a barcode is valid if the digits satisfy a certain constraint. for example, take the 13-digit barcode 1877455846014 and split the first 12 digits into two groups: (1,7,4,5,4,0) and (8,7,5,8,6,1). the first group contains every other digit starting with the first, and the second group contains every other digit starting with the second. take the sum of the digits in the second group, and multiply it by 3. add to that the sum of the digits in the first group. subtract the last digit of that number from 10, and it should match the last digit of the barcode.
Answers
Using knowledge of computational language in python to write a code that valid if the digits satisfy a certain constraint.
Writting the code:
first_group = 0
# set sum of second group to 0
second_group = 0
# loop the string and find the sum of first group
for i in range(0, len(str1)-1, 2):
first_group = first_group + int(str1[i])
# loop the string and find the sum of second group
for i in range(1, len(str1)-1, 2):
second_group = second_group + int(str1[i])
# multiply second group by 3
second_group = second_group * 3
# add first group and second group
new_num = first_group + second_group
# get the last digit and subtract from 10
last_digit = 10 - (new_num % 10)
# if it is equal to last digit of input barcode, then it is valid otherwise it is invalid.
if (last_digit == int(str1[-1])):
return True
else:
return False
if __name__ == '__main__':
# take file name as input
filename = input("Enter the name of the file: ")
# set an empty list to store valid barcode list
valid_barcode_list = []
# open the file
with open(filename) as data:
# read all barcodes and store in a list
all_barcode = data.readlines()
# loop through all barcode of the list
for code in all_barcode:
# remove any extra characters
code = code.strip()
See more about python at brainly.com/question/18502436
#SPJ1
Related Questions
after previewing and cleaning your data, you determine what variables are most relevant to your analysis. your main focus is on rating, cocoa.percent, and company. you decide to use the select() function to create a new data frame with only these three variables. assume the first part of your code is: trimmed flavors df <- flavors df %>% add the code chunk that lets you select the three variables.
Answers
According to the information given, "Forastero" is the bean type that can be found in row six of the dribble and trimmed flavors df <- flavors df %>%
Is the first part of the code.
What is data?
Information that has been altered into a format that can be sent or processed by computers is referred to as data.
In terms of today's computers and transmission technologies, data is information that has been converted into binary digital form. Data may be used as either a singular or plural topic.
Your code's first line is:
flavors df%>% trimmed flavors df
add the section of code that enables you to choose among the three variables.
select(Rating, Cocoa.Percent, Company.Location) (Rating, Cocoa.Percent, Company.Location)You add the code block select to choose the three variables (Rating, Cocoa.Percent, Company.Location). The proper code is taken out. tastes df% and _tastes df% Choose the percentages for (Rating, Cocoa.Percent, and Company.Location). This part of the code:The choose() function allows you to select specified variables for your new data frame.You pass as an input to choose the variables you want to choose their names. Company, location, percentage cocoa rating.Your tibble's first row lists France as the company's location.
Learn more about Data click here:
https://brainly.com/question/26711803
#SPJ4
fault tolerant information systems offer 100 percent availability because they use: group of answer choices dedicated phone lines. high-capacity storage. redundant hardware, software, and power supplies. a digital certificate system. a multitier server network.
Answers
Fault-tolerant information systems offer 100 percent availability because they use: " redundant hardware, software, and power supplies" (Option C)
What is a Fault-tolerant information system?The ability of a system (computer, network, cloud cluster, etc.) to continue working without interruption when one or more of its components fail is referred to as fault tolerance.
The goal of developing a fault-tolerant system is to reduce interruptions caused by a single point of failure, while also assuring the high availability and business continuity of mission-critical systems or programs.
In cloud computing, fault tolerance is creating a plan for continuing current work when a few components fail or become unavailable. This allows businesses to assess their infrastructure needs and requirements, as well as deliver services when the connected devices are unavailable due to a variety of factors.
Learn more about Fault-tolerant information systems:
https://brainly.com/question/13514784
#SPJ1
controls placed at the "top of a form" in the remain on the screen when the form is displayed in form view or layout view and do no
Answers
Yes, the controls placed at the "top of a form" in the remain on the screen when the form is displayed in form view or layout view and do not move or resize when the form is displayed or printed.
The Advantages of Having Controls at the Top of a FormBased on my research, I have found that the controls placed at the "top of a form" in the remain on the screen when the form is displayed in form view or layout view and do not move or resize when the form is displayed or printed.
This is a great feature for forms that need to be displayed in a certain way, or for forms that need to be printed in a certain way. This feature allows you to keep your form looking consistent, no matter how it is viewed or printed.
Learn more about controls at top of form at: https://brainly.com/question/21734515
#SPJ4
in a block in a blockchain what represents the transactional data, sender, receiver, and number of coins? group of answer choices data hash previous hash proof-of-stake
Answers
In a block in a blockchain, a resource which represent the transactional data, sender, receiver, and number of coins is: A. data.
What is a blockchain?A blockchain can be defined as a digital and dynamic financial system that is designed and developed to be used in recording and maintaining transactions that are associated with or made through the use of a bitcoin, usually as a database containing various set of data.
In this context, we can infer and logically deduce that data is a resource that typically represent all of the transactional data, sender, recipient (receiver), and the number of bitcoins in a block in a blockchain.
Read more on blockchain here: brainly.com/question/25700270
#SPJ1
q1. select the correct instruction for creating an array a of 20 elements of double. a) int a[n]; b) double a[20]; c) double 20[a]; d) double a[n];
Answers
The correct instruction for creating an array a of 20 elements of double is int a[n];.
What is an array?
An array is a group of related data elements kept in close proximity to one another in memory. The sole way to retrieve each data element directly is by using its index number, making it the most basic data structure.
There is no need to declare separate variables for each subject, for example, if we wish to keep a student's grades across five disciplines. Instead, we can create an array that will keep the data pieces in close proximity to one another in memory.
The high-precision floating-point data or numbers are stored using the C double data type (up to 15 to 17 digits). Large decimal number values are stored there. The amount of data that can be stored in values is double what can be stored in float data. It is called a double data type as a result.
Learn more about Array click here:
https://brainly.com/question/19634243
#SPJ4
Write pseudo code that reads 100 numbers and outputs the largest , smallest and
the average of the numbers input.
Answers
Using the knowledge in computational language in pseudocode it is possible to write a code that reads 100 numbers and outputs the largest , smallest and the average of the numbers input.
Writting the pseudocode:int ave_of_100_numbers(){
int sum = 0;
for(int i = 0; i < 100; ++i){
sum += arbitrary_number;
}
return sum/100;
}
See more about pseudocode at brainly.com/question/18502436
#SPJ1
you are the security administrator for your organization. you have implemented a cloud service to provide features such as authentication, anti-malware, intrusion detection, and penetration testing. which cloud service have you most likely implemented?
Answers
The SECaaS cloud service is most likely to be implemented in this case.
Define cloud service.
Cloud computing is the on-demand provision of computer system resources, particularly processing power and data storage, without direct active supervision by the user. Infrastructure, platforms, or software in the cloud is hosted by a third party and made accessible to customers online.
Cloud services make it easier for user data to move from front-end clients (such as servers on users' ends, tablets, desktops, and laptops), across the internet to the provider's systems, and back again. The development of cloud-native apps and the adaptability of working in the cloud are promoted by cloud services.
To learn more about cloud service, use the link given
https://brainly.com/question/9759640
#SPJ1
Which of the following items should undergo regression testing?
[ ] A new class that is yet to undergo unit testing.
[X] A tested class where three new functions have been added.
[ ] A new class with five functions.
[ ] A tested class that needs to be used in another class.
Answers
The items that should undergo regression testing is option B: A tested class where three new functions have been added.
Regression testing: what is it?Regression testing is a type of testing used in the software development life cycle to check for unintended breaks after each change. Regression testing addresses a problem that developers frequently run into: the reappearance of previous bugs after implementing fresh changes.
Note that Regression testing is done to determine whether the updates or changes have introduced any new flaws in the functioning of the existing systems. This action would guarantee that the software is unified. Re-testing comes before regression testing procedures in a typical software development pipeline.
Learn more about regression testing from
https://brainly.com/question/13327687
#SPJ1
What is it called when a regular time is set aside to update the company servers at once?.
Answers
Answer:
a batch update
Explanation:
What is it called when you set aside a regular time to update your servers at once? Batch update.
When a regular time is set aside to update the company servers at once is called a batch update.
What is a Batch update?A batch update may be defined as a collection of multiple update statements that are significantly submitted to the database for processing as a batch. Sending multiple update statements to the database together as a unit can, in some situations, be much more efficient than sending each update statement separately.
According to the context of this question, the batch update allows sending a bulk of statements to the database server to execute all at once, which greatly improves the performance. The program will run much faster if a batch update is used. It gives a facility to the user that can schedule the update at their convenience.
Therefore, a batch update is a set of multiple update statements that you set aside a regular time to update your servers at once.
To learn more about Server updation, refer to the link:
https://brainly.com/question/16176572
#SPJ2
in an interview, you are provided the following statements regarding secure protocols. which of the following should you identify as correct? secure ftp (sftp) uses ssl or tls to encrypt commands, while ftp secure (ftps) is an entire protocol itself. x.500 lite is an open protocol, so applications don't need to worry about the type of server hosting the directory. pop3 is a remote email storage service responsible for incoming email, while imap is a store-and-forward service for incoming email. snmpv1 uses community strings that support authentication, while snmpv3 use community strings that support encryption.
Answers
x.500 lite is an open protocol, so applications don't need to worry about the type of server hosting the directory
the difference between sftp and ftps is : SFTP builds on secure shell protocol (SSH) and adds on file transfer capabilities. FTPS builds on file transfer protocol (FTP) and adds on a security and encryption layer. so the statement "secure ftp (sftp) uses ssl or tls to encrypt commands, while secure ftp (ftps) is an entire protocol itself" is considered inappropriate
the meaning of X.500 Protocol is : a protocol (among others) for a client application to access the X. 500 directory. Called the Directory Access Protocol (DAP), it is layered on top of the Open Systems Interconnection (OSI) protocol stack.
the difference between POP3 and IMAP is : POP3 is an abbreviation for Post Office Protocol. IMAP is an abbreviation for Internet Message Access Protocol. The POP is an Internet standard protocol on the application layer that the local email clients use for retrieving emails from any remote server over the TCP/IP connection. so the statement "pop3 is a remote email storage service responsible for incoming email, while imap is a store-and-forward service for incoming email." is considered inappropriate
for the another option, "snmpv1 uses community strings that support authentication, while snmpv3 use community strings that support encryption" it's False because SNPMv3 is the concept of an authentication service (view-based access control) , and SNMPv1 is a framework that control an access and called SNMP MIB view
For more information about the protocol refer to the link: https://brainly.com/question/28446917
#SPJ4
(extra 20%) design an algorithm that reads n points in a plane and outputs any group of four or more colinear points (i.e., points on the same line). the obvious brute-force algorithm requires o(n4) time. however, there is a better algorithm that makes use of sorting and runs in o(n2 log n) time.
Answers
In the Delaunay triangulation, the dual of the Voronoi diagram, the closest pair of points corresponds to the shortest edge.
Simply connect any two cells that have a common edge, then choose the shortest such edge to transform the Voronoi diagram into a Delaunay triangulation. Be aware that this method of locating the nearest pair of locations is not particularly effective. The O(nlogn) divide and conquer algorithm for locating the closest pair of points, for instance, can be trivially extended to multiple dimensions, however it is quite challenging to extend the Voronoi diagram to multiple dimensions. There are no shorter or longer points, white or black points, light or heavy points, or any other variations. All points are "equal" in the sense that they are all the same.
Learn more about algorithm here-
https://brainly.com/question/22984934
#SPJ4
-2
Write a program that contains a function that takes in a 2D list and an integer as parameters. The integer represents the limit of the values inside the list. The function should change any value in the list that is greater than that limit to be equal to limit, and any values less than -limit to be equal to -limit. For example, if the limit is 200, it should change 250 to 200, it should change -300 to -200, and leave any values between -200 and 200 unchanged. Finally, the function should print the resulting list. Ask the user for 25 integers, put them in a 5x5 list, ask the user for the limit, then call the function and output the result.
Answers
Answer:
The integer represents the limit of the values inside the list. The function should change any value in the list that is greater than Explanation:
The tree is at (2, 4) and the range is 3 meters. The bush is at (7, 5) and the range is 2 meters. Finally, the pond is at (5,7) and the range is 3 meters – what is the robot’s position?
Answers
Answer:
32
Explanation:
There is no Chapter 5, nor is there a section on tangents to circles. The curriculum is problem-centered, rather than topic-centered.
How do I choose brainliest answer?
If it works you get brainlest.
Answers
Suppose you ask a question. If there are [tex]2[/tex] answers to your question, Brainly will send you a notification and a button will appear below the answers. If there is only [tex]1[/tex] answer to your question, it will take some time.
How does the brain influence your emotions, thoughts, and values? A) it rejects sensory signals. B) It controls your reaction to emotions C) It assesses the cost sensory signals D) It makes you forget any prior memories
Answers
The brain influence your emotions, thoughts, and values as it rejects sensory signals. The correct option is A.
What are sensory signals?A sensory activation tends to occur when a physical or chemical stimulus is processed by a sensory receptor into a neural signal (sensory transduction).
Chemical messengers such as serotonin and dopamine are used to send signals across the network.
These signals are received by brain regions, resulting in us recognizing objects and situations, assigning emotional value to them to guide behavior, and making split-second risk/reward assessments.
Thus, the correct option is A.
For more details regarding sensory signals, visit:
https://brainly.com/question/12031863
#SPJ1
differenticate between half and full deplex modes of transmission in three points
Answers
Answer:
In simplex mode, the signal is sent in one direction. In half duplex mode, the signal is sent in both directions, but one at a time. In full duplex mode, the signal is sent in both directions at the same time.In simplex mode, only one device can transmit the signal. In half duplex mode, both devices can transmit the signal, but one at a time. In full duplex mode, both devices can transmit the signal at the same time.Full duplex performs better than half duplex, and half duplex in turn performs better than simplex.Hope it helps!
in the manner of figures 8.17b and 8.18b, indicate the location in the vicinity of an edge dislocation at which an interstitial impurity atom would be expected to be situated. now briefly explain in terms of lattice strains why it would be situated at this position.
Answers
It will be in the position because there will be a net reduction in lattice strain energy when the lattice strains cancel tensile strains that are associated with the edge dislocation
What is a compressive strain?The deformation in a solid caused by the application of compressive stress is defined as compressive strain in an elastic material. In other words, compressive strain occurs when a body's length decreases due to equal and opposite forces attempting to compress it.
The impurity atom introduces compressive lattice strains. When these lattice strains partially cancel tensile strains associated with the edge dislocation, there will be a net reduction in lattice strain energy; such tensile strains exist just below the bottom of the extra half-plane of atoms (as shown in the below figure).
Learn more about strain on;
https://brainly.com/question/17046234
#SPJ1
. a user needs to check out a laptop. what would be the general first step to take? a. request approval from appropriate source. b. update device information for tracking. c. prepare the device for check out. d. deploy the device to the user
Answers
A user needs to check out a laptop. The general first step to take is: "device to the user" (Option D)
What is a laptop?A laptop, also known as a laptop computer or notebook computer, is a compact, portable personal computer that has a screen and an alphanumeric keypad.
Deployment refers to the method through which developers distribute programs, modules, updates, and fixes to users.
The processes used by developers to create, test, and disseminate new code have an impact on how fast and successfully a product adapts to changes in customer preferences or needs.
Learn more about laptops:
https://brainly.com/question/21852209
#SPJ1
at the start of your shift how would you check to see where you're working and who your back up is
Answers
Check the myWorkstation: Assignment Tool at the start of your shift .
What is Assignment tool?
Online assignment creation, distribution, collection, and grading are all made possible via the Assignments tool for teachers. Individual student submissions and grades are kept confidential between the student and the instructor, and they are not shared with other students.
What is Workstation?
Instructors can create, distribute, collect, and grade assignments online using the Assignments tool. Assignments are confidential between the student and the teacher; other students cannot see any individual student submissions or grades.
When we at our starting shift ,we should check our workstation and the assignment tool is our backup because everyday we work on the same workstation which we were alloted and the works are given through some of the assignment tool like checklist, Grading Guide, etc.
Learn more about assignment tools click here:
https://brainly.com/question/29353028
#SPJ4
live virtual machine lab 9.1: module 09 implementing secure network solutions what is the minimum number of load balancers needed to configure active/active load balancing?
Answers
The minimum number of load balancers needed to configure active/active load balancing is 2.
A load balancer: what is it?A load balancer is a piece of hardware that serves as a reverse proxy and splits up network or application traffic among several servers. The capacity (number of concurrent users) and dependability of applications are increased by the use of load balancers.
Note that A load balancer acts as the "traffic cop" standing in front of your servers, distributing client requests among all servers capable of doing so in a way that maximizes speed and capacity utilization and makes sure that no one server is overworked, which could impair performance.
Learn more about load balancers from
https://brainly.com/question/27961988
#SPJ1
you work as a network administrator for xyz. you enable powershell remoting on a computer that runs windows 10. you need to limit which powershell cmdlets can be used in a remote session. which of the following actions should you perform in sequence to accomplish this?
Answers
Actions to be performed sequentially to restrict PowerShell cmdlets:
Run the NewPSSession cmdletRun the Register-PSSessionConfiguration cmdletRun the New-PSSessionConfigurationFile cmdletWhat is PowerShell?PowerShell is a command line interface (CLI) that forms a command line interface and scripting language developed by Microsoft, for task automation and configuration management. PowerShell or Windows PowerShell is known as Microsoft Shell or MSH. Almost similar to the UNIX shell operating system, but PowerShell is built based on OOP or Object-Oriented Programming and the Microsoft .NET design. which has a very broad scope.
PowerShell commands are known as cmdlets, which are commands used in the Windows PowerShell environment. Furthermore, there are dozens of parameters and methods that can maximize scripts in PowerShell.
Learn more about PowerShell here https://brainly.com/question/29221154
#SPJ4
The team uses its ________ to determine how many requirements it can commit to accomplishing in the next scrum period.
Answers
The team uses its Team velocity to determine how many requirements it can commit to accomplishing in the next scrum period.
Scrum is a framework that enables individuals to tackle complex adaptive problems while efficiently and innovatively delivering products of the highest quality. Scrum is a process framework that has been used since the early 1990s to oversee the development of complicated products. Rugby, where a scrum is a group of players, gave rise to the term. The word scrum was chosen by the writers of the report because it suggests collaboration. In a 1986 paper titled "The New New Product Development Game," written by Hirotaka Takeuchi and Ikujiro Nonaka, the term "scrum" for software development was first used.
Learn more about scrum here-
https://brainly.com/question/28919511
#SPJ4
alyssa says that no one would risk selling operable or effective malware programs, even on the dark web. why is she wrong?
Answers
Since Alyssa says that no one would risk selling operable or effective malware programs, even on the Dark Web, the reason she is wrong is that: The U.S. Cyber Command sells malware to catch potential hackers.
What is a malware?A malware simply refers to any type of software program (document or file) that is designed and developed to be intentionally harmful to the host computer, website, server, or network, especially for the purpose of wreaking havoc, disruption, and destruction such as the following:
ZombiesRootkitRATAdwareVirusesWormsTrojan horseSpywareWhat is the Dark Web?In Computer technology, the Dark Web is also referred to as darknet and it can be defined as a subset of the world wide web that is intentionally encrypted from conventional web browser and search engines.
This ultimately implies that, the Dark Web is a peer-to-peer network that requires the use of specialized configuration and web browser such as the sales of malware by the U.S. Cyber Command in order to catch potential hackers.
Read more on malware here: https://brainly.com/question/28260161
#SPJ1
Complete Question:
Alyssa says that no one would risk selling operable or effective malware programs, even on the Dark Web. Why is she wrong? Multiple Choice o
The U.S. Cyber Command sells malware to catch potential hackers.
Criminal hackers do make money by selling actual malware.
It is not possible for authorities to track the sale or purchase of malware.
It is not possible for authorities to identify the author of malware.
cloud kicks wants to track shoe designs by products. shoe designs should be unable to be deleted, and there can be multiple designs for one product across various stages. which two steps should the administrator configure to meet this requirement?
Answers
Make a unique item for shoe designs. On the Product object, include a special master-detail field for shoe designs are the two steps the administrator configure to meet this requirement.
What is administrator?Administrator is defined as a person whose duties include assisting in the organization and supervision of an institution's operations. By handling clerical duties and projects, administrators contribute to the efficient operation of offices. In the construction sector, you can be in charge of scheduling project meetings.
Create a special shoe design item. The two configurations the administrator makes to fulfill this need are to add a special master-detail field for shoe designs to the Product object.
Thus, make a unique item for shoe designs. On the Product object, include a special master-detail field for shoe designs are the two steps the administrator configure to meet this requirement.
To learn more about administrator, refer to the link below:
https://brainly.com/question/5958460
#SPJ1
as you are helping a user with a computer problem, you notice that she has written her password on a note stuck to her computer monitor. you check your company's password policy and find that the following settings are currently required:
Answers
The best action to take to make remembering passwords easier so that you no longer have to write the password down is to Implement end-user training
The passwords must consist of a minimum of six characters. (Longer is generally preferable.) No vocabulary term should be seen as the password. Password requirements: mix characters (upper- and lower-case letters) At minimum one number sign must be present there in the password. Introduce individuals to our guide or have employees contact someone in the computer security office if anybody requests a login.
Your question is incomplete, most probably the full question was:
As you are helping a user with a computer problem, you notice that she has written her password on a note stuck to her computer monitor. You check the password policy of your company and find that the following settings are currently required:
• Minimum password length = 10
• Minimum password age = 4
• Maximum password age = 30
• Password history = 6
• Account lockout clipping level = 3
• Require complex passwords that include numbers and symbols
Which of the following is the best action to take to make remembering passwords easier so that she no longer has to write the password down?
- Remove the complex password requirement.
- Decrease the minimum password length.
- Increase the maximum password age.
- Implement end-user training.
- Increase the account lockout clipping level.
Learn more about Implement end-user training: https://brainly.com/question/13042955
#SPJ4
having poor software development practices and failing to program input validation checks during development of custom software can result in a system vulnerable to which type of attack?
Answers
Poor software development practices, such as failing to program input validation checks during custom software development, can expose a system to a buffer overflow attack.
What is a Buffer overflow vulnerability?
Attackers take advantage of buffer overflow issues by overwriting an application's memory. This alters the program's execution path, resulting in a response that damages files or exposes private information. An attacker, for example, may insert extra code into the application, sending new instructions to gain access to IT systems.
If an attacker knows a program's memory layout, they can intentionally feed input that the buffer cannot store and overwrite areas that contain executable code with their own code. To gain control of a program, an attacker can, for example, overwrite a pointer (an object that points to another area in memory) and point it to an exploit payload.
To learn more about Buffer overflow vulnerability, visit: https://brainly.com/question/15122085
#SPJ1
Formal parameters in method headers require including the data type for each parameter in source code.
a. true
b. false
Answers
Answer: Option A) True
Explanation:
Let's take an example:
public static int min (int a, int b)
{
if (a <= b)
return a;
else
return b;
}
We divide method into two parts: header and body.
The method header comprises the access modifiers (public static), return type (int), method name (min), and parameters (int a, int b); if this method threw any exceptions, they would appear next.The method body is a block-statement that immediately follows the method header. The parameter names are like variable names; in fact, we often call them parameter variables to make this similarity explicit.When a method is called, its parameter variables are always initialized by matching arguments first. Then, the method body executes, using these values to compute and return its result; it can also any local variables declard in the block to help in its computation.
If we wrote the statement
System.out.println( Math.min(3,5) );
it would display 3. If we had declared int x = 3, y = 8; and wrote the statement
System.out.println(Math.min (3*x+5,y) );
it would display 8
If we wrote the statement
System.out.println( Math.min(3,5) );
it would display 3. If we had declared int x = 3, y = 8; and wrote the statement
System.out.println(Math.min (3*x+5,y) );
it would display 8
Generally, We call a method by writing its name, followed in parentheses by its arguments (one for each parameter in the method's header) As in the header (where parameters are separated by commas), arguments are are separated by commas as well. When we call a method, Java first evaluates each argument (each can be a simple or complicated expression) and transmits or passes it to its matching parameter; this just means that Java uses each argument's value to initialize it matching parameter in the method. It is equivalent to writing first-parameter = first-argument, then second-parameter = second-argument, etc.
Thus, when calling Math.max(3*x+5,y) above, the first parameter (a) is initialized by the value 14 (3*x+5: the equivalent of a = 3*x+5). Likewise, the second parameter (b) is initialized by the value 8 (y: the equivalent of b = y). Then, Java executes the body of the method, which typically performs some computation using these initialized parameters. It finally returns a result.
let's say you want to quickly highlight all of the cells in your worksheet with a value less than $100. which of the following is the fastest way to do this?
Answers
Quick formatting the following is the fastest way to do this.
What is Quick formatting?
When you select Quick format, the partition's files are deleted, but the disk is not checked for damaged sectors. Use this option only if your hard drive has already been formatted and you are certain it is not damaged. Data that satisfies one or more conditions can have specific formatting applied using Excel Conditional Formatting. By altering the fill color, font color, border style, etc. of the cells, you may highlight and distinguish your data in many ways, just like with regular cell formatting. The main distinction is that it is more adaptable and dynamic; as soon as data changes, conditional formats are instantly changed to reflect the new information.
Based on the value of the formatted cell or another cell, conditional formatting can be applied to specific cells or entire rows. You can use pre-made rules, including color scales, data bars, and icon sets, to conditionally format your data, or you can construct your own rules that specify when and how the selected cells should be highlighted.
Learn more about Quick Formatting click here:
https://brainly.com/question/28249587
#SPJ1
If an equipment SCCR is conditional on a specific type of OCPD and ampere rating, be sure to field install that specific OCPD and ampere rating in the supply circuit to the equipment. True or False
Answers
If an equipment SCCR is conditional on a specific type of OCPD and ampere rating, be sure to field install that specific OCPD and ampere rating in the supply circuit to the equipment is a true statement.
What is SCCR condition?Electrical panels for industrial machinery must be developed and designed with the correct SCCR in order to maintain the system, save downtime, and improve worker safety. This essay aims to clarify its significance and how to locate the necessary computations.
Short-Circuit Current Rating (SCCR) is defined as "the anticipated symmetrical fault current at a nominal voltage to which an apparatus or system is able to be connected without sustaining damage exceeding stated acceptability requirements" in Article 100 of the 2017 NEC (National Electric Code).
The maximum short-circuit current that an electrical component can safely withstand without posing a shock or fire hazard is known as SCCR.
Therefore, If an equipment SCCR is conditional on a specific type of OCPD and ampere rating, be sure to field install that specific OCPD and ampere rating in the supply circuit to the equipment is a true statement.
To learn more about OPCD refer to the link:
https://brainly.com/question/1383211
#SPJ2
you are going to develop an r-chart based on range statistics, and you are using a sample size of 15 for your charting purposes. which of the following is the upper control limit d4 factor for the chart?