Why might a material transmt some waves, while absorbing or reflecting other waves
Answer:
Because the different waves will feel like to bounce off to different directions, and different items will do different actions.
two boats are anchored in the harbor, separated by a horizontal distance of 12m. the boat bob up and down as waves enter
Name and draw the circuit symbols for the
two pieces of equipment used to measure
current and voltage.
Answer:
here is the answer its a picture
Explanation:
How fast does lightning move?
90,000 miler per hour
125,000 miles per hour
175,000 miler per second
90,000 milers per second
Answer:
about 186,000 miles per second
Explanation:
so your closest bet is probably 175 miles per second
Answer:
Correct answer is 90,000 miles PER SECOND
Explanation:
You are trying to tune the fifth string on your guitar, which is supposed to sound the A2 note (i.e., a note two octaves below A4). If the part of your guitar string in between where it is held down is 1.2 m and it has a mass of 0.006 kg, how much tension should you put the string under to get the right tuning?
Answer:
The value is [tex]T = 288 \ N[/tex]
Explanation:
From the question we are told that
The length of the guitar string considered is [tex]L = 1.2 \ m[/tex]
The mass is [tex]m = 0.006 \ kg[/tex]
Generally the tension is mathematically represented as
[tex]T = 4f ^2 m* L[/tex]
Here f is the frequency of the [tex]A_2[/tex] note which is [tex]f= 110 \ Hz[/tex]
So
[tex]T = 4* 110 ^2 * 0.006* 1.2[/tex]
=> [tex]T = 288 \ N[/tex]
The deep interior of the Earth cannot be mapped using seismic waves . true or false ?
Answer: The answer is false.
According to the law of conservation of energy, which statement must be
true?
A. Energy that is transferred cannot be transformed into a different
type of energy.
O B. The total energy of a system can increase only if energy enters the
system.
C. The total energy in a system can only decrease over time.
O D. A system cannot take in additional matter.
SIR
Answer: B
Explanation:
The diagram shows the top view of a 65-kg student at point A on an amusement park ride. The ride spins the student in a horizontal circle with a radius of 2.5 m, at a constant speed of 8.6 m/s. The floor is lowered and the student remains against the wall without falling to the floor.
The magnitude of the centripetal force acting on the student at point A is approximately
Question 4 options:
1398 N
47 N
223 N
1923 N
Answer:
1923 N
Explanation:
From the question given above, the following data were obtained:
Mass (m) = 65 Kg
Radius (r) = 2.5 m
Velocity (v) = 8.6 m/s
Centripetal force (F) =?
The centripetal force, F, can be obtained by using the following formula:
F = mv²/r
F = 65 × 8.6² / 2.5
F = 65 × 73.96 / 2.5
F = 4807.4 / 2.5
F = 1922.96 ≈ 1923 N
Thus, the magnitude of the centripetal's force acting on the student is approximately 1923 N
A skateboard rolls off a horizontal ledge that is 1.12 m high, and lands
1.48 m from the base of the ledge.
How much time was he in the air?
(Unit = s)
why are magnetic materials attracted to magnets
Hello!
Topic: Magnetic material
Why are magnetic materials attracted to magnets?
Because when you expose any magnetic material to a magnetic field, magnetc material atoms start to align their electrons, because they flow by magnetic fields.
Then the atoms reacts to the field, and try to get together to the magnetic electrons field.
Thats why magnetic materials are attracted to magnets.
Which refers to the area on the thermometer marked with the letter A? scale bulb mercury strip number line
Answer:
The answer is numberline, D
Explanation:
I got it right on edge
Answer:
A
Explanation:
Scale
Got it right on Edge:)
A block slides across a flat, horizontal surface to the right. For each choice, the arrows represent velocity vectors of the block at successive intervals of time. Which of the following diagrams represents the situation in which the block loses kinetic energy?
The diagrams the question refers to is in the attachment.
Answer: Third diagram or alternative C.
Explanation: In physics, vector is a representation of magnitude and direction.
Kinetic Energy is energy made by a moving object, i.e., when an object with mass has velocity, it also has Kinetic Energy. It's calculated as:
[tex]K=\frac{1}{2}mv^{2}[/tex]
Vectors below are representing change in velocity during intervals of time.
In the first diagram, vectors doesn't change, so velocity and kinetic energy are constant.
At the second, velocity still constant, however, the "intensity" of the arrow is weaker than the first, which means velocity is less than the first diagram and so is its kinetic energy.
In the fourth diagram, the arrows grow bigger from left to right. This means velocity increases during time. If velocity grows bigger, so does kinetic energy.
In the third diagram, the arrows decrease as it goes to the right: the block's velocity decreases during the successive intervals, which means, kinetic energy diminishes through the interval.
Thus, diagram C represents the situation in which the block loses kinetic energy.
5. bending the electric wire a.change in size
b.change in shape
c.change in texture
Answer:
change in shape
hope this will help you
a vector needs to be divided into components when ?
Answer:
Calculating the magnitude of a vector is only the beginning. The magnitude function opens the door to many possibilities, the first of which is normalization. Normalizing refers to the process of making something “standard” or, well, “normal.” In the case of vectors, let’s assume for the moment that a standard vector has a length of 1. To normalize a vector, therefore, is to take a vector of any length and, keeping it pointing in the same direction, change its length to 1, turning it into what is called a unit vector.To normalize a vector, simply divide each component by its magnitude. This is pretty intuitive. Say a vector is of length 5. Well, 5 divided by 5 is 1. So, looking at our right triangle, we then need to scale the hypotenuse down by dividing by 5. In that process the sides shrink, divided by 5 as well.
I hope this is helpful, Have a Great Day!!
What is an inexpensive, portable, and common way to assess body fat in the fitness industry?
DEXA
Bioelectrical impedance
Skinfold testing
Hydrostatic weighing
Answer: Skinfold testing
Explanation:
Skinfold testing, is also referred to as calliper testing and it's used to know the body fat percentage. Skinfold testing is an inexpensive, portable, and common way to assess body fat in the fitness industry.
It is typically done with the use of caliper tapes, marker pens which makes it cheap. Skinfold testing isn't usually accurate which is as a result of human errors.
Describe the three times acceleration can happen
Answer:
There are three ways an object can accelerate: a change in velocity, a change in direction, or a change in both velocity and direction.
Explanation:
There are three ways an object can accelerate by a change in velocity, a change in direction, or a change in both velocity and direction.
What is acceleration?Acceleration is given by the ratio of Resultant or total force acting on any object and the its mass.
It can also be defined as the rate change of velocity with time.
acceleration a = (Δv) / (Δt)
The change in velocity will change the acceleration. As, the acceleration is vector quantity, its direction change will also change the acceleration.
And both the change in velocity and direction will have effect on acceleration.
Learn more about acceleration.
https://brainly.com/question/12550364
#SPJ2
A a healthy diet and exercise have an impact on the overall health of
the body. While your digestive and respiratory systems seem very
separate in their activities, in reality, the systems work together in
several ways. Which of these correctly pairs a body system with it's
function? All BUT ONE may apply.
Answer:
This would be answer choice A
The digestive system breaks large nutrient molecules into smaller ones that are absorbed into the bloodstream. So, the correct option is A.
What is meant by metabolism ?Metabolism is defined as the mechanism of the body by which the energy is produced from the food we eat, through some chemical reactions.
Here,
The overall proper health of the body is attained through having proper diet and regular exercise. In order to maintain the health, several physiological activities occurs in our body simultaneously.
Metabolism is one of the main physiological mechanism in our body, by which the food we eat is being converted into energy which is necessary for the growth and proper functioning of our body cells and organs.
Digestion is the important process of metabolism.
Digestion is the process by which the large, insoluble food molecules we consume, are broken down into smaller, water-soluble molecules, so that it can be easily absorbed into the blood plasma.
The different steps of digestion are ingestion, propulsion, mechanical digestion, chemical digestion, absorption and defecation.
Hence,
The digestive system breaks large nutrient molecules into smaller ones that are absorbed into the bloodstream.
To learn more about metabolism, click:
https://brainly.com/question/21881098
#SPJ2
7- A mass initially at O moves 10.0 m to the east and then 5.0 m to the
north. What is the final displacement of the mass?
Answer:
15.0m
Explanation:
10.0+5.0
=15.0m
The structure of the NaCl crystal forms reflecting planes 0.541 nm apart. What is the smallest angle, measured from these planes, at which constructive interference of an X-ray beam reflecting off the two planes is observed?
Answer:
[tex]\theta=4.5^{\circ}[/tex]
Explanation:
Given that,
The distance between reflecting planes is 0.541 nm, d = 0.541 nm
Let the wavelength is 0.085 nm
We need to find the smallest angle, measured from these planes, at which constructive interference. Using Bragg's equation to find it as follows :
[tex]m\lambda=2d\sin\theta[/tex]
For smallest angle, m = 1
[tex]\theta=\sin^{-1}(\dfrac{m\lambda}{2d})\\\\\theta=\sin^{-1}(\dfrac{1\times 0.085\ nm }{2\times 0.541\ nm })\\\\\theta=4.5^{\circ}[/tex]
So, the smallest angle is 4.5 degrees.
Which of the following is not true about arid deserts?
a.
They can be found in North America.
b.
The rain falls mostly as snow during the winter.
c.
They are very hot and dry.
d.
The rain often evaporates before it hits the ground.
Please select the best answer from the choices provided
A
B
C
D
Answer: B | The rain falls mostly as snow during the winter.
5. A baseball player bats a ball with a force of 1,000 N. The ball exerts a reaction force against the bat
of...
a. Less than 1,000 N
b. More than 1,000 N
c. 1,000 N
Why???
Explaining the concept:
Reaction force is the equal and opposite force applied by an object after we apply some force to it
This is explained in the Newton's Third Law of Motion, which says: "For every action, there is an equal and opposite reaction"
This means that any force we apply on an object, it applies the same force on us
Reaction Force exerted by the ball:
We now know what a reaction force is. Now looking at the scenario, we can see that the player applied a force of 1000N on the ball using his bat
The ball will also apply an equal and opposite force on the Bat,
So, the ball will apply a force of 1000N on the Bat
Therefore, Option C is correct
A toy car with an initial velocity of 5 m/s slows to a stop with an acceleration of -1.5 m/s^2.
What is your car's initial velocity?
What is the car's final velocity?
What is the acceleration of the car?
Write the equation you will use to solve this problem.
What is the displacement of the toy car?
4.8 m
8.3 m
16.7 m
21.4 m
Car's Initial velocity (u) = 5 m/s
Car's Final velocity (v) = 0 m/s (Stop)
Acceleration of the car (a) = -1.5 m/s²
Equation used to solve this problem:
[tex] \boxed{ \bf{ {v}^{2} = {u}^{2} + 2as}}[/tex]
By substituting values in the equation, we get:
[tex] \rm \longrightarrow {0}^{2} = {5}^{2} +2 \times ( - 1.5) \times s \\ \\ \rm \longrightarrow 0 = 25 - 3s \\ \\ \rm \longrightarrow 25 - 3s = 0 \\ \\ \rm \longrightarrow 25 - 25 - 3s =0 - 25 \\ \\ \rm \longrightarrow - 3s = - 25 \\ \\ \rm \longrightarrow 3s = 25 \\ \\ \rm \longrightarrow \dfrac{3s}{3} = \dfrac{25}{3} \\ \\ \rm \longrightarrow s = 8.3 \: m[/tex]
[tex] \therefore [/tex] Displacement of the toy car (s) = 8.3 m
What experimental evidence led to the development of the atomic model before the one before it?
it is dangerous to stand near the railway leak when train passing by,why?
It is dangerous to stand close to railroad tracks when a rapidly moving commuter train passes. Explain why atmospheric pressure would push you toward the moving train. Water pressure inside a hose nozzle can be less than atmospheric pressure due to the Bernoulli effect.
Pls brainliest!? :)
On land, the most massive concrete block you can carry is 25 kg. Given concrete’s 2200‐ kg/m3 density, how massive a block could you carry underwater
Answer:
46kg approx.Explanation:
Given data
Density of concrete ρ_c=2200kg/m3
Mass of concrete m_c= 25kg
In water
[tex]F_{P2} + F_{app}-m_{cg}=0[/tex]
[tex]F_{app}=m_{cg}-F_{P2}[/tex]
Max Fapp = 25*g
Buoyancy force
[tex]F_{P2} = \rho WgV_c= \rho Wg\frac{\rho_c}{m_c}\\\\F_{ p2}= \rho Wg\frac{\rho_c}{m_c}[/tex]
[tex]25*g=m_cg- \rho W g\frac{mW}{\rho_c}= m_cg(1- \frac{\rho W}{\rho_c} )[/tex]
[tex]m_c=25( \frac{\rho_c}{\rho_c- \rho W} )[/tex]
substitute
[tex]m_c=25( \frac{2200}{2200- 1000} )\\\\m_c=25*1.833\\\\m_c=45.8[/tex]
=46kg approx.
HELP!!!!!!!!!!!
The earliest multi celled organisms on Earth were:
a
Bacteria
b
Vertebrates
c
Invertebrates
d
Plants
Answer:
Bacteria
Explanation:
Answer:
The answer is bacteria.
Explanation:
Bacteria were the first known multi-celled organism on Earth.
What is acceleration
[tex]{\tt{\red{\underline{\underline{\huge{Answer:}}}}}}[/tex]
[tex]\longrightarrow[/tex] The rate of change of velocity per unit time is called acceleration.
[tex]\longrightarrow[/tex] Its SI unit is m/s².
[tex]\huge\boxed{\fcolorbox{blue}{red}{Thank you}} [/tex]