A 57.6 g sample of methane (CH4) is found to contain 43.2 g of carbon. What is the
percent composition of Carbon and Hydrogen? How much hydrogen (in grams) would a
37.8 g sample of methane contain?
Answers
Answer:
Explanation:
The atomic mass of carbon is 12.011 g/mol.The atomic mass of hydrogen is 1.00794 g/mol.This means that the atomic mass of methane is 12.011+4(1.00794)=16.04276 g/mol.
The percent composition by mass of carbon is [tex]\frac{12.011}{16.04276} \times 100=\boxed{74.9\%}[/tex]The percent composition by mass of hydrogen is [tex]\frac{4(1.00794)}{16.04276} \times 100=\boxed{25.1\%}[/tex]This means that in a 37.8-gram sample of methane, there would be [tex](37.8)\left(\frac{25.1}{100} \right)=\boxed{9.49}[/tex] grams of hydrogen.
Related Questions
You wish to make a 0.285 M hydroiodic acid solution from a stock solution of 12.0 M hydroiodic acid. How much concentrated acid must you add to obtain a total volume of 50.0 mL of the dilute solution
Answers
The amount, in mL, of the concentrated acid required, would be 1.1875 mL
DilutionFrom the dilution equation:
m1v1=m2v2 where m1 and m2 = molarity before and after dilution, and v1 and v2 = volume before and after dilution.
m2 = 0.285M, m1 = 12.0M v2 = 50.0 mL
v1 = m2v2/m1 = 0.285x50/12 = 1.1875 mL
Thus, 1.1875 mL of the acid would be taken and diluted with water up to the 50 mL mark.
More on dilution can be found here: https://brainly.com/question/13949222
#SPJ1
Which describe beta decay? check all that apply. in beta decay, a proton becomes a neutron and a positron. in beta decay, a neutron becomes a proton and an electron. in beta decay, a neutron becomes a proton and a gamma ray. beta decay releases energy. beta decay releases a helium-4 nucleus.
Answers
The statements which best describe beta decay are: option 1, 2 and 4.
What is a beta particle?A beta particle can be defined as an isotope which typically undergoes radioactive decay through the emission of a radiation with a -1 charge.
Based on scientific information and records from radioactivity, we can infer that the statements which best describe beta decay are:
During beta decay, an atom of proton becomes a neutron and a positron. During beta decay, an atom of neutron becomes a proton and an electron.Beta decay releases energy.Read more on beta decay here: https://brainly.com/question/12448836
#SPJ4
Answer:
1,2,4
Explanation:
23 Which device requires electrical energy to
produce a chemical change?
(3) voltaic cell
(1) electrolytic cell
(2) salt bridge
(4) voltmeter
Answers
Answer:
electrolytic cell
Explanation:
Electrolytic cell used electrical energy to do electrolysis.
Then by using oxidation and reduction ions produced it does produce chemical changes
Option A
Assume a parent isotope has a half-life of 100 million years. How old is a sample that
contains 15% of its original parent isotope?
250 million years
270 million years
200 million years
100 million year
Answers
Answer:
270 million
Explanation:
1/2 ^n = .15 (.15 is 15% in decimal)
log both sides
n log (1/2) = log (.15 )
n = 2.737 half lives
EACH half life is 100 million
2.737 * 100 million = 273.7 million
Circulacion de electrones en un material conductor en determinado tiempo.
Answers
Answer:
falso
Explanation:
tiempo no determinado El circulation de elctrones
Cyclohexenone is a useful starting material for drug synthesis. For each reaction, predict the major addition product for the reaction between an α,β‑unsaturated ketone and carbon nucleophile
Answers
Cyclohexenone is a useful starting material for drug synthesis. For each reaction. The major additional product for the reactions are respectively given as;
A soft electrophile A hard electrophileThis is further explained below.
What is an electrophile?Generally, An electrophile is simply defined as a species of a chemical compound that may receive an electron pair from a carbonyl group in order to establish chemical bonds.
In conclusion, It is common practice to add 1,4 significance to the alkene of asymmetric nucleophiles when using organocuprate reagents in the process at the top.
Grignard reagents often add 1,2 to the carbonyl of asymmetric carbonyl compounds in the bottom reaction
Read more about electrophile
https://brainly.com/question/21773561
#SPJ1
Cyclohexenone is a useful starting material for drug synthesis. For each reaction. The major additional product for the reactions are respectively given as;
A soft electrophile
A hard electrophile
What is an electrophile?Generally, An electrophile is simply defined as a species of a chemical compound that may receive an electron pair from a carbonyl group in order to establish chemical bonds.
In conclusion, It is common practice to add 1,4 significance to the alkene of asymmetric nucleophiles when using organocuprate reagents in the process at the top.
Grignard reagents often add 1,2 to the carbonyl of asymmetric carbonyl compounds in the bottom reaction
Read more about electrophiles at:
brainly.com/question/21773561
#SPJ4
Which change to a DNA molecule would have the least effect on an organism? an addition to a base sequence at the beginning of a gene a deletion from a base sequence in the middle of a gene a substitution in a base sequence that does not code for a protein a substitution that creates a “stop” code in the middle of a gene
Answers
Answer:
Change in a single nitrogen base in the DNA sequence will not have any significant effect on the organism.So A: an addition to a base sequence at the beginning of a gene
Explanation:
This is known as point mutation and it does not have any significant change in the protein and it is least harmful type of DNA mutation.
HELP NEED DONE ASAPP BEFORE 11:59PM!!!!
Predict the total pressure in Container C if the initial pressure in Container A was tripled and. Container B was reduced by one-third then mixed in Container C.
Container A Oxygen 287 kPa
Container B Nitrogen 429 kPa
Container C Oxygen + Nitrogen
Pressure
=
P total
Answers
Answer:
I think B sorry if wrong
Explanation:
have a good day
Which structure is the Lewis structure for ammonia (NH3)?
Answers
Answer:
C
Explanation:
Because NH3 has 8 valence electrons, and Hydrogen can only have 1 bond
A solid chloride E which sublimes on heating reacted with an alkali F to give a choking gas G.G turns red litmus paper blue . identify E, F and G
Answers
Answer:
E:ammonium chloride
F:sodium hydroxide
G:ammonia
Calculate the molarity of an HCl solution if 23.88 mL of it reacts with 6.5287 grams of sodium carbonate (106 g/mol) according to
2HCl + Na2CO3 → 2NaCl + H2O + CO2 Answer in units of mol/L.
I NEED HELP
Answers
Answer:
5.158 mol/L
Explanation:
To find the molarity, you need to use the formula:
Molarity (M) = moles / volume (L)
You have been grams sodium carbonate. You need to (1) convert grams Na₂CO₃ to moles (via molar mass), then (2) convert moles Na₂CO₃ to moles HCl (via mole-to-mole ratio from equation), then (3) convert mL to L (by dividing by 1,000), and then (4) use the molarity equation.
Steps 1 - 2:
2 HCl + 1 Na₂CO₃ ----> 2 NaCl + H₂O + CO₂
6.5287 g Na₂CO₃ 1 mole 2 moles HCl
-------------------------- x ------------- x ------------------------- = 0.12318 mole HCl
106 g 1 mole Na₂CO₃
Step 3:
23.88 mL / 1,000 = 0.02388 L
Step 4:
Molarity = moles / volume
Molarity = 0.12318 mole / 0.02388 L
Molarity = 5.158 mole/L
**mole/L is equal to M**
Which fundamental force allows you to use a compass?
O A. Strong nuclear
OB. Gravitational
C. Weak nuclear
OD. Electromagnetic
Answers
The compass uses the magnetic force of the earth to point North.
4.
A dead alkaline battery is found to contain a compound of manganese and oxygen. Its percentage composition
is 70.0% Mn and 30.0% O. What is the empirical formula of this substance?
Answers
The dead battery with a percentage composition of 70.0% Mn and 30.0% O has the empirical formula Mn₂O₃.
What is an empirical formula?An empirical formula is the minimal relationship between the atoms in a chemical formula.
A dead alkaline battery is 70.0 % Mn and 30.0 % O. To find the empirical formula, we will divide each percentage by the molar mass of the element.
Mn: 70.0/54.94 = 1.27O: 30.0/16.00 = 1.88Then, we divide both numbers by the smallest one.
Mn: 1.27/1.27 = 1O: 1.88/1.27 ≈ 1.5Finally, we multiply both numbers by 2 so that they are whole numbers.
Mn: 1 × 2 = 2O: 1.5 × 2 = 3The empirical formula of the compound is Mn₂O₃.
The dead battery with a percentage composition of 70.0% Mn and 30.0% O has the empirical formula Mn₂O₃.
Learn more about empirical formula here: https://brainly.com/question/1603500
#SPJ1
Find the number of protons, neutrons, and electrons in 6429Cu.
Answers
Answer:
bottom :)
Explanation:
Question: How Many Protons, Neutrons, And Electrons Are In A Neutral Atom Of Copper, Cu, With An Atomic Number Of 29 And Mass Number Of 64? A. Protons = 64, Neutrons = 29, Electrons = 29 B. Protons = 35, Neutrons = 29, Electrons = 35 C.
how many valence electrons does sr2+ have
Answers
Answer:
8 valence electrons
Explanation:
One atomic mass unit ( 1 amu)
is equal to the mass of a carbon-12 atom multiplied by the quantity
Answers
Answer: 1/12
Explanation:
A carbon-12 atom has a mass of 12 amu, so multiplying this by 1/12, we get 1 amu.
Concentrated HCl is 15 M (15 molar). A 500 mL quantity of this solution is diluted by adding water to give a final volume of 2.5 L. What is the molarity of the resulting solution
Answers
The molarity of the resulting solution obtained by diluting the stock solution is 3 M
Data obtained from the question Molarity of stock solution (M₁) = 15 MVolume of stock solution (V₁) = 500 mL Volume of diluted solution (V₂) = 2.5 L = 2.5 × 1000 = 2500 mL Molarity of diluted solution (M₂) =? How to determine the molarity of diluted solutionM₁V₁ = M₂V₂
15 × 500 = M₂ × 2500
7500 = M₂ × 2500
Divide both side by 2500
M₂ = 7500 / 2500
M₂ = 3 M
Thus, the volume of the resulting solution is 3 M
Learn more about dilution:
https://brainly.com/question/15022582
#SPJ1
3. Humans discovered how to use fire and tools. How was this knowledge passed along to younger generations?
Communication skills were developed so knowledge could be passed along to younger generations.
Primitive knowledge was instinctive so that the basic skills of fire and tools came naturally to everyone.
Younger people were forced to spend long hours building fires and making tools.
O The younger generations were able to figure out how to use tools on their own.
Answers
Communication skills were developed so knowledge could be passed along to younger generations.
How knowledge will pass through generations?Knowledge will pass from one generation to another with the help of education. The skill people give education to their youngers about fire and tools. In this way, skills of fire and tools pass from one generation to another.
So we can conclude that communication skills were developed so knowledge could be passed along to younger generations.
Learn more about knowledge here: https://brainly.com/question/24621985
#SPJ1
Answer:
A
Explanation:
Assume that your electrical power company gets its energy from a hydroelectric dam. Outline all of the energy changes that occurred from the falling water that turned the generators at the dam to the hot air that was produced from your hair dryer this morning.
Answers
Kinetic energy in different forms occurred from the falling water that turned the generators at the dam to the hot air that was produced from your hair dryer this morning.
What is Kinetic energy ?Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.
Kinetic energy (water) to electric energy (dam) as the hydroelectric dam works.
Then, as the current travels from the plant to your crib, electric energy to heat energy (wire resistance).
Then, when you are using the dryer electric energy to heat energy (hot air) and sound energy (air particles vibrate due to the heat energy).
Therefore, Kinetic energy in different forms occurred from the falling water that turned the generators at the dam to the hot air that was produced from your hair dryer this morning.
Learn more about Kinetic energy here ;
https://brainly.com/question/12669551
#SPJ1
The pressure of x ml of a gas was increased from 2 atm to 4 atm at constant temperture. what will be the new volume?
Answers
The new volume of the gas given the data from the question is 1/2X mL
Data obtained from the question
Initial volume (V₁) = X mL
Initial pressure (P₁) = 2 atm
New pressure (P₂) = 4 atm
New Volume (V₂) = ?
How to determine the new volume
The new volume of the gas can be obtained by using the Boyles’ law equation as illustrated below:
P₁V₁ = P₂V₂
2 × X = 4 × V₂
2X = 4V₂
Divide both side by 4
V₂= 2X / 4
V₂ = 1/2X mL
Learn more about gas laws:
https://brainly.com/question/6844441
#SPJ1
Check Your Learning
What mass of CO is required to react with 25.13 g of Fe2O3
according to the equation Fe₂O3 + 3 CO2 Fe + 3CO₂?
Answers
Answer:
convert the 25.13 g of Fe2O3 into moles by dividing by its molar mass (159.69) to get that. When looking at the stoichiometric coefficients, we can see that for every 1 mole of Fe2O3, there needs to be 3 moles of CO.
Explanation:
Question 2 of 35
Which two phrases describe ice storms?
A
A. Temperatures way below freezing
B. A large amount of snow falling
C. Temperatures near freezing
D. A large amount of ice forming
Please help!
Answers
An ice storm is a temperature below freezing resulting from large amount of snow falling, i.e., options A and B.
What is ice storm?Freezing rain causes ice storms. Raindrops travel into a tiny layer of below-freezing air near the earth's surface, where they freeze on contact with the ground, trees, automobiles, and other things.
Ice forms when cold rain freezes in contact with surfaces below the freezing point.
Thus, the correct options A and B.
For more details regarding ice storm, visit:
https://brainly.com/question/1542793
#SPJ1
Which reaction takes place in a nuclear fission reactor?
OCH N
→
239
O Pu+ He 242 Cm
94
96
O 27 Co+He→Co+n
139
O 235 U+n Kr+¹Ba+3/n
56
92
Answers
The reaction that takes place in a nuclear fission reactor is as follows: 235/92 U + 1/0n 94/36Kr + 139/56 Ba + 3/0n.
What is a nuclear fission reactor?A nuclear fission reactor is the place where nuclear chain reactions occur that produce energy by fission.
Nuclear fission is the nuclear reaction in which a large nucleus splits into smaller ones with the simultaneous release of energy.
Therefore, the option that involves the splitting of atoms into smaller ones is as follows: 235/92 U + 1/0n 94/36Kr + 139/56 Ba + 3/0n.
Learn more about nuclear fission reactor at: https://brainly.com/question/10203508
#SPJ1
What is the volume of the sphere? 8 cm
Answers
Radius of sphere , r = 8cm
Volume of sphere = 4/3 pi r^3
=> volume of sphere = 4/3 x 3.14 x 8 x 8 x 8 = 2143.6 cubic units
How many grams of SO2 would you need to dissolve in 100g of 40 degree water to make a saturated solution?
If you heated the solution to 90 degrees would the new solution be unsaturated, or supersaturated?
Answers
The grams of SO₂ that would be dissolved in 100 g of 40 degree water to make a saturated solution can be calculated by making solubility curve.
What is mass?Mass is the quantity of matter of a physical body.
If you want to calculate the mass of Sulfur dioxide in 100 g of 40 degree, you have to make a solution curve.
With the increase in temperature, the solubility increases as well
Thus, the grams of SO₂ that would be dissolved in 100 g of 40 degree water to make a saturated solution can be calculated by making a solubility curve.
Learn more about mass
https://brainly.com/question/19694949
#SPJ1
The chemical colchicine is used in the production of karyotypes. Colchicine prevents spindle fibers from forming during the cell cycle. What is a result of preventing spindle fibers from forming?
Answers
The result of preventing spindle fibers from forming is mitotic division stops in metaphase and cannot proceed to anaphase.
What is colchicine?Colchicine is a drug use to remove swelling and decrease the amount of uric acid production.
It prevents the formation of spindle fibers during the cell cycle.
Thus, the correct option is C.
Learn more about colchicine
https://brainly.com/question/3417925
#SPJ4
Each substance to the right of the arrow in a chemical equation is a.
Answers
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answers
Answer:
ITS B
Explanation:
MY CONSCIOUS MIND IS TELLING ME
Decomposition occurs when...
Answers
Answer:
Decomposition begins at the moment of death, caused by two factors: 1.) autolysis, the breaking down of tissues by the body's own internal chemicals and enzymes, and 2.) putrefaction, the breakdown of tissues by bacteria.
Explanation:
hope it will help you
An example of polytamic anoin would be a. Ca+2 b. NH4+ c. F d. PO4-3
Answers
[tex]PO_4^{-3}[/tex] and [tex]NH^{4+}[/tex] are polyatomic anions composed of two or more atoms.
What is a polyatomic anion?A polyatomic ion is an ion composed of two or more atoms. Examples: The hydroxide cation ([tex]OH^-[/tex]) and the phosphate cation ([tex]PO_4^{3-}[/tex]) are both polyatomic ions.
[tex]PO_4^{-3}[/tex] and [tex]NH^{4+}[/tex] are the polyatomic anions because both contain more than 1 atom.
Hence,[tex]PO_4{-3}[/tex] and [tex]NH^{4+}[/tex] are polyatomic anions composed of two or more atoms.
Learn more about the polyatomic anion here:
https://brainly.com/question/13544727
#SPJ1