Since the block of ice is at rest on a frictionless horizontal surface, the block will have a velocity of 0.1 m/s in the easterly direction after 1.0 s.
How do you calculate the velocity of the ice block?Since the block is on a frictionless surface, there is no opposing force. Therefore, the force applied will result in an acceleration of the block.
Given:
mass of block (m) = 10 kg
force (F) = 1.0 N
time (t) = 1.0 s
Using Newton's second law of motion:
F = ma
where F is the force of the ice block, m is the mass of the ice block , and a is the acceleration of the ice block.
Rearranging the equation to solve for acceleration:
a = F/m
Substituting the given values:
a = 1.0 N / 10 kg
a = 0.1 m/s²
The block's velocity can be calculated using the equation:
v = at
where v is the final velocity, a is the acceleration, and t is the time interval.
Substituting the given values:
v = 0.1 m/s² x 1.0 s
v = 0.1 m/s
Therefore, the block will have a velocity of 0.1 m/s in the easterly direction after 1.0 s.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ1
is there an advantage to following through when hitting a baseball with a bat, therby maintaining a longer contact between the bat and the ball? explain
Yes, there is an advantage to following through when hitting a baseball with a bat, as it helps to maintain a longer contact between the bat and the ball.
When a batter follows through after making contact with the ball, they are able to transfer more energy from the bat to the ball, which can result in a harder hit and greater distance. Additionally, following through helps the batter to maintain their balance and control their swing, which can improve their overall accuracy and consistency. Overall, following through is an important aspect of successful baseball hitting technique.
Following through allows for better control, more power, and higher accuracy when striking the ball. By maintaining a longer contact between the bat and the ball, you're able to transfer more energy to the ball, resulting in a faster and farther hit. Additionally, it helps in maintaining proper body mechanics during the swing, reducing the risk of injury.
In summary, following through when hitting a baseball with a bat provides benefits such as better control, increased power, and improved accuracy, while also reducing the risk of injury.
To know more about baseball refer here :
https://brainly.com/question/12147917
#SPJ11
If the number of turns in a solenoid is cut in half, what will the current need to be to maintain the same magnetic field in the solenoid?
a. Twice
b. same
c. half
d. one fourth
To maintain the same magnetic field in a solenoid when the number of turns is cut in half, the current will need to be:
a. Twice
The magnetic field (B) inside a solenoid is given by the formula B = μ₀ × n × I, where μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current flowing through the solenoid.
When the number of turns is halved, n becomes n/2. To maintain the same magnetic field (B), we need to find the new current I':
B = μ₀ × (n/2) ×I'
Since we want to maintain the same magnetic field, we have:
μ₀ × n × I = μ₀ × (n/2) × I'
Dividing both sides by μ₀ and n, we get:
I = (1/2) × I'
Therefore, to maintain the same magnetic field, the new current I' must be twice the original current:
I' = 2 ×I
To learn more about magnetic field https://brainly.com/question/26257705
#SPJ11
Light of wavelength 632 nm is incident upon a sapphire (n = 1.77) prism at an angle of incidence (with respect to the normal) of 70 degrees. If the angle of the prism is 60 degrees, the angle of refraction at the second face,\Theta, is:
A. 26 degrees
B. 37 degrees
C. 56 degrees
D. 63 degrees
E. 70 degrees
The angle of refraction (Theta) at the second face of the sapphire prism is approximately 63 degrees .(D)
To find the angle of refraction at the second face, follow these steps:
1. Use Snell's Law to find the angle of refraction (r1) at the first face: (D)
n1 * sin(i) = n2 * sin(r1)
2. Calculate the angle inside the prism (α):
α = 180 - angle of the prism - r1
3. Use the total internal reflection condition for the second face to find the critical angle (θc):
sin(θc) = n2 / n1
4. Use the angle of incidence (i) at the second face:
i2 = α + θc
5. Use Snell's Law again to find the angle of refraction (Theta) at the second face:
n2 * sin(i2) = n1 * sin(Theta)
To know more about Snell's Law click on below link:
https://brainly.com/question/2273464#
#SPJ11
Determine the maximum stress in the beam's cross section. Take M - 43 lb-ft. (Figure 1) Express your answer to three significant figures and include the appropriate units. A Value Units Submit Request
The maximum stress in the beam's cross-section is determined using the formula max stress = [tex](M * c) / I[/tex], where M is [tex]43 lb-ft[/tex], c is 2 inches, and I is [tex]10.67 in^4[/tex] , resulting in a value of 8.07 psi.
To determine the maximum stress in the beam's cross-section, we can use the formula:
[tex]max stress = (M * c) / I[/tex]
Where M is the bending moment (given as [tex]43 lb-ft[/tex]), c is the distance from the neutral axis to the outermost point in the cross-section (in this case, the distance from the center of the beam to the bottom edge), and I is the moment of inertia of the cross-section.
From Figure 1, we can see that the beam is rectangular with a width of 2 inches and a height of 4 inches. The moment of inertia of a rectangular cross-section is:
[tex]I = (b * h^3) / 12[/tex]
Where b is the width and h is the height. Plugging in the values for our beam, we get:
[tex]I = (2 * 4^3) / 12 = 10.67 in^4[/tex]
To find c, we need to determine the location of the neutral axis. For a rectangular cross-section, the neutral axis is located at the centroid, which is at the center of the cross-section. Since the height is 4 inches, the distance from the neutral axis to the bottom edge is 2 inches.
Now we can plug in our values into the formula for max stress:
[tex]max stress = (43 lb-ft * 2 in) / 10.67 in^4 = 8.07 psi[/tex]
Therefore, the maximum stress in the beam's cross-section is 8.07 psi.
learn more about maximum stress here:
https://brainly.com/question/23270001
#SPJ11
Let Z denote the set of integers. If m is a positive integer, we write Zm for the system of "integers modulo m." Some authors write Z/mZ for that system. For completeness, we include some definitions here. The system Zm can be represented as the set {0, 1, ... , m - 1} with operations (addition) and (multiplication) defined as follows. If a, b are elements of {0, 1,...,m-1}, define: ab = the element c of {0, 1,..., m - 1} such that a +b-c is an integer multiple of m. a ob = the element d of {0, 1,...,m - 1} such that ab- d is an integer multiple of m.
The system Zm (or Z/mZ) represents the set of integers modulo m, which can be written as {0, 1, ..., m-1}. Addition (a⊕b) and multiplication (a⊗b) in Zm are defined by finding elements c and d such that a+b-c and ab-d are integer multiples of m, respectively.
To perform addition (a⊕b) in Zm:
1. Add the elements a and b.
2. If the sum is less than m, the result is the sum.
3. If the sum is greater than or equal to m, subtract m from the sum.
To perform multiplication (a⊗b) in Zm:
1. Multiply the elements a and b.
2. Divide the product by m and find the remainder.
3. The remainder is the result of the multiplication in Zm.
These operations enable us to work with integers in a modular system, simplifying arithmetic and allowing for various applications in number theory, cryptography, and computer science.
To know more about cryptography click on below link:
https://brainly.com/question/88001#
#SPJ11
brian hits a baseball straight toward a 15 ft high fence that is 400 ft from home plate. the ball is hit when it is 2.5ft above the ground and leaves the bat at an angle of 30 degrees with the horizontal. find the initial velocity needed for the ball to clear the fence
The right ventricle of the heart pumps oxygen-poor blood to the lungs. The correct answer is B.
This is because the right atrium receives oxygen-poor blood from the body and then passes it on to the right ventricle, which then pumps it to the lungs for oxygenation. Once the blood is oxygenated, it returns to the left side of the heart via the pulmonary vein, and the left ventricle then pumps the oxygen-rich blood to the body. The right ventricle of the heart pumps oxygen-poor blood to the lungs. In this process, the right ventricle receives oxygen-poor blood from the right atrium and pumps it into the pulmonary artery, which then transports the blood to the lungs to get oxygenated.
To know more about Ventricles visit:
https://brainly.com/question/29564818
#SPJ11
After the main life of the sun, where it fuses hydrogen in the core, it will become a
Select one:
a. red gient
b. red dwarf
c. green dwarf
d. blue giant
After the main life of the sun, where it fuses hydrogen in the core, it will become a red giant.
As a star like the sun ages, it will eventually exhaust the hydrogen in its core, which is what fuels the nuclear fusion reactions that generate the star's energy. As a result, the core will contract and heat up, causing the outer layers of the star to expand and cool. This results in the star becoming a red giant, a large and luminous star that is much cooler than the sun in its current state.
During this phase, the star will undergo significant changes, including the fusion of helium and other elements, and eventually the ejection of its outer layers in a planetary nebula. The core of the star will eventually collapse into a white dwarf, a dense and hot remnant of the star's former self.
To know more about hydrogen
brainly.com/question/31018544
#SPJ11
what are the initial transient and warm-up periods for a steady-state simulation?
In a steady-state simulation, the initial transient period is the time it takes for the system to reach a steady state from the initial conditions.
In a steady-state simulation, the initial transient period is the time it takes for the system to reach a steady state from the initial conditions. During this period, the system's response is dominated by the initial conditions, and the system's behavior may be highly variable and unpredictable. The length of the initial transient period depends on the complexity of the system and the accuracy required for the simulation.
The warm-up period, on the other hand, is a period of time that is added to the initial transient period to stabilize the system before data is collected. During this time, the system is allowed to run until it reaches a steady state, and any initial transients have dissipated. The length of the warm-up period is typically determined by examining the output of the simulation and determining how long it takes for the system to stabilize.
The length of both the initial transient and warm-up periods can be determined through trial and error, or through a sensitivity analysis in which the simulation is run with different initial conditions and warm-up periods to determine the most appropriate values. Once the steady state is reached, the system can be considered to be in a state of equilibrium, and data can be collected for analysis.
Visit to know more about Steady state:-
brainly.com/question/1900452
#SPJ11
A particle with a charge of −1.24×10−8C is moving with instantaneous velocity v = (4.19×10^4m/s)i^ + (−3.85×10^4m/s)j^ .
What is the force exerted on this particle by a magnetic field B⃗ = (1.90 T ) i^? Enter the x, y, and z components of the force separated by commas.
What is the force exerted on this particle by a magnetic field B⃗ = (1.90 T ) k^?
A charged particle with a magnitude of -1.24×10⁻⁸C is in motion with a velocity of (4.19×10⁴m/s)i^ + (-3.85×10⁴m/s)j^. The force exerted on the particle by the magnetic field is -2.3484×10⁻³ N in the z-direction, while the x and y components of the force are zero.
To calculate the force exerted on the particle by the magnetic field, we can use the formula for the magnetic force on a moving charged particle:
F⃗ = q (v⃗ × B⃗)
where q is the charge of the particle, v⃗ is its velocity, and B⃗ is the magnetic field.
Given:
q = -1.24×10⁻⁸ C (charge of the particle)
v⃗ = (4.19×10⁴ m/s)i^ + (-3.85×10⁴ m/s)j^ (velocity of the particle)
B⃗ = (1.90 T)k^ (magnetic field)
Calculating the force:
F⃗ = q (v⃗ × B⃗)
= (-1.24×10⁻⁸ C) [(4.19×10⁴ m/s)i^ + (-3.85×10⁴ m/s)j^] × (1.90 T)k^
The cross product of v⃗ and B⃗ can be calculated as follows:
i^ × k^ = j^ (unit vectors perpendicular to each other)
j^ × i^ = -k^ (unit vectors perpendicular to each other)
Therefore:
F⃗ = (-1.24×10⁻⁸ C) (-3.85×10⁴ m/s)(1.90 T)
= (2.3484×10⁻³ N)k^
The force exerted on the particle by the magnetic field has only a z-component, which is -2.3484×10⁻³ N. The x and y components are both zero.
So, the components of the force separated by commas are 0, 0, and -2.3484×10⁻³ N.
To know more about the force exerted refer here :
https://brainly.com/question/8737101#
#SPJ11
a material is made of molecules of mass 2.0×10−26kg. there are 2.3×1029 of these molecules in a 2.0-m3 volume.
What is the density of the material?
The density of the material is 2.3 × [tex]10^3[/tex] kg/m³.
Mass = (2.0 × [tex]10^{-26}[/tex] kg/molecule) × (2.3 ×[tex]10^{29}[/tex] molecules) = 4.6 × [tex]10^3[/tex] kg
The volume of the material is given as 2.0 [tex]m^3[/tex]. Now we can calculate the density:
density = mass / volume = 4.6 ×[tex]10^3[/tex] kg / 2.0 [tex]m^3[/tex] = 2.3 × [tex]10^3[/tex]kg/[tex]m^3[/tex]
Density is a physical quantity that represents the amount of mass per unit volume of a substance. It is typically denoted by the Greek letter ρ (rho) and has units of kilograms per cubic meter (kg/m³) in the SI system of units. Density is a fundamental concept in physics that helps us understand the behavior of matter
The density of a substance can be calculated by dividing its mass by its volume. It is an important property in many areas of physics, such as materials science, fluid mechanics, and thermodynamics, because it is closely related to the substance's behavior under different conditions. For example, in fluid mechanics, density is a key parameter in determining the buoyancy of an object in a fluid.
To learn more about Density visit here:
brainly.com/question/29775886
#SPJ4
when a gas is compressed, it absorbs 0.84 kj of energy and 674 j of work is done on the gas. calculate the internal energy change, in units of kj, of the surroundings.
The internal energy change of the surroundings is -1.514 kJ.
To calculate the internal energy change of the surroundings when a gas is compressed, we'll use the given values for energy absorption and work done on the gas.
It is given that,
Energy absorbed by the gas = 0.84 kJ
Work done on the gas = 674 J
First, convert the work done on the gas to kJ:
674 J * (1 kJ / 1000 J) = 0.674 kJ
Now, we'll apply the principle of conservation of energy. Since the gas absorbs energy and has work done on it, the surroundings must lose that amount of energy.
Internal energy change of the surroundings = -(Energy absorbed by the gas + Work done on the gas)
Internal energy change of the surroundings = -(0.84 kJ + 0.674 kJ)
Calculate the internal energy change of the surroundings:
Internal energy change of the surroundings = -1.514 kJ
As a result, the environment's internal energy change is -1.514 kJ.
Learn more about "internal energy": https://brainly.com/question/17136958
#SPJ11
the earth’s magnetic field is approximately 0.000050 t. what is the energy in 1.3 m3 of that field?
The energy in 1.3 m3 of that field is approximately 1.29 × 10^-7 Joules.
To calculate the energy in a magnetic field, we need to use the formula for magnetic energy density (u) which is given by:
u = (B²) / (2μ₀)
where B is the magnetic field strength (0.000050 T in this case) and μ₀ is the permeability of free space (4π × 10^-7 T·m/A).
First, calculate the magnetic energy density:
u = (0.000050²) / (2 × 4π × 10^-7)
u ≈ 9.95 × 10^-8 J/m³
Now, to find the energy in 1.3 m³ of that field, multiply the magnetic energy density by the volume:
Energy = u × volume
Energy = 9.95 × 10^-8 J/m³ × 1.3 m³
Energy ≈ 1.29 × 10^-7 J
So, the energy in 1.3 m³ of the Earth's magnetic field is approximately 1.29 × 10^-7 Joules.
Learn more about energy here:
https://brainly.com/question/2409175
#SPJ11
a small, square loop carries a 42 a current. the on-axis magnetic field strength 47 cm from the loop is 5.2 nt . What is the edge length of the square?
The edge length of the square loop is 0.029 m.
The magnetic field at a point on the axis of a square loop of edge length a, carrying a current I, at a distance x from the center of the loop is given by the equation:
B = [tex](μ0/4π) * (2I/a^2) * f(x/a)[/tex]
where μ0 is the permeability of free space and f(x/a) is a dimensionless function that depends on the distance x/a. For a point on the axis at a distance x from the center of the loop, f(x/a) is given by:
f(x/a) = [([tex]√(1+y^2))/y] - (1/y^2) - [(1-y^2)/y^2(1+y^2)^(3/2[/tex])]
where y = x/a + 1/2.
Substituting the given values, we get:
5.2 × 10[tex]^(-9) T = (μ0/4π) * (2(42 A)/a^2) * f(0.47[/tex]/a)
Solving for f(0.47/a) gives:
f(0.47/a) = 1.00
Substituting this value into the previous equation, we get:
5.2 × 10[tex]^(-9) T = (μ0/4π) * (2(42 A)/a^2[/tex])
Solving for a gives:
a = √ [tex][(μ0I)/(2πB)][/tex]
Substituting the values of μ0, I, and B, we get:
a = √[([tex]4π × 10^(-7) T·m/A) × (42 A)/(2π × 5.2 × 10^(-9)[/tex]T)] = 0.029 m
Therefore, the edge length of the square loop is 0.029 m.
learn more about magnetic fields here:
https://brainly.com/question/14411049
#SPJ4
If a ball bounces off a wall so that its velocity coming back has the same magnitude it had prior to bouncing,
a. Is there a change in the momentum of the ball? Explain.
b. Is there an impulse acting on the ball during its collision with the wall? Explain.
Yes, there is a change in the momentum of the bal bouncings off a wall so that its velocity coming back has the same magnitude it had prior to bouncing. Option b Yes, there is an impulse acting on the ball during its collision with the wall.
a. Yes, there is a change in the momentum of the ball. Momentum is a vector quantity that depends on both mass and velocity. Although the magnitude of the velocity is the same before and after the collision, the direction has changed (the ball is moving away from the wall after bouncing). This change in direction results in a change in the momentum of the ball.
b. Yes, there is an impulse acting on the ball during its collision with the wall. Impulse is the change in momentum and is equal to the force acting on the object multiplied by the time the force is applied. Since there is a change in momentum as the ball bounces off the wall, a force must have acted on the ball during the collision, resulting in an impulse.
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ11
To increase the current density, J in a wire of length l and diameter D, you can
(a) decrease the potential difference between the two ends of the wire
(b) increase the potential difference between the two ends of the wire
(c) decrease the magnitude of the electric field in the wire
(d) heat the wire to a higher temperature
WHY?
The correct answer is option (b) increase the potential difference between the two ends of the wire.
To increase the current density, J in a wire of length l and diameter D, you would need to increase the potential difference between the two ends of the wire, as current density is directly proportional to potential difference. The equation for current density is J = I/A, where I is the current flowing through the wire and A is the cross-sectional area of the wire. Since the cross-sectional area of the wire remains constant, the only way to increase current density is to increase the current, which in turn requires an increase in potential difference.
Decreasing the potential difference between the two ends of the wire (option a) would result in a decrease in current density. Similarly, decreasing the magnitude of the electric field in the wire (option c) would also result in a decrease in current density, as electric field is directly proportional to potential difference. Heating the wire to a higher temperature (option d) may increase the resistance of the wire, which would in turn decrease the current and current density.
Learn more about potential difference here:
https://brainly.com/question/12198573
#SPJ11
The magnetic flux through a coil of wire containing two loops changes at a constant rate from-52Wb to +70Wb in 0.77s .
What is the magnitude of the emf induced in the coil?
Express your answer to two significant figures and include the appropriate units.
The coil's induced emf is measured at a value of 1386T. According to Faraday's rule, the quantity of, or the amount of induced emf, is equal to the number of coil turns times sub B over t, where sub B, as we've seen, can be represented as B times A.
How much induced emf does the coil experience when the field changes?The magnetic flux rate of change divided by the coil's turn count yields the induced emf in a coil.
Change of magnetic flux through a coil of wire = B -A
= 70Wb - 52Wb
= 18Wb
The magnetic flux in one turn of the coil = ϕ = BA
= 18*77
=1386T
To know more about magnetic flux visit:-
https://brainly.com/question/30858765
#SPJ1
Two solenoids haven windings per meter and currenti. One solenoid has diameter D and the other has diameter d- D/2. The direction of the current in each solenoid is shown in the figure. 1) The small solenoid is placed inside the large solenoid so that their long axes lie together. What is the magnetic field at the center of the solenoids? Net magnetic field is positive Net magnetic field is negative. Net magnetic field is zero Suonithoe o submissons for this uestion only You currently have 0 submissions for this question. Only 2 submission are allowed. You can make 2 more submissions for this question. (Survey Question) 2) Briefly explain your answer to the previous question Submit
At the solenoid's core, there is no net magnetic field. This is due to the fact that the magnetic field within each solenoid is constant and oriented along the solenoid's axis.
1. The smaller solenoid at the center of the bigger solenoid will produce a magnetic field that is in one direction, while the larger solenoid will produce a magnetic field that is in the opposite direction.
2. The aforementioned reasoning is predicated on the fact that a solenoid's magnetic field is homogenous and directed along its axis. This is because the magnetic fields produced by each turn of the wire in the solenoid add up because they all produce a magnetic field facing the same way.
Learn more about magnetic field visit: brainly.com/question/14411049
#SPJ4
Correct Question:
Two solenoids haven windings per meter and current. One solenoid has a diameter D and the other has a diameter of d- D/2. The direction of the current in each solenoid is shown in the figure. 1) The small solenoid is placed inside the large solenoid so that its long axes lie together. What is the magnetic field at the center of the solenoids? The net magnetic field is the positive Net magnetic field is negative. The net magnetic field is zero
Particles q_{1} = 8mu*C q_{2} = 3.5mu*C and q_{3} = - 2.5mu*C are in a line. Particles q_{1} and q_{2} are separated by 0.10 m and particles q_{2} and q_{3} are separated by 0.15 m. What is the net force on particle g_{1} ? Remember: Negative forces (-F) will point Left Positive forces (F) will point Right
The vector sum of the forces imposed by the other two particles is the net force acting on particle [tex]q_1[/tex]. By applying Coulomb's law, we may determine the size of the force [tex]q_2[/tex] has on [tex]q_1[/tex]:
What is particles?A method called an experiment is used to test a hypothesis or educated estimate in order to confirm or deny it. In order to investigate novel occurrences or to confirm and validate accepted theories or principles, experiments are carried out.
[tex]F_{12} = (k*q1*q2)/(0.10m)^2\\\\F_{12}=(8.99*10^9 N*m^2/C^2)*(8*10^{-6} C)*(3.5*10^{-6} C)/(0.10m)^2\\\\F_{12}=2.8*10^{-4} N[/tex]
In a similar manner, we can determine the strength of the force that [tex]q_3[/tex] has on [tex]q_1[/tex]:
The vector sum of the two forces equals the net force acting on [tex]q_1[/tex]. The force due to [tex]q_2[/tex] is directed to the right whereas the force due to [tex]q_3[/tex] is pointing to the left because [tex]q_2[/tex] has a positive charge and [tex]q_3[/tex] has a charge that is negatively charged. Consequently, the net force on [tex]q_1[/tex] is equal to and is to the right.
[tex]F_{net}=F_{12 }+ F_{13}\\\\F_{net}=2.8*10^{-4 N} + (-1.9*10^{-4 N})\\\\F_{net}=0.9*10^{-4} N.[/tex]
To learn more about particles, visit:
brainly.com/question/27911483
#SPJ1
A dish antenna having a diameter of 20.0 m receives (at normal incidence) a radio signal from a satellite at altitude of 35,786 km from Earth's surface and emits electromagnetic wave equally in all directions. The radio signal is a continuous sinusoidal wave with amplitude E max
= 20.0μV/m (a) What is the amplitude of the magnetic field in this wave? (b) What is the intensity of the radiation received by this antenna? (c) What is the power received by the antenna? (d) What is the total electromagnetic power emitted by the satellite?
(a) The amplitude of the magnetic field is 6.67 x [tex]10^-^1^1[/tex] T.
(b) The intensity of the radiation received by the antenna is 1.77 x [tex]10^-^2^0[/tex] W/m².
(c) The power received by the antenna is 5.57 x [tex]10^-^1^8[/tex] W.
(d) The total electromagnetic power emitted by the satellite is also 5.57 x [tex]10^-^1^8[/tex] W.
How to find the amplitude of the magnetic field?(a) The amplitude of the magnetic field (B) in an electromagnetic wave is related to the amplitude of the electric field (E) by the equation:
B = E/c
where c is the speed of light in vacuum.
So, the amplitude of the magnetic field in this wave is:
B = (20.0 μV/m)/(3.00 x [tex]10^8[/tex] m/s)
B = 6.67 x [tex]10^-^1^1[/tex] T
How to find the intensity of electromagnetic radiation?(b) The intensity of electromagnetic radiation is given by the equation:
I = (1/2)ε0c[tex]E^2[/tex]
where ε0 is the permittivity of free space, c is the speed of light in vacuum, and E is the amplitude of the electric field.
So, the intensity of the radiation received by the antenna is:
I = (1/2)(8.85 x [tex]10^-^1^2[/tex] F/m)(3.00 x [tex]10^8[/tex] m/s)(20.0 x [tex]10^-^6[/tex] V/m)²
I = 1.77 x [tex]10^-^2^0[/tex] W/m²
How to find the power received by the antenna?(c) The power received by the antenna is given by the equation:
P = AI
where A is the area of the antenna.
The area of the dish antenna is:
A = πr² = π(10.0 m)² = 314 m²
So, the power received by the antenna is:
P = (314 m²)(1.77 x [tex]10^-^2^0[/tex] W/m²)
P = 5.57 x [tex]10^-^1^8[/tex] W
How to find the total electromagnetic power?(d) The total electromagnetic power emitted by the satellite is equal to the power received by the antenna, because the antenna is receiving all of the power that the satellite is emitting in its direction.
So, the total electromagnetic power emitted by the satellite is also 5.57 x [tex]10^-^1^8[/tex] W.
Learn more about Magnetic field
brainly.com/question/11514007
#SPJ11
The net force on an object is? O the force of friction acting on it. O the combination of all forces acting on it. O most often its weight
The net force on an object is the combination of all forces acting on it.
This includes not only the force of friction acting on it but also other forces such as gravity, applied force, and air resistance.
However, in some cases, such as when an object is at rest or moving at a constant velocity, the net force may be zero, meaning that all the forces are balanced. In such cases, the force of friction acting on it may be equal and opposite to the other forces.
As for weight, it is a force caused by gravity and is one of the factors that contribute to the net force on an object.
To know more about net force, refer here:
https://brainly.com/question/29769022#
#SPJ11
compare the kinetic energy of a 20,500 kg truck moving at 145 km/h with that of an 83.5 kg astronaut in orbit moving at 27,000 km/h. ketruck keastronaut =
The kinetic energy of the truck is about 0.0007% of the kinetic energy of the astronaut in orbit.
How to compare the kinetic energy of two objects with different masses and velocities?To compare the kinetic energy of the truck and the astronaut, we can use the formula for kinetic energy:
[tex]KE = 1/2 * m * v^2[/tex]
where KE is the kinetic energy, m is the mass, and v is the velocity.
For the truck, the mass is 20,500 kg and the velocity is 145 km/h = 40.28 m/s (we need to convert km/h to m/s to use the formula). So, the kinetic energy of the truck is:
[tex]KEtruck = 1/2 * 20,500 kg * (40.28 m/s)^2 = 16,553,444 J[/tex]
For the astronaut, the mass is 83.5 kg and the velocity is 27,000 km/h = 7,500 m/s. So, the kinetic energy of the astronaut is:
[tex]KEastronaut = 1/2 * 83.5 kg * (7,500 m/s)^2 = 23,587,812,500 J[/tex]
Therefore, the kinetic energy of the astronaut in orbit is much greater than that of the truck. The ratio of their kinetic energies is:
[tex]KEtruck/KEastronaut = 16,553,444 J / 23,587,812,500 J = 7.01 *10^-4[/tex]
This means that the kinetic energy of the truck is about 0.0007% of the kinetic energy of the astronaut in orbit.
Learn more about Kinetic energy
brainly.com/question/999862
#SPJ11
A bicycle with tires 68 cm in diameter travels 8.0 km. How many revolutions do the wheels make?
The circumference of a circle is given by the formula C = πd, where C is the circumference and d is the diameter of the circle. Therefore, the circumference of each tire is:
C = πd = π(68 cm) ≈ 213.63 cm
To find the number of revolutions made by the wheels, we need to know the distance traveled by the bicycle in terms of the circumference of the wheels. We can use the formula:
distance = number of revolutions * circumference
Rearranging this formula, we get:
number of revolutions = distance / circumference
Substituting the given values, we get:
number of revolutions = 8.0 km / (2π × 0.68 km) ≈ 58.5 revolutions
Therefore, the wheels of the bicycle make approximately 58.5 revolutions.
Learn more about diameter here:
https://brainly.com/question/5501950
#SPJ11
An evanescent field at angular frequency w = 1015rad/s is created via total internal reflection at the interface between two different media with refractive index n1 and n2, where n1=4, and n2=2. The incident angle 01=80°. We can define the propagation direction of the evanescent field as the x-direction, and the z-direction is normal to the interface between the two media, and therefore the evanescent field wave function can be expressed as Ēei(kxx+kzz-wt).(a) Should the incident light come from the medium with n1 or the medium with n2 to undergo total internal reflection?(b) Is the evanescent field in the medium with n1 or the medium with n2?(c) Calculate the values for kx and kz in the medium in which the field is evanescent.
(a) The critical angle for total internal reflection is given by sin(θc) = n2/n1, where θc is the angle of incidence at which total internal reflection occurs.
Substituting the given values of n1 and n2, we get sin(θc) = 1/2. Solving for θc, we get θc = 30°. Since the given incident angle 01 is greater than θc, the incident light should come from the medium with n1 to undergo total internal reflection.
(b) The evanescent field is present in both media, but its magnitude decays exponentially with distance from the interface. The amplitude of the evanescent field in medium 1 (with refractive index n1) is given by E1 = Ēei(kx x + k1z z - wt), where k1 = w/n1c is the wave vector in medium 1, c is the speed of light in vacuum, and x and z are the coordinates along the x- and z-axes, respectively. Similarly, the amplitude of the evanescent field in medium 2 (with refractive index n2) is given by E2 = Ēei(kx x + k2z z - wt), where k2 = w/n2c is the wave vector in medium 2. Since the wave vector k is continuous across the interface, we have kx = k1x = k2x, where k1x and k2x are the x-components of the wave vectors in media 1 and 2, respectively. Therefore, the evanescent field is present in both media, but its decay rate (determined by the imaginary part of the wave vector) is different in each medium.
learn more abouT speed here:
https://brainly.com/question/13943409
#SPJ4
The density of gold is 19.0 times that . of , water weighing 34.0 N and submerge it in If you take a gold crown water; what will the buoyant force on the crown?
The buoyant force acting on the crown is also 100 N, according to the Archimedes' principle
The buoyant force on the gold crown can be calculated using the Archimedes' principle, which states that the buoyant force acting on an object immersed in a fluid is equal to the weight of the fluid displaced by the object.
The weight of the displaced water can be calculated using its volume and density, which is 34.0 N / 9.81 m/s² ≈ 3.46 kg.
The volume of the gold crown can be calculated using its weight and density, assuming that it is completely submerged in water. Let's assume the weight of the crown is 100 N, then its mass would be 100 N / 9.81 m/s² ≈ 10.19 kg. The volume of the crown can be calculated using its mass and density:
Volume = Mass / Density = 10.19 kg / (19.0 g/cm³ x 1000 cm³/m³) ≈ 0.000536 m³
The weight of the water displaced by the crown is equal to its own weight, which is 100 N.
To know more about buoyant force click on below link:
https://brainly.com/question/21990136#
#SPJ11
. If a car with velocity 2.0 m/s accelerates at a rate of 4.0 m/s2 for 2.5 seconds, what is its velocity at time t = 2.5 seconds? 12 m/s 2.0 m/s 16 m/s 8.0 m/s 4.0 m/s
The car's velocity at time t = 2.5 seconds is 12 m/s.
The final velocity is the velocity of an object at the end of a particular period of time.
The formula for final velocity is:
v=u+at
Here,
v is the final velocity
u is the initial velocity
a is the acceleration of the object
t is the time interval
Therefore,
Final velocity = Initial velocity + (Acceleration × Time)
In this case, "If a car with velocity 2.0 m/s" means the initial velocity is 2.0 m/s. The car "accelerates at a rate of 4.0 m/s²" and we want to find the velocity at time t = 2.5 seconds.
Using the formula:
Final velocity = 2.0 m/s + (4.0 m/s² × 2.5 s)
Final velocity = 2.0 m/s + (10 m/s)
Final velocity = 12 m/s
Know more about final velocity here,
https://brainly.com/question/23659048
#SPJ11
Suppose a planet is discovered orbiting a distant star. If the mass of the planet is 10 times the mass of the earth, and its radius is one-tenth the earth's radius, how does the escape speed of this planet compare with that of the earths?
10 * square root[(2 * G * M) / R] is the escape speed of this planet compare with that of the earths
The escape speed of a planet is directly proportional to the square root of its mass and inversely proportional to the square root of its radius. Therefore, for the planet discovered with 10 times the mass of Earth and one-tenth the radius, the escape speed can be calculated as follows:
Escape speed of new planet = square root[(2 * gravitational constant * mass of new planet) / radius of new planet]
Escape speed of Earth = square root[(2 * gravitational constant * mass of Earth) / radius of Earth]
Substituting the given values, we get:
Escape speed of new planet = square root[(2 * G * 10M) / (0.1R)]
Escape speed of Earth = square root[(2 * G * M) / R]
Where G is the gravitational constant, M is the mass of Earth, and R is the radius of Earth.
Simplifying these equations, we get:
Escape speed of new planet = 10 * square root[(2 * G * M) / R]
This shows that the escape speed of the new planet is 10 times greater than that of Earth. Therefore, it would take much more energy to launch a spacecraft from this planet into space.
To learn more about escape speed click here
brainly.com/question/28608063
#SPJ11
the acceleration of gravity on surface of the moon is 1/6 of that on the surface of the earth. how long would a pendulum have to be in order to have a period of 1.7 s on the moon? express your answer in meters to three significant digits. m
The length of the pendulum on the moon would need to be approximately 0.276 meters (to three significant digits) to have a period of 1.7 seconds.
The period (T) of a pendulum is given by the equation:
T = 2π√(L/g)
g(moon) = 1/6 g(earth)
Substituting this into the equation for T, we get:
T = 2π√(L/g(moon))
T = 2π√(L/(1/6 g(earth)))
T = 2π√(6L/g(earth))
1.7 s = 2π√(6L/9.81 m/s^2)
2.89 s^2 = 24π^2 L/9.81 m/s^2
L = (2.89 s^2 × 9.81 m/s^2)/(24π^2)
L ≈ 0.223 m
Therefore, the pendulum would have to be approximately 0.223 meters long in order to have a period of 1.7 s on the moon. To find the length of a pendulum on the moon with a period of 1.7 seconds, we'll use the formula for the period of a simple pendulum: T = 2π√(L/g), where T is the period, L is the length, and g is the acceleration due to gravity.
To know more about pendulum visit :-
https://brainly.com/question/14759840
#SPJ11
A 4-wheel truck with a total mass of 4000 kg having a velocity of 30 m/s tries to stop in 2 seconds. How much force is being exerted to each wheel? Solve the problem and show all calculations/equations.
The amount of force being exerted to each wheel when the 4-wheel truck with a total mass of 4000 kg tries to stop is 15,000 N.
First, we'll find the acceleration (a) using the formula:
vf = vi + (a * t)
Rearranging for acceleration, we get:
a = (vf - vi) / t
Substituting the values:
a = (0 - 30) / 2 = -15 m/s²
Now, we'll find the total force (F) using the formula:
F = m * a
Substituting the values:
F = 4000 * -15 = -60,000 N (the negative sign indicates the force is acting in the opposite direction of the initial motion)
Finally, we'll find the force exerted on each wheel by dividing the total force by the number of wheels:
Force per wheel = F / 4 = -60,000 / 4 = -15,000 N
The negative sign indicates that the force is in the opposite direction of the initial velocity (i.e. the force is acting to slow the wheel down). So, each wheel is exerting a force of 15,000 N to stop the truck in 2 seconds.
Learn more about acceleration here; https://brainly.com/question/26246639
#SPJ11
If the magnetic field in a traveling electromagnetic wave has a maximum value of 16.5 nT, what is the maximum value of the electric field associated with it?
Near this particular time, the electric field of the evector of sinusoidal electromagnetic waves is 300 V/m at its highest value.
What is the magnetic field's greatest and minimum?(i) On a current element's direction, the electromagnetic field is at its lowest point, or zero. (ii) The current element's magnetism is strongest in a plane that passes through it and is parallel to its axis.
What are the magnetic flux's greatest and lowest values?The highest and lowest magnetic field conditions If the angle among the magnetization line on the surface is 0, the flux of magnetic energy obtained is at its maximum. When the angle among the magnetization line and the outermost layer is ninety degrees, the flux of magnetic energy produced is at its lowest.
To know more about waves visit:
https://brainly.com/question/25954805
#SPJ1
Memory impairments observed in amnesic individuals are MOST commonly observed in the domain of:
A) classical conditioning.
B) perceptual priming.
C) skills memory.
D) declarative memory.
Memory impairments observed in amnesic individuals are MOST commonly observed in the domain of declarative memory. This is because declarative memory involves the conscious recollection of facts and events, which is often affected in cases of amnesia. So the correct option is D.
Declarative memory is a type of long-term memory that involves the conscious recall of factual information, such as events, names, and facts. This type of memory is also referred to as explicit memory because it involves the conscious and intentional retrieval of information. Amnesic individuals typically have difficulty with declarative memory tasks, such as recalling specific events or facts. They may also have difficulty learning and retaining new information.
Learn more about declarative memory: https://brainly.com/question/9326428
#SPJ11