore, the final pressure in the tank is 395.9 kPa.

(b) To determine the heat transfer during the process, we can use the principle of conservation of energy. Since the process is adiabatic (i.e., there is no heat transfer to or from the surroundings), the total energy of the system (which includes the two tanks and the gas mixture) is conserved. Therefore, the change in the total energy is equal to zero:

ΔU = 0

where ΔU is the change in internal energy.

We can express the internal energy of a gas using the following equation:

U = 3/2 * n * R * T

where n is the number of moles of gas.

Learn more about homogeneous mixture here:

https://brainly.com/question/24898889

#SPJ11

The alarm will sound approximately 20.79 seconds after the sudden pressure change at 1:30 PM.

The transfer function given relates the measured value Pm to the actual pressure P. In this case, the alarm will sound if Pm exceeds 45 psi. Therefore, we need to determine how long it takes for Pm to reach 45 psi after the sudden change in pressure from 35 to 50 psi.
Using the given transfer function, we can calculate the time constant as 30 seconds. This means that the time it takes for the measured value to reach 63.2% of the actual pressure change is 30 seconds.
To determine the time it takes for Pm to reach 45 psi, we can use the following formula:
Pm(t) = P + (Pm(0) - P)[1 - e^(-t/tau)]
where Pm(0) is the initial value of Pm (35 psi), tau is the time constant (30 seconds), and t is the time elapsed since the sudden pressure change.
Plugging in the given values, we get:
45 = 50 + (35 - 50)[1 - e^(-t/30)]
Simplifying this equation, we get:
e^(-t/30) = 0.5
Taking the natural logarithm of both sides, we get:
-t/30 = ln(0.5)
Solving for t, we get:
t = -30 * ln(0.5)
Using a calculator, we get:
t ≈ 20.79 seconds
Therefore, the alarm will sound approximately 20.79 seconds after the sudden pressure change at 1:30 PM.

Learn more about "pressure " at: https://brainly.com/question/18882857

#SPJ11

The smallest force P that must be applied in order to cause the 150-lb uniform crate to move is 225 lbs.

To determine the smallest force P that must be applied in order to cause the 150-lb uniform crate to move, we need to use the formula:

P = Ff + Fg

Where P is the force we need to apply, Ff is the force of friction, and Fg is the force of gravity. Since the crate is on a flat surface, we can assume that the force of gravity is equal to the weight of the crate, which is 150 lbs.

The coefficient of static friction between the crate and the floor is given as ms = 0.5. We can use this coefficient to calculate the force of friction:

Ff = ms * Fn

Where Fn is the normal force, which is equal to the weight of the crate. So, Fn = 150 lbs.

Ff = 0.5 * 150 lbs = 75 lbs

Now we can plug in the values for Ff and Fg into the formula for P:

P = Ff + Fg
P = 75 lbs + 150 lbs
P = 225 lbs

Therefore, the smallest force P that must be applied in order to cause the 150-lb uniform crate to move is 225 lbs.

Learn more about force here:-

https://brainly.com/question/13191643

#SPJ11

The mass flow rate of steam is approximately 4.51 kg/s.

To determine the mass flow rate of steam, we need to use the mass conservation equation, which is given as:

mass flow rate = density x area x velocity

We can find the density of steam using the steam tables, which give us the density at a given pressure and temperature. For the given conditions, the density of steam is approximately 11.9 kg/m^3.

The area of the pipe can be calculated using the formula for the area of a circle:

area = pi x (diameter/2)^2

Substituting the given values, we get:

area = pi x (1.6/2)^2 = 2.01 x 10^-3 m^2

Finally, we can calculate the mass flow rate as:

mass flow rate = density x area x velocity

mass flow rate = 11.9 kg/m^3 x 2.01 x 10^-3 m^2 x 150 m/s

mass flow rate = 4.51 kg/s

Therefore, the mass flow rate of steam is approximately 4.51 kg/s

Learn more about mass flow rate

brainly.com/question/30763861

#SPJ11

The impulse response of the system is g(t) = -10e^(-t) sin(21t - 30°) + 210e^(-t) cos(21t - 30°) + 5δ(t).

To determine the impulse response of the system with the given step response h(t) = 5 + 10e^(-t) sin(21t - 30°), we will use the provided equation g(t) = dh(t)/dt + h(0+)δ(t).

First, let's find the derivative of h(t) with respect to t:
dh(t)/dt = -10e^(-t) sin(21t - 30°) + 210e^(-t) cos(21t - 30°).

Next, let's find h(0+):
h(0+) = 5 + 10e^(0) sin(0 - 30°) = 5.

Now, we can plug these results into the equation for g(t):
g(t) = (-10e^(-t) sin(21t - 30°) + 210e^(-t) cos(21t - 30°)) + 5δ(t).

Learn More about impulse here :-

https://brainly.com/question/30466819

#SPJ11

To determine the velocity of piston C, we need to use the concept of instantaneous center of zero velocity.

At the instant shown, point B is the instantaneous center of zero velocity for the connecting rod BC. Therefore, the velocity of point C is perpendicular to line BC and passes through point B.

Let's draw a diagram to better visualize the problem:

     A (50mm)

     o

      \

       \

        \

         o B (-175mm)

           \

            \

             \

              o C (50mm)

From the given information, we know that the angular velocity of crank AB is 2000 RPM. Let's convert this to radians per second:

2000 RPM * (2π radians/revolution) * (1/60 seconds/minute) = 209.44 radians/second

The velocity of point B is equal to the velocity of point A, which is perpendicular to line AB and passes through point A. The velocity of point A can be calculated as:

VA = ω * rA

where ω is the angular velocity in radians per second and rA is the distance from point A to the center of rotation (which is point O in this case). Since rA = 50mm, we have:

VA = 209.44 radians/second * 0.05 meters = 10.47 meters/second

The velocity of point C can be calculated as:

VC = VB + BC

where VB is the velocity of point B and BC is the velocity of point C relative to point B. Since point B is the instantaneous center of zero velocity, we know that the velocity of point B is zero. Therefore:

VB = 0

To calculate the velocity of point C relative to point B, we can use the formula:

BC = rBC * ωBC

where rBC is the length of the connecting rod BC and ωBC is the angular velocity of BC relative to AB. Let's first calculate the length of BC using the Pythagorean theorem:

BC^2 = AB^2 + AC^2 - 2 * AB * AC * cos(θ)

where θ is the angle between AB and AC. From the diagram, we can see that θ is equal to:

θ = 180° - φ

where φ is the angle between AB and the horizontal axis. Since AB is horizontal, we have:

θ = 180° - (-90°) = 270°

Using the law of cosines, we can calculate the length of BC as:

BC^2 = 175^2 + 50^2 - 2 * 175 * 50 * cos(270°) = 32725

BC = sqrt(32725) = 181.05 mm

To calculate ωBC, we can use the formula:

ωBC = (ωAB * sin(θ)) / sin(φ)

where ωAB is the angular velocity of AB and φ is the angle between AB and the line passing through points A and B. From the diagram, we can see that φ is equal to:

φ = 180° - θ

φ = 180° - 270° = 90°

Therefore:

ωBC = (209.44 radians/second * sin(270°)) / sin(90°) = -209.44 radians/second

(Note that the negative sign indicates that BC is rotating in the opposite direction to AB.)

Now we can calculate the velocity of point C as:

VC = VB + BC = 0 + 181.05 mm * (-209.44 radians/second) = -37.94 meters/second

Therefore, the velocity of piston C at the instant shown is -37

Learn more about here:

https://brainly.com/question/13108309

#SPJ11

To solve this problem, we first need to find the equation for the current in the LC series circuit. We can use the formula:

I(t) = (E / Z) * sin(wt - phi)

where E is the voltage source (given as 30sin50t), Z is the impedance of the circuit, w is the angular frequency (w = 2pi*f), and phi is the phase angle.

To find the impedance of the series circuit, we need to calculate the reactance of the inductor and the capacitor. The reactance of an inductor is given by XL = wL, where L is the inductance (2 H in this case). The reactance of a capacitor is given by XC = 1 / (wC), where C is the capacitance (0.02 F in this case).

Using these formulas, we can calculate the impedance of the circuit:

Z = sqrt[(XL - XC)^2 + R^2] = sqrt[(wL - 1/(wC))^2 + 0^2]

Substituting the values given in the problem, we get:

Z = sqrt[(2*pi*50*2 - 1/(2*pi*50*0.02))^2] = 122.5 ohms

Now we can plug in the values for E and Z into the formula for the current:

I(t) = (30sin50t / 122.5) * sin(50t - phi)

To find the phase angle, we need to find the initial conditions at t=0. Since I(0) = q(0) = 0, we know that the capacitor starts out fully discharged and there is no current flowing in the circuit. Therefore, the phase angle is 0.

Finally, we can simplify the equation for the current:

I(t) = (0.244sin50t) A

Therefore, the current in the LC series circuit for t>0 is given by I(t) = 0.244sin50t A.

Learn more about series circuit: https://brainly.com/question/19865219

#SPJ11

The range of the aircraft when burning the same volume of liquid hydrogen is, 76.728km.

The range of the aircraft when burning the same volume of gaseous hydrogen is, 0.0885km

The range of the aircraft when burning the same volume of liquid hydrogen is:

= 0.82868 × 43000 × (In 613.0597/600)

= 76.728km

Also, the range of the aircraft when burning the same volume of gaseous hydrogen is, 0.0885km

Learn more about hydrogen on

https://brainly.com/question/24433860

#SPJ1

the  diode current  for a voltage of 0.1 mV is approximately 2.88 pA.

(a) To find the diode voltage for a current of 70 uA, we can use the Shockley diode equation:

I = Is * (exp(qV/nkT) - 1)

where I is the diode current, q is the charge of an electron, k is Boltzmann's constant, T is the temperature in Kelvin, and V is the diode voltage. Rearranging the equation and plugging in the given values, we get:

V = (nkT/q) * ln(I/Is + 1)

V = (1.05 * 1.38e-23 * 300 / 1.6e-19) * ln(70e-6 / 1e-17 + 1)

V ≈ 0.682 V

Therefore, the diode voltage for a current of 70 uA is approximately 0.682 V.

(b) To find the diode current for a voltage of 0.1 mV, we can use the same equation and solve for I:

I = Is * (exp(qV/nkT) - 1)

I = Is * (exp(0.1e-3 * q / nkT) - 1)

I = 1e-17 * (exp(0.1e-3 * 1.6e-19 / (1.05 * 1.38e-23 * 300)) - 1)

I ≈ 2.88 pA

learn more about  diode current here:

https://brainly.com/question/30505903

#SPJ11

True, bubbling-up is used to resolve collisions by moving to another index.

Bubbling-up is a technique used in resolving collisions in hash tables by moving an item to another index when the original index is already occupied.

In the context of hashing and data storage, when two elements have the same hash value and attempt to occupy the same index, a collision occurs. To resolve this, the bubbling-up technique can be employed, which involves moving one of the elements to a different index, preventing the collision and ensuring efficient data access.

To learn more about the collisions, visit: https://brainly.com/question/7221794

#SPJ11

c.70 bytes .the length (decimal) of the $data attributeattributeis 70 bytes.


MFT stands for Master File Table, which is a database used by the NTFS file system to store information about files and directories on a Windows computer. In this context, $data refers to the default data attribute of a file, which stores the actual content of the file.
The length of the $data attribute for a file can be determined by examining its MFT entry. In this case, the MFT entry for trojan.exe indicates that the length of its $data attribute is 70 bytes. This means that the file itself is 70 bytes in size, and any content beyond that size (if present) would be stored in additional data attributes or data streams.

Learn more about MFT here:
https://brainly.com/question/29621152

#SPJ11

The load resistance is approximately 0.06Ω.

To determine the load resistance, we can use the formula:

Load resistance = (Load voltage / Current) - Internal resistance

We know the load voltage is 12V and the open terminal voltage of the battery is 12.8V. This means that there is a voltage drop across the internal resistance of the battery:

Voltage drop = Open terminal voltage - Load voltage
Voltage drop = 12.8V - 12V
Voltage drop = 0.8V

We can now calculate the current flowing through the circuit:

Current = Load voltage / Load resistance
Current = 12V / Load resistance

Using Ohm's law, we can also calculate the current as:

Current = (Open terminal voltage - Voltage drop) / Total resistance
Current = (12.8V - 0.8V) / (Load resistance + Internal resistance)
Current = 12V / (Load resistance + 0.06Ω)

Setting these two expressions for current equal to each other, we get:

12V / Load resistance = 12V / (Load resistance + 0.06Ω)

Simplifying this equation, we get:

Load resistance = 0.06Ω

Learn more about load resistance here:-

https://brainly.com/question/13251472

#SPJ11

We can determine whether this heat engine is possible or impossible by calculating its efficiency, which is given by: η = 1 - T_L / T_H

where η is the efficiency, T_L is the temperature of the low-temperature sink, and T_H is the temperature of the high-temperature source.

a. Using the given values, we have:

η = 1 - 300 K / 1100 K = 0.727

The efficiency of the heat engine is 0.727, which means that it converts 72.7% of the heat it receives into useful work, and the remaining 27.3% is rejected to the low-temperature sink. Therefore, it is possible for this heat engine to receive 500 kJ/s of heat from an 1100-K source and reject 300 kJ/s to a low-temperature sink at 300 K.

b. The net rate of change of entropy for the system can be calculated using the following formula:

ΔS = Q_H / T_H - Q_L / T_L

where ΔS is the net rate of change of entropy, Q_H is the heat absorbed from the high-temperature source, Q_L is the heat rejected to the low-temperature sink, T_H is the temperature of the high-temperature source, and T_L is the temperature of the low-temperature sink.

Using the given values, we have:

ΔS = (500 kJ/s) / (1100 K) - (300 kJ/s) / (300 K) = 0.227 kJ/(K*s)

Therefore, the net rate of change of entropy for this system is 0.227 kJ/(K*s), which is positive, indicating that the system is undergoing an irreversible process and its entropy is increasing.

Learn more about entropy here:

https://brainly.com/question/13135498

#SPJ11

The intersection of sets A and B, represented by A∩B, includes all elements that are common to both A and B is A∩B = {7, 11, 13}.

A = {x ∈ Z: x is a prime number}
B = {4, 7, 9, 11, 13, 14}
Comparing the two sets, we find that the prime numbers common to both A and B are 7, 11, and 13.
Therefore, A∩B = {7, 11, 13}.

Any natural number higher than 1 that is not the sum of two smaller natural numbers is referred to be a prime number. A composite number is a natural number greater than one that is not prime. For instance, the number 5 is prime because there are only two ways to write it as a product, 1 5 and 5 1.

A whole number higher than 1 whose only elements are 1 and itself is referred to as a prime number. A whole number that may be split evenly into another number is referred to as a factor. 2, 3, 5, 7, 11, 13, 17, 19, 23 and 29 are the first few prime numbers. Composite numbers are those that have more than two components.

To know more about prime number, click here:

https://brainly.com/question/29629042

#SPJ11

A bubble at the clock input on a flip flop means the flip flop updates at the negative edge of the clock. The correct option is c.

The bubble at the clock input signifies that the flip flop is triggered by the falling or negative edge of the clock signal, which is the transition from a high (positive) value to a low (negative) value.

Therefore, the correct option is c.

Learn more about flip flop, visit: https://brainly.com/question/30638140

#SPJ11

1.

a) The system is stable for 0 < μ < 2

b) The system is neutrally stable for μ = 2

c) The system is unstable for μ > 2

2.

a) For the stable case, the system is underdamped for 0 < μ < 1

b) For the stable case, the system is overdamped for μ > 1

For the system to be stability, all poles must lie on the L.H.P, i.e., Re(p) < 0. Solving the given equation for the characteristic equation, we get p^2 - (μ+ 2)x + (2μ + 5) = 0. Applying the Routh-Hurwitz stability criterion, we get the range of values of μ for which the system is stable to be μ > 1/2.

For the system to be neutrally stable, it must have two identical real poles. For this to occur, the discriminant of the characteristic equation must be equal to zero. Solving the quadratic equation formed from the discriminant, we get μ = -1/2.

For the system to be unstable, at least one pole must lie on the R.H.P, i.e., Re(p) > 0. Thus, the system is unstable for μ < -1/2.

For the stable case (μ > 1/2), the nature of the poles depends on the value of μ.

The system is underdamped when 0 < μ < 1.

The system is overdamped when μ > 1.

Learn more about stability

brainly.com/question/30244458

#SPJ11

Answer:

16.12 A

Explanation:

The maximum (saturation) current that can be extracted from the cathode can be calculated using the Richardson-Dushman equation. The equation is given by:

Js = AT^2exp(-W/kT)

where Js is the saturation current density, A is the emission constant, T is the temperature of the cathode in Kelvin, W is the work function of the cathode in eV, k is the Boltzmann constant in eV/K.

Substituting the given values into the equation we get:

Js = 3E4 * 1800^2 * exp(-2.5 / (8.617333262145E-5 * 1800))

Js = 1.246E8 A/m^2

The area of the cathode is given by width * length = 3.5E-3 * 37E-3 = 0.0001295 m^2.

Therefore, the maximum (saturation) current that can be extracted from this cathode is given by Js * Area = 1.246E8 * 0.0001295 = 16.12 A. So, the maximum current that can be extracted from this cathode is 16.12 A.