a 3.0 kg particle is located on the x-axis at x = −7.0 m and a 5.0 kg particle is on the x axis at x = 3.0 m. what is the center of mass of this two–particle system?

a. The finite population correction factor is not necessary. The expected value of the sample proportion is 0.34 and the standard deviation of the sample proportion is 0.0508.

b. The probability that the sample proportion is greater than 0.37 is approximately 0.2776.

a. To determine if the finite population correction factor is necessary, we need to check if the sample size is large enough in relation to the population size. If the sample size is less than 5% of the population size, then the correction factor is not necessary. In this case, n = 100 is less than 5% of N = 3,000, so we don't need to apply the finite population correction factor.

The expected value of the sample proportion is equal to the population proportion, so E(p) = p = 0.34.

The formula for the standard deviation of the sample proportion is

σ(p) = sqrt[p(1-p)/n]

Substituting in the values, we get:

σ(p) = sqrt[(0.34)(1-0.34)/100] = 0.0508

Therefore, the expected value of the sample proportion is 0.34 and the standard deviation of the sample proportion is 0.0508.

b. We want to find the probability that the sample proportion is greater than 0.37. We can use the z-score formula and standard normal distribution to find this probability.

The z-score formula is:

z = (P - p) / σ(P)

Substituting in the values, we getp

z = (0.37 - 0.34) / 0.0508 = 0.591

Using a standard normal distribution table or calculator, we can find that the probability of z being greater than 0.591 is approximately 0.2776.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The surface area of the sphere of radius of 7cm is 616 square centimeters.

We know that the surface area of a sphere of radius r is given by the formula:

S = 4*(22/7)*r²

Here we want to find the surface area of a sphere whose radius is r = 7 cm.

Replacing it in the formula above, we will get:

S = 4*(22/7)*7²

S = 4*22*7

S = 616

And the units are square centimeters, so the correct option is C.

Learn more about surface area at.

https://brainly.com/question/16519513

#SPJ1

The differential of f(x,y)= √(x³ + y²) at the point (1,2) is (3/2)dx + (2/√5)dy.

To find the differential of f(x,y)= √(x³ + y²) at the point (1,2), we first need to find the partial derivatives of f with respect to x and y:

∂f/∂x = (3x² / (2 √(x³ + y²))
∂f/∂y = (y / √(x³ + y²))

Then, we can evaluate these partial derivatives at the point (1,2):

∂f/∂x (1,2) = (3(1)²) / (2 √(1³ + 2²)) = 3/2
∂f/∂y (1,2) = (2) / √(1³ + 2²) = 2/√5

Finally, we can use the formula for the differential of f:

df = (∂f/∂x)dx + (∂f/∂y)dy

Substituting the values we found, we get:

df = (3/2)dx + (2/√5)dy

Learn more about differential:

https://brainly.com/question/28099315

#SPJ11

The given series is convergent, and its sum is approximately 0.1524.

To determine whether the series ∑n=1∞ 1/(9+[tex]e^{(-n)}[/tex]) is convergent or divergent, we can use the comparison test with the series 1/n.

Since for all n, [tex]e^{(-n)}[/tex] > 0, we have [tex]9 + e^{(-n)}[/tex] > 9, and so [tex]1/(9+e^{(-n)})[/tex] < 1/9.

Now, we can compare the given series with the series ∑n=1∞ 1/9, which is a convergent p-series with p=1.

By the comparison test, since the terms of the given series are smaller than those of the convergent series 1/9, the given series must also converge.

To find the sum of the series, we can use the formula for the sum of an infinite geometric series:

S = a/(1-r)

where a is the first term and r is the common ratio. In this case, the first term is 1/10 (since [tex]e^{(-1)}[/tex] is very small compared to 9.

We can approximate [tex]9+e^{(-n)}[/tex] as 9 for large n), and the common ratio is [tex]e^{(-1)} < 1[/tex]. Therefore, the sum of the series is:

S = (1/10)/(1 - [tex]e^{(-1)}[/tex]) = (1/10)/(1 - 0.3679) ≈ 0.1524

Therefore, the given series is convergent, and its sum is approximately 0.1524.

Learn more about convergent and divergent series

brainly.com/question/15415793

#SPJ11

p(f | e) = p(e | f) * p(f) / p(e) = (1/5) / (1/3) = 3/5

Therefore, p(f | e) = 3/5.

We can use Bayes' theorem to find p(f | e):

p(f | e) = p(e | f) * p(f) / p(e)

We know that p(e) = 1/3 and p(f) = 1/2. To find p(e | f), we can use the conditional probability formula:

p(e | f) = p(e ∩ f) / p(f)

We are given that p(e | f) = 2/5, so we can rearrange the formula to get:

p(e ∩ f) = p(e | f) * p(f) = (2/5) * (1/2) = 1/5

Now we have all the information we need to apply Bayes' theorem:

p(f | e) = p(e | f) * p(f) / p(e) = (1/5) / (1/3) = 3/5

Therefore, p(f | e) = 3/5.

To learn more about information visit:

https://brainly.com/question/13629038

#SPJ11

Basis containing the given set of vectors is as follows:

(a) { (1, 0, 1, 0), (0, 1, 1, 0) }; (b) { (1, 0, 0, 0), (0, 1, 0, 0), (0, 0, 0, 1) }

(c) { [1 0 0 0], [0 2 0 0], [0 0 0 1] }

To construct a basis of V, we can use Gaussian elimination. We can start by creating an augmented matrix with the given vectors as columns:

(a)

| 1 0 1 0 |

| 0 1 1 0 |

| 1 0 -1 0 |

| 0 0 0 0 |

Perform elementary row operations to get matrix in row echelon form:

| 1 0 1 0 |

| 0 1 1 0 |

| 0 0 -2 0 |

| 0 0 0 0 |

Therefore, a basis for V is:

{ (1, 0, 1, 0), (0, 1, 1, 0) }

(b)

| 1 0 0 0 |

| 1 0 0 0 |

| 0 1 0 0 |

| 0 1 0 0 |

| 0 0 0 1 |

| 0 0 0 1 |

Perform elementary row operations to get matrix in row echelon form:

| 1 0 0 0 |

| 0 1 0 0 |

| 0 0 0 1 |

| 0 0 0 0 |

| 0 0 0 0 |

| 0 0 0 0 |

Therefore, a basis for V is:

{ (1, 0, 0, 0), (0, 1, 0, 0), (0, 0, 0, 1) }

(c) We can see that given set of vectors is already a basis for M22, since they are linearly independent. Therefore, a basis for V is:

{ [1 0 0 0], [0 2 0 0], [0 0 0 1] }

Know more about vector here:

https://brainly.com/question/15519257

#SPJ11

The vector Xp=(1 1)e^t+(1 -1)te^t is a particular solution of the given system.

To verify that Xp=(1 1)e^t+(1 -1)te^t is a particular solution of the given system, we need to substitute it into the given system and check if it satisfies the equations.

The given system is:

X'=(2 1 3 4)X-(1 7)e^t

Substituting Xp=(1 1)e^t+(1 -1)te^t into the above system, we get:

Xp'=(2 1 3 4)Xp-(1 7)e^t

Differentiating Xp with respect to t, we get:

Xp'=(1 1)e^t+(1 -1)e^t+(1 -1)te^t

Substituting the above expression into the system, we get:

(1 1)e^t+(1 -1)e^t+(1 -1)te^t=(2 1 3 4)((1 1)e^t+(1 -1)te^t)-(1 7)e^t

Simplifying, we get:

(1 1)e^t+(1 -1)e^t+(1 -1)te^t=(2e^t+2te^t+3e^t-3te^t)-(1 7)e^t

Combining like terms, we get:

(1 1)e^t+(1 -1)e^t+(1 -1)te^t=(2e^t+2te^t+3e^t-3te^t)-(1 7)e^t

(1 1)e^t+(1 -1)e^t+(1 -1)te^t=(2e^t+2te^t+3e^t-3te^t-1e^t-7e^t)

(1 1)e^t+(1 -1)e^t+(1 -1)te^t=(4e^t-3te^t)

Comparing the left-hand side and the right-hand side, we can see that they are equal, which means Xp=(1 1)e^t+(1 -1)te^t satisfies the given system of equations. Therefore, Xp=(1 1)e^t+(1 -1)te^t is a particular solution of the given system.

For more questions like Equation click the link below:

https://brainly.com/question/14598404

#SPJ11

The coefficient of x^9 in the expansion of (x+1)^14 + x^3(x+2)^15 is 320322.

To find the coefficient of x^9, we need to look at the terms in the expansion that have x^9.

For (x+1)^14, the term that includes x^9 is:

C(14,9) * x^9 * 1^5

where C(14,9) is the binomial coefficient or combination of 14 things taken 9 at a time. We can calculate this coefficient using the formula:

C(14,9) = 14! / (9! * 5!) = 2002

So the term that includes x^9 in (x+1)^14 is:

2002 * x^9 * 1^5 = 2002x^9

For x^3(x+2)^15, the term that includes x^9 is:

C(15,6) * x^3 * 2^6

where C(15,6) is the binomial coefficient or combination of 15 things taken 6 at a time. We can calculate this coefficient using the formula:

C(15,6) = 15! / (6! * 9!) = 5005

So the term that includes x^3(x+2)^15 is:

5005 * x^3 * 2^6 * x^6 = 5005 * 64x^9

Adding the coefficients of x^9 from both terms, we get:

2002 + 5005 * 64 = 320322

Therefore, the coefficient of x^9 in the expansion of (x+1)^14 + x^3(x+2)^15 is 320322.

To learn more about expansion visit : https://brainly.com/question/13602562

#SPJ11

The covariance of the random variables X and Y is 1/120.

Exercise 3.49 on page 106 states:

"Suppose that the joint probability density function of X and Y is given by f(x,y) = 3x, 0 ≤ y ≤ x ≤ 1, 0 elsewhere. Find E[X], E[Y], and cov(X,Y)."

To find the covariance of X and Y, we first need to find the expected values of X and Y:

E[X] = ∫∫ x f(x,y) dy dx = ∫0¹ ∫y¹ 3[tex]x^2[/tex] dy dx = ∫0¹ [tex]x^3[/tex] dx = 1/4

E[Y] = ∫∫ y f(x,y) dy dx = ∫0¹ ∫y¹ 3xy dy dx = ∫0¹ [tex]x^2[/tex]/2 dx = 1/6

Next, we need to use the formula for covariance:

cov(X,Y) = E[XY] - E[X]E[Y]

To find E[XY], we integrate the joint probability density function multiplied by XY:

E[XY] = ∫∫ xy f(x,y) dy dx = ∫0¹ ∫y¹ 3x^2y dy dx = ∫0¹ [tex]x^4[/tex]/2 dx = 1/10

Putting it all together, we have:

cov(X,Y) = E[XY] - E[X]E[Y] = 1/10 - (1/4)(1/6) = 1/120

Therefore, the covariance of the random variables X and Y is 1/120.

To learn more about variables visit:

https://brainly.com/question/17344045

#SPJ11

Answer:

3.2 miles

Step-by-step explanation:

[tex]\frac{5684.106yds}{1}[/tex] · [tex]\frac{3ft}{1yd}[/tex] · [tex]\frac{1mile}{5280ft}[/tex] You can cross cancel words just like numbers.  Cross cancel the words: yards and feet.  That will leave you with just miles

[tex]\frac{5684.106}{1 }[/tex] ·[tex]\frac{3}{1}[/tex] · [tex]\frac{1mile}{5280}[/tex]

[tex]\frac{17052.318}{5280}[/tex]

3.22960568182

This rounded to the nearest tenth would be: 3.2

Helping in the name of Jesus.

The distance between the points (4, 3), (7, 5) using the distance formula is sqrt(13) and using integration is also sqrt(13).

(a) Using the distance formula:

d = sqrt((x2 - x1)^2 + (y2 - y1)^2)

= sqrt((7 - 4)^2 + (5 - 3)^2)

= sqrt(9 + 4)

= sqrt(13)

Therefore, the distance between the points (4, 3) and (7, 5) is sqrt(13).

(b) Using integration:

The distance between two points can also be found by integrating the magnitude of the velocity function that connects the two points.

Let P1 = (4, 3) and P2 = (7, 5), and let f(t) be the position function of an object moving from P1 to P2 along some path. Then the velocity function is given by:

v(t) = f'(t)

The magnitude of the velocity is given by:

|v(t)| = sqrt((dx/dt)^2 + (dy/dt)^2)

We can find the position function by integrating the velocity function:

f(t) = ∫ v(t) dt

For the points P1 and P2, we have:

P1 = (4, 3) and P2 = (7, 5)

Therefore,

dx/dt = 3, dy/dt = 2

Thus,

|v(t)| = sqrt(3^2 + 2^2) = sqrt(13)

Integrating this over the interval [0,1], we get:

d = ∫0^1 |v(t)| dt

= ∫0^1 sqrt(13) dt

= sqrt(13) * t |0^1

= sqrt(13)

Therefore, the distance between the points (4, 3) and (7, 5) is sqrt(13), using integration as well.

Know more about integration here:

https://brainly.com/question/14502499

#SPJ11

It believed that self interest was the greatest motivator of the people.

What about self interest?

Self-interest refers to the motivation or desire of an individual to pursue their own benefit or well-being. It is a fundamental human behavior that drives individuals to make decisions and take actions that are likely to result in personal gain or advantage.

Self-interest can manifest in various forms, such as seeking financial gain, pursuing personal happiness, or striving for success and recognition. While self-interest can be seen as a positive force that drives individuals to work hard and achieve their goals, it can also lead to negative consequences if pursued at the expense of others or the common good.

In economic theory, self-interest is often viewed as a key driver of market behavior, as individuals and businesses seek to maximize their profits or utility. However, many argue that a purely self-interested approach can lead to negative externalities and social problems, and that considerations of the greater good and moral principles should also be taken into account.

According to the given information:

Alexander Hamilton believed that self interest was the greatest motivator of people.

To know more about self interest visit:

https://brainly.com/question/7036239

#SPJ1

It believed that self interest was the greatest motivator of the people.

What about self interest?

Self-interest refers to the motivation or desire of an individual to pursue their own benefit or well-being. It is a fundamental human behavior that drives individuals to make decisions and take actions that are likely to result in personal gain or advantage.

Self-interest can manifest in various forms, such as seeking financial gain, pursuing personal happiness, or striving for success and recognition. While self-interest can be seen as a positive force that drives individuals to work hard and achieve their goals, it can also lead to negative consequences if pursued at the expense of others or the common good.

In economic theory, self-interest is often viewed as a key driver of market behavior, as individuals and businesses seek to maximize their profits or utility. However, many argue that a purely self-interested approach can lead to negative externalities and social problems, and that considerations of the greater good and moral principles should also be taken into account.

According to the given information:

Alexander Hamilton believed that self interest was the greatest motivator of people.

To know more about self interest visit:

https://brainly.com/question/12972879

#SPJ1

By answering the presented question, we may conclude that As a result, fraction 3/8 cup of syrup remained in the measuring cup.

A whole can be represented by any number of equal pieces, or fractions. In standard English, fractions denote the number of units of a specific size. 8, 3/4. Fractions are included in a whole. In mathematics, numbers are stated as a ratio of the numerator to the denominator. In simple fractions, each of these is an integer. A fraction can be found in the numerator or denominator of a complex fraction. True fractions have denominators that are greater than their numerators. A fraction is a sum that represents a percentage of a total. You may assess it by splitting it down into smaller chunks. For example, 12 represents half of a whole number or object.

Troy started with half a cup of syrup in the measuring cup. Then he poured 1/8 cup back into the jug.

To find out how much syrup is still in the measuring cup, subtract the quantity put back into the jug from the amount that was originally in the measuring cup.

1/2 - 1/8

We need to discover a common denominator to remove these two fractions. 8 is the lowest common multiple of 2 and 8.

As a result, we may rewrite 1/2 as 4/8:

4/8 - 1/8 = 3/8

As a result, 3/8 cup of syrup remained in the measuring cup.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

Since the limit is a finite value, the integral is convergent. Furthermore, the value of the convergent integral is 21e^(-1), which is approximately 7.713.

whether the integral is convergent or divergent.

First, let's rewrite the integral using proper notation:

∫(1 to ∞) 21e^(-x) dx

Now, to determine if the integral is convergent or divergent, we'll perform the following steps:

1. Apply the limit as the upper bound approaches infinity:

lim(b→∞) ∫(1 to b) 21e^(-x) dx

2. Evaluate the improper integral using the antiderivative:

F(x) = -21e^(-x)

Now, we need to find the limit as b approaches infinity:

lim(b→∞) (F(b) - F(1))

3. Calculate the limit:

lim(b→∞) (-21e^(-b) - (-21e^(-1)))

As b approaches infinity, e^(-b) approaches 0. Therefore, the limit is:

-(-21e^(-1)) = 21e^(-1)

Since the limit is a finite value, the integral is convergent. Furthermore, the value of the convergent integral is 21e^(-1), which is approximately 7.713.

Visit here to learn more about Divergent:

brainly.com/question/30726405

#SPJ11

Answer:

2 5/8

Step-by-step explanation:

1.5*1.75=2.625=2 5/8

Answer: 7.35 inches

Step-by-step explanation:

The formula for the surface area of a cylinder is 2πrh + 2πr^2, where r is the radius and h is the height of the cylinder.

Given that the diameter of the tub is 10 inches, the radius (r) is half of that, which is 5 inches.

So, the equation for the surface area of the cylinder can be written as:

2π(5)(h) + 2π(5)^2 = 387.79

Simplifying the equation gives:

10πh + 50π = 387.79

Dividing both sides by 10π gives:

h + 5 = 12.34

Subtracting 5 from both sides gives:

h = 7.34

Therefore, the height of the tub is 7.35 inches (rounded to two decimal places).

Answer:

45

Step-by-step explanation:

Trapeziod Area - 1/2(a + b)×h

1/2(6 + 12)×5

1/2(18)×5

(9) × 5

Area= 45 cm sq.

There is only 1 way to draw a line segment with endpoint p that is perpendicular to line n.

If line m is parallel to line n and point p is between lines m and n, there is only one line segment with endpoint p that is perpendicular to line n.

To visualize this, consider the lines m and n as two horizontal parallel lines, and point p is located between these lines. There can be only one vertical line segment with an endpoint at point p that is perpendicular to both lines m and n, since a perpendicular line to line n will also be perpendicular to line m due to their parallel nature.

Find out more on perpendicular at https://brainly.com/question/29290298

#SPJ1

We are given the differential equation [tex]y" + 2y = -18x^2e^2x[/tex]n:. To find the complementary function, we first solve the homogeneous equation:[tex]y" + 2y = 0[/tex]. The answer is the particular solution is:[tex]y_p(x) = -3/2*x^2e^2x[/tex].

The characteristic equation is:[tex]r^2 + 2 = 0[/tex]

Which has the roots:[tex]r = ±√(-2)[/tex]

Since the roots are complex, we can write them as:[tex]r1 = i√2[/tex]

and [tex]r2 = -i\sqrt{2}[/tex]

Thus, the complementary function is: y_c(x) = [tex]c1cos(\sqrt{2x} )[/tex] + [tex]c2sin(\sqrt{2}x )[/tex]

To find the particular solution, we assume a solution of the form:[tex]y_p(x) = Ax^2e^2x[/tex]

Taking the first and second derivatives of y_p(x), we get:

[tex]y'_p(x) = 2Axe^2x + 2Ax^2e^2x[/tex]

[tex]y''_p(x) = 4Axe^2x + 4Ax^2e^2x + 4Ae^2x[/tex]

Substituting y_p(x), y'_p(x), and y''_p(x) back into the original differential equation, we get:

[tex](4Axe^2x + 4Ax^2e^2x + 4Ae^2x) + 2(Ax^2e^2x) = -18x^2e^2x[/tex]

Simplifying and collecting like terms, we get:[tex](6A + 4Ax)xe^2x + (4A + 2A)x^2e^2x = -18x^2e^2x[/tex]

Equating coefficients of like terms, we get:[tex]6A + 4Ax = 0, 4A + 2A = -18[/tex]

Solving for A, we get:

A =[tex]\frac{-3}{2}[/tex]

Therefore, the particular solution is:[tex]y_p(x) = -3/2*x^2e^2x[/tex]

The general solution is the sum of the complementary function and the particular solution:

[tex]y(x) = y_c(x) + y_p(x)[/tex]

[tex]y(x) = c1cos(√2x) + c2sin(√2x) - 3/2*x^2e^2x[/tex]

Where c1 and c2 are constants determined by initial conditions.

To learn more about differential equation, visit here

https://brainly.com/question/31583235

#SPJ4

Rounding this to the nearest hundredth gives an expected count of 120 people with profile B.

What is an expected count?

Expected count is a term used in statistical analysis, particularly in the context of contingency tables and hypothesis testing. It refers to the number of observations that would be expected in a particular category of a contingency table if there was no association between the variables being examined.

Expected counts are calculated by multiplying the marginal totals of a contingency table to obtain the total number of observations that would be expected under the null hypothesis. Expected counts are then compared to the observed counts in the contingency table to assess whether there is a significant association between the variables being examined.

To find the expected count of people with profile B, we need to multiply the total sample size (300) by the expected percentage of people with profile B (40% or 0.4):

Expected count of B = 0.4 x 300 = 120

Rounding this to the nearest hundredth gives an expected count of 120 people with profile B.

To know more about expected count, visit:

https://brainly.com/question/29052046

#SPJ1

The perimeter and the area of the triangle are given as follows:

First we obtain the area, as we have the two parameters, as follows:

The area is half the multiplication of the base and the height, hence it is given as follows:

[tex]A = 0.5 \times 16 \times 8\sqrt{3}[/tex]

[tex]A = 64\sqrt{3}[/tex] cm².

For the perimeter, we must obtain the lateral segments, considering the bisection and the Pythagorean Theorem, as follows:

[tex]l^2 = 8^2 + (8\sqrt{3})^2[/tex]

l² = 64 + 192

l² = 256

l = 16.

Hence the perimeter is given as follows:

P = 3 x 16

P = 48 cm.

More can be learned about perimeter and area of a triangle at https://brainly.com/question/24571594

#SPJ1

A particular solution of the given differential equation y'' + 3y' + 4y = 8x + 2 is: y_p = 2x - 1 (option c).

The particular solution of the given differential equation can be found by using the method of undetermined coefficients. We assume that the particular solution has the same form as the right-hand side of the equation, i.e., y_p = Ax + B, where A and B are constants. We then substitute this into the differential equation and solve for A and B.

y" + 3y' + 4y = 8x + 2

y_p = Ax + B
y'_p = A
y"_p = 0

Substituting these into the equation, we get:

0 + 3A + 4Ax + 4B = 8x + 2

Comparing the coefficients of x and the constant term, we get:

4A = 8  =>  A = 2
4B = 2  =>  B = 1/2

Therefore, the particular solution is y_p = 2x + 1, which is option a.

Learn more about Differential Equation:

brainly.com/question/14620493

#SPJ11

The value of x at the 70th percentile of a standard normal distribution is approximately 0.52

In a standard normal distribution, the mean (μ) is 0 and the standard deviation (σ) is 1. To find the value of x that corresponds to the 70th percentile, we need to find the z-score that corresponds to the 70th percentile and then use that z-score to find the corresponding value of x.

The z-score corresponding to the 70th percentile can be found using a standard normal distribution table or calculator. The table or calculator will give the value of the cumulative distribution function (CDF) for a given z-score. We want to find the z-score such that the CDF is 0.70. From the standard normal distribution table, we can find that the z-score is approximately 0.52.

Once we have the z-score, we can use the formula

x = μ + zσ

Substituting the values of μ = 0, σ = 1, and z = 0.52, we get

x = 0 + 0.52(1) = 0.52

Learn more about percentile here

brainly.com/question/1594020

#SPJ4

Therefore, there are 81,920 different pizzas that this parlor offers.

Since there are five different sizes of pizza, a customer can choose any one of the five sizes. For each size, the customer can choose to have any combination of the 14 toppings, or no toppings at all. This means that for each size of pizza, there are $2^{14}$ different possible topping combinations, including the option of having no toppings. So the total number of different pizzas that the parlor offers is:

=5*2¹⁴

=5*16,384

=81,920

To know more about combination,

https://brainly.com/question/20211959

#SPJ11

The requried relative frequency of rolling an odd number is 3/5.

An odd number was rolled 15 times.

The total number of rolls was 25.

The relative frequency of rolling an odd number is found by dividing the number of times an odd number was rolled by the total number of rolls:

Relative frequency = number of odd rolls / total number of rolls

Substituting the values, we get:

Relative frequency = 15/25

Relative frequency = 3/5

Therefore, the relative frequency of rolling an odd number is 3/5.

Learn more about relative frequency here:

https://brainly.com/question/29739263

#SPJ1

we have shown that if f(n) = f(n2), then n = n2, which means that f is one-to-one.

The question asks us to define a function f from the set of integers to itself, where f(n) = 2 - 3n for each integer n. We then need to prove that this function is one-to-one.

To prove that f is one-to-one, we need to show that for any two integers n and n2, if f(n) = f(n2), then n = n2. Here's how we can do that:

Proof:

1. Suppose n and n2 are any integers such that f(n) = f(n2).

2. Substituting from the definition of f gives us:

2 - 3n = 2 - 3n2

3. Simplifying this equation, we get:

-3n = -3n2

4. Dividing both sides by -3, we get:

n = n2

5. Therefore, we have shown that if f(n) = f(n2), then n = n2, which means that f is one-to-one.

Visit here to learn more about one-to-one:

brainly.com/question/29670841

#SPJ11

The probability of at least one male getting an earring is approximately 1 - 0.0173 ≈ 0.9827 or 98.27%.

To find the probability of at least one male getting an earring, we'll use the complementary probability.

There are 12 crackers with 4 containing earrings, so the probability of a cracker not having earrings is 2/3.

With 6 males at the party, the probability of all males not getting earrings is (2/3)^6 ≈ 0.0173.

Therefore, the probability of at least one male getting an earring is approximately 1 - 0.0173 ≈ 0.9827 or 98.27%.

Read more about probability here:

https://brainly.com/question/25870256

#SPJ1

Five  5 critical values for the daily temperatures in Tucson, Arizona, in December: are- 49, 56.5, 58, 59.5 and 67.

The graphical tool used to illustrate the data is the box and whisker plot. For the data to be plotted, some summary statistics are required. The first quartile, median, third quartile, and maximum are those values. It is applied to determine if an outlier exists in the data.

Given data for the Average daily temperatures in Tucson, Arizona.

58, 60, 59, 50, 67, 53, 57, 62, 58, 57, 56, 63, 57, 53, 58, 58, 59, 49, 64, 58

Arrange is the ascending order;

49, 50, 53, 53, 56, 57, 57, 57, 58, 58, 58, 58, 58, 59, 59, 60, 62, 63, 64, 67,

n = 20

n/2 = 10 th term - 58

(n + 1)/2 = 11th term - 58

The median Q2 - (n/2 + (n+1)/2) /2

(58+58) / 2 = 58

Now, consider the middle numbers before the median for lower quartile :Q1 - (5th + 6th)/2

(56 + 57) / 2 = 56.5

Consider middle numbers after the median for upper quartile:

Q3 - (15th +16th)/2

(59 + 60) / 2 = 59.5

Five  5 critical values are-

49, 56.5, 58, 59.5 and 67.

Thus, the  Box and whisker plot for the all four estimated quratiles are formed.

Know more about the Box and whisker plot:

https://brainly.com/question/28098703

#SPJ1