A 0.3389 g sample of an unknown acid requires 41.02 mL of the standardized NaOH for neutralization to a phenolphthalein end point
a. How many moles of OH- are used?
b. How many moles of H+ are there in the solid acid?
c. What is the equivalent mass, in grams, of the unknown acid?

K2CrO4 solution would be yellow in color. Yes, a color change will be observed when sulfuric acid (H2SO4) is added to the solution. Yes, a color change will be observed when sodium hydroxide (NaOH) is added to the solution.

a. A K2CrO4 solution would be yellow in color because it contains the CrO4^2- ion.
b. Yes, a color change will be observed when sulfuric acid (H2SO4) is added to the solution. The addition of H2SO4 increases the concentration of H^+ ions, causing the reaction to shift to the right, towards the formation of Cr2O7^2- ions, which are orange. The color change occurs as the equilibrium shifts, producing more of the orange Cr2O7^2- ions.
c. Yes, a color change will be observed when sodium hydroxide (NaOH) is added to the solution. NaOH is a strong base, which reacts with the H^+ ions to form water (H2O), thus decreasing the concentration of H^+ ions. This causes the reaction to shift to the left, favoring the formation of yellow CrO4^2- ions. The color change occurs as the equilibrium shifts, producing more of the yellow CrO4^2- ions.

a. A K2CrO4 solution would be yellow.
b. Yes, a color change will be observed. The addition of sulfuric acid will shift the equilibrium to the left, favoring the formation of more yellow CrO4^2- ions. This is because the H+ ions in sulfuric acid will react with the Cr2O7^2- ions, decreasing their concentration and therefore pushing the equilibrium towards the left.
c. Yes, a color change will be observed. The addition of sodium hydroxide will shift the equilibrium to the right, favoring the formation of more orange Cr2O7^2- ions. This is because the OH- ions in sodium hydroxide will react with the H+ ions in the equation, decreasing their concentration and therefore pushing the equilibrium towards the right.

Learn more about sodium hydroxide here: brainly.com/question/29327783

#SPJ11

K2CrO4 solution would be yellow in color. Yes, a color change will be observed when sulfuric acid (H2SO4) is added to the solution. Yes, a color change will be observed when sodium hydroxide (NaOH) is added to the solution.

a. A K2CrO4 solution would be yellow in color because it contains the CrO4^2- ion.
b. Yes, a color change will be observed when sulfuric acid (H2SO4) is added to the solution. The addition of H2SO4 increases the concentration of H^+ ions, causing the reaction to shift to the right, towards the formation of Cr2O7^2- ions, which are orange. The color change occurs as the equilibrium shifts, producing more of the orange Cr2O7^2- ions.
c. Yes, a color change will be observed when sodium hydroxide (NaOH) is added to the solution. NaOH is a strong base, which reacts with the H^+ ions to form water (H2O), thus decreasing the concentration of H^+ ions. This causes the reaction to shift to the left, favoring the formation of yellow CrO4^2- ions. The color change occurs as the equilibrium shifts, producing more of the yellow CrO4^2- ions.

a. A K2CrO4 solution would be yellow.
b. Yes, a color change will be observed. The addition of sulfuric acid will shift the equilibrium to the left, favoring the formation of more yellow CrO4^2- ions. This is because the H+ ions in sulfuric acid will react with the Cr2O7^2- ions, decreasing their concentration and therefore pushing the equilibrium towards the left.
c. Yes, a color change will be observed. The addition of sodium hydroxide will shift the equilibrium to the right, favoring the formation of more orange Cr2O7^2- ions. This is because the OH- ions in sodium hydroxide will react with the H+ ions in the equation, decreasing their concentration and therefore pushing the equilibrium towards the right.

Learn more about sodium hydroxide here: brainly.com/question/29327783

#SPJ11

The pH of the buffer solution is slightly basic due to the presence of a weak base.

To determine the pH of the buffer solution, we need to use the Henderson-Hasselbalch equation: pH = pKa + log ([A-]/[HA]), where pKa is the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, the weak base and its conjugate acid act as the acid and base components of the buffer, respectively. The pKa can be calculated using the expression pKa = -log(Ka), where Ka is the equilibrium constant for the dissociation of the weak acid.

Plugging in the given values, we get a pKa of 9.17. Then, we can substitute the concentrations of the weak base and its conjugate acid into the Henderson-Hasselbalch equation and solve for the pH, which turns out to be 9.59.

To know more about buffer solution refer here:

https://brainly.com/question/24262133#

#SPJ11

The level by capacitance measurements can be determined using both point and continuous methods.

In capacitance measurements, the level of a substance is determined by measuring the change in capacitance caused by the substance. The point method involves using a single probe to detect a specific level, whereas the continuous method uses multiple probes or a continuous probe to measure various levels within a tank or container.

In the point method, a signal is generated when the substance reaches the probe, indicating that the desired level has been reached.

In the continuous method, the capacitance measurements are continuously recorded, providing real-time information about the substance's level. Both methods are useful depending on the application and the desired accuracy of the measurements.

To know more about capacitance click on below link:

https://brainly.com/question/28445252#

#SPJ11

The Lewis model is a method to predict the formation of a chemical bond between atoms. It involves determining the number of valence electrons in each atom and then pairing them up to form a bond.

Sr has 2 valence electrons, while S has 6 valence electrons. To form a compound, Sr must lose its two valence electrons, while S must gain two electrons. The resulting compound will have the same number of positive and negative charges, which will cancel out. Therefore, the chemical formula for the compound formed between Sr and S is SrS.

Mg has 2 valence electrons, while Cl has 7 valence electrons. To form a compound, Mg must lose its two valence electrons, while Cl must gain one electron. However, Cl cannot gain two electrons to form a stable compound. Therefore, Mg must lose both of its valence electrons to form a compound with Cl. The resulting compound will have one positive charge (from Mg) and one negative charge (from Cl), which will cancel out. Therefore, the chemical formula for the compound formed between Mg and Cl is MgCl2.

Na has 1 valence electron, while I has 7 valence electrons. To form a compound, Na must lose its valence electron, while I must gain one electron. The resulting compound will have one positive charge (from Na) and one negative charge (from I), which will cancel out. Therefore, the chemical formula for the compound formed between Na and I is NaI.

Learn more about Lewis structure here:

https://brainly.com/question/20300458

#SPJ1

Benzophenone is less polar than benzhydrol because it contains a carbonyl group (C=O) which is a polar functional group, but the two phenyl rings on either side of the carbonyl group cancel out the polarity due to their symmetrical arrangement. On the other hand, benzhydrol contains an OH group which is a highly polar functional group that increases the overall polarity of the molecule.

Therefore, benzhydrol is more polar than benzophenone.
Benzophenone is less polar than benzhydrol because benzophenone has a ketone functional group (C=O), while benzhydrol has an alcohol functional group (OH). The alcohol group in benzhydrol is capable of forming stronger hydrogen bonds due to the presence of an oxygen-hydrogen bond (O-H), making it more polar than benzophenone.

Visit here to learn more about benzophenone brainly.com/question/31408222

#SPJ11

A proton (H+) is transported from the acid to the base in the first step of an acid-base reaction.

Step 2: NH4+ and Br- are the byproducts of the acid-base interaction between HBr and NH3.

Step 3:

HBr + NH3 → NH4+ + Br-

Curved arrow mechanism:

A new bond between the nitrogen and hydrogen atoms is created when the lone pair of electrons on the nitrogen atom of NH3 attack the hydrogen atom of HBr. The link between H and Br also breaks at this point, with the electrons flowing in the direction of the Br atom. NH4+ and Br- ions are produced as a consequence.

[tex]H Br H Br\ / + NH3 → H-NH_3+ |C=N C=N/ \ |H Br H Br[/tex]

Step 4: Because NH3 is a stronger base than HBr is an acid, the direction of equilibrium favours the creation of NH4+ and Br- ions.

to know more about the acid-base reaction here:

brainly.com/question/15220646

#SPJ1

The equilibrium hole concentration (p) is 2.25*10^{3 }cm^-3.

In the given information, the concentration of electrons (No) is 2*10^{15} cm3 and the concentration of acceptor impurities (NA) is 3* 10^{17} cm3. Since the dopants are fully ionized, the concentration of holes (p) equals the concentration of acceptor impurities (NA).
To find the equilibrium electron concentration (n), we use the following formula:
n_i^2 = No * NA
Where n_i is the intrinsic carrier concentration. At room temperature, n_i = 1.5*10^{10} cm^{-3}.
Substituting the given values, we get:
(1.5*10^{10})^{2 }= 2*10^{15} * 3*10^{17}
n = sqrt((2*10^{15} * 3*10^{17})}{1.5*10^10) }
n = 6*10^{6} cm^{-3}
Therefore, the equilibrium electron concentration (n) is 6*10^{6} cm^{-3} and the equilibrium hole concentration (p) is 3*10^{17} cm^{-3}.
For the second part of the question, if the concentration of electrons (n) changes to 10^{17} cm^{-3}, we can use the following formula:
n * p = n_i^2
Substituting the given values, we get:
10^17 * p = (1.5*10^10)^2
p = \frac{(1.5*10^10)^{2}}{ 10^{17}}
p = 2.25*10^{3 }cm^{-3}
Therefore, the equilibrium hole concentration (p) is 2.25*10^{3} cm^{-3}.

learn more about  equilibrium Refer:  https://brainly.com/question/30694482

#SPJ11

The compound that is antiaromatic is option (iii). Anti-aromatic compounds are characterized by having a planar, cyclic ring of atoms with a total of 4n electrons in the π system, where n is any integer.

The electrons in the π system interact in such a way that the molecule is destabilized, making it less stable than a non-aromatic or even an aromatic compound.

Option (iii) is a planar cyclic ring with 8 π electrons in its π system, which makes it antiaromatic.

The compound has two double bonds and two lone pairs of electrons on the nitrogen atoms, and it follows the Hückel's rule (4n+2) for aromaticity, but since it has a total of 8 π electrons, it does not meet the requirements to be aromatic.

Option (i) has 10 π electrons, making it aromatic. Option (ii) has 6 π electrons, making it also aromatic.

Option (iv) has 12 π electrons, making it non-aromatic. Therefore, the correct answer is option (iii), which is antiaromatic.

To know more about antiaromatic, refer here:

https://brainly.com/question/30215728#

#SPJ11

Answer:

higher the temp higher the melting rate

Explanation:

the higher the temp the more energy is put into the system in order to break intermolecular forces between molecules and allow it to change state.

Fe becomes Fe+2 + 2e or Fe+3 + 3e, K becomes K+1 + 1e, and Be becomes Be+2 + 2e. As a result of their incomplete d-orbitals in their valence shells, which may accept various quantities of electrons, transition metals frequently have more than one oxidation state.

One of the two earliest transition metal period elements with a single oxidation state is scandium. The oxidation states of the other elements range from two to at least four.

If an atom's oxidation number rises, it is said to be oxidised; if it falls, it is said to be reduced. The reducing agent is the atom that is being oxidised.

To know more about transition metals visit:-

https://brainly.com/question/30551806

#SPJ1

when both L and C are doubled, the new angular frequency of oscillation is half of the original angular frequency.

In a pure LC circuit, the angular frequency of oscillation (ω) is given by the formula:
ω =\frac{1}{\sqrt{(LC)}}
Where L is the inductance and C is the capacitance.
Now, you've mentioned that both L and C are doubled. So, the new values of L and C will be:
L_new = 2L
C_new = 2C
Let's find the new angular frequency of oscillation (ω_new) using the same formula:
ω_new =\frac{ 1}{\sqrt(L_new * C_new)}
Substitute the new values of L and C:
ω_new = \frac{1}{\sqrt((2L) * (2C))}
Factor out the constant 2 from the square root:
ω_new = \frac{1}{\sqrt(4 * LC)}
Since √4 = 2, we can rewrite the equation as:
ω_new =\frac{ 1}{(2 * \sqrt(LC))}
Recall that the original angular frequency (ω) is given by:
ω =\frac{ 1}{\sqrt(LC)}
Comparing both equations, we find:
ω_new = ω/2

learn more about oscillation Refer: https://brainly.com/question/28994371

#SPJ11

when both L and C are doubled, the new angular frequency of oscillation is half of the original angular frequency.

In a pure LC circuit, the angular frequency of oscillation (ω) is given by the formula:
ω =\frac{1}{\sqrt{(LC)}}
Where L is the inductance and C is the capacitance.
Now, you've mentioned that both L and C are doubled. So, the new values of L and C will be:
L_new = 2L
C_new = 2C
Let's find the new angular frequency of oscillation (ω_new) using the same formula:
ω_new =\frac{ 1}{\sqrt(L_new * C_new)}
Substitute the new values of L and C:
ω_new = \frac{1}{\sqrt((2L) * (2C))}
Factor out the constant 2 from the square root:
ω_new = \frac{1}{\sqrt(4 * LC)}
Since √4 = 2, we can rewrite the equation as:
ω_new =\frac{ 1}{(2 * \sqrt(LC))}
Recall that the original angular frequency (ω) is given by:
ω =\frac{ 1}{\sqrt(LC)}
Comparing both equations, we find:
ω_new = ω/2

learn more about oscillation Refer: https://brainly.com/question/28994371

#SPJ11

360g is the mass of Argon present in a sample occupying 76.3L at 31C and 240 kPa of pressure.

A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics, it was widely considered to be tied to the amount of matter within a physical body.

It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.

P×V = n×R×T  

240 ×76.3= n×0.821×310

n=10 moles

mass = 10×36=360g

To know more about mass, here:

https://brainly.com/question/19694949

#SPJ1

The concentration of CO (g) at equilibrium is approximately 0.064 M.

We can use the equilibrium expression for the reaction:
Kc = [Ni (CO)4] / ([Ni][CO]^4)

We are given that [Ni (CO)4] = 0.85 M, and we can assume that the initial concentration of Ni (s) is negligible compared to the concentration of CO (g) and Ni (CO)4 (g).

Therefore, we can use the following approximation: [Ni] ≈ 0.

Substituting the given values and approximation into the equilibrium expression, we get:
5.0 x 104 M-3 = 0.85 M / (0 x [CO]^4)
Solving for [CO], we get:
[CO] = (0.85 M / 5.0 x 104 M-3)1/4
[CO] ≈ 0.086 M

Therefore, the concentration of CO (g) at equilibrium is approximately 0.086 M.

To find the concentration of CO (g) at equilibrium, we can use the expression for the equilibrium constant, Kc, which is:
Kc = [Ni(CO)₄] / ([Ni] * [CO]⁴)

Given that [Ni(CO)₄] = 0.85 M and Kc = 5.0 x 10⁴ M⁻³, we can solve for the concentration of CO:
5.0 x 10⁴ M⁻³ = 0.85 M / ([Ni] * [CO]⁴)

Since [Ni] is a solid, its concentration remains constant and does not affect the equilibrium, so we can rewrite the equation as: 5.0 x 10⁴ M⁻³ = 0.85 M / [CO]⁴

Now, solve for [CO]:
[CO]⁴ = 0.85 M / (5.0 x 10⁴ M⁻³)
[CO]⁴ ≈ 1.7 x 10⁻⁵ M

To find [CO], take the fourth root of the result:
[CO] = (1.7 x 10⁻⁵ M)^(1/4)
[CO] ≈ 0.064 M

Thus, the concentration of CO (g) at equilibrium is approximately 0.064 M.

Know more about equilibrium: brainly.com/question/30807709

#SPJ11

The estimated resistivity of copper is 1.75 x 10⁻⁸ Ωm, and the resistance of the wire at 100°C is 1.33 Ω.

To estimate the resistivity of copper, use the formula:

Resistivity (ρ) = (Resistance (R) × Cross-sectional area (A)) / Length (L)

First, calculate the cross-sectional area (A) of the wire:

A = π × (radius)² = π × (0.350 x 10⁻³ m)²≈ 3.85 x 10⁻⁷ m²
Now, find the resistivity:

ρ ≈ (1.15 Ω × 3.85 x 10⁻⁷ m²) / 27.0 m ≈ 1.75 x 10⁻⁸ Ωm

To find the resistance at 100°C, use the temperature coefficient of resistance formula:

R_T = R_0 × (1 + α × ΔT)

Where R_T is the resistance at temperature T, R_0 is the initial resistance, α is the temperature coefficient, and ΔT is the change in temperature.

ΔT = 100°C - 26°C = 74°C
α = 0.393% / °C = 0.00393 / °C

R_T = 1.15 Ω × (1 + 0.00393 / °C × 74°C) ≈ 1.33 Ω

To know more about temperature coefficient click on below link:

https://brainly.com/question/29083034#

#SPJ11

The species with the electron configuration [ar]3d4 is Chromium (Cr).

Chromium is a transition metal with atomic number 24 and is located in period 4 and group 6 of the periodic table. The electronic configuration of chromium is 1s2 2s2 2p6 3s2 3p6 4s1 3d5, but it is known to be more stable in its half-filled 3d orbital configuration, which is [ar]3d4. This configuration gives it unique properties such as hardness, resistance to corrosion and high melting and boiling points.

Chromium is widely used in various industries due to its unique properties, for example, it is used in the manufacturing of stainless steel, which is used in kitchen utensils, cutlery, and medical equipment. Chromium is also used in electroplating, tanning of leather, and in the production of pigments, dyes, and glass. Therefore, the knowledge of the electronic configuration of Chromium is important in understanding its properties and its various applications in industry. The species with the electron configuration [ar]3d4 is Chromium (Cr).

Learn more about transition metal  at:

https://brainly.com/question/2102444

#SPJ11

The citric acid cycle which is replenished is oxaloacetate.

The citric acid cycle intermediate that is replenished by these anaplerotic reactions is oxaloacetate.

Here's a step-by-step explanation:
1. Carboxylation of pyruvate: Pyruvate is converted into oxaloacetate through the addition of a carboxyl group, with the help of the enzyme pyruvate carboxylase.
2. Transamination of aspartate: Aspartate donates its amino group to alpha-ketoglutarate, forming glutamate and oxaloacetate.
3. Transamination of glutamate: Glutamate donates its amino group to oxaloacetate, forming aspartate and alpha-ketoglutarate.

In all three reactions, oxaloacetate is replenished, maintaining a sufficient concentration of this key intermediate for the citric acid cycle to continue.

Learn more about citric acid cycle

brainly.com/question/29857075

#SPJ11

To determine the temperature at which the energy estimated from the equipartition theorem is within 2 percent of the energy given by (€)=hcũ(eBhci – 1).

we need to use the equipartition theorem, which states that the average energy per degree of freedom in a system is kT/2, where k is the Boltzmann constant and T is the temperature.

We can equate this to the energy given by (€)=hcũ(eBhci – 1) and solve for T. However, since the energy is given as a percentage, we need to use a slightly different approach. Let's assume that the energy estimated from the equipartition theorem is E1 and the energy given by (€)=hcũ(eBhci – 1) is E2. We want to find the temperature at which |E1-E2|/E2 is within 2 percent.

Using the equipartition theorem, we can express E1 as kT/2 per degree of freedom. The energy given by (€)=hcũ(eBhci – 1) depends on the frequency of the oscillator and the strength of the magnetic field, but we can assume that it has a finite value. Therefore, we can write the condition as: |kT/2 - (€)| / (€) ≤ 0.02, Solving for T, we get: T = (2/ k) * |(€)| / ln[2(€)/(€+k(€))], where ln is the natural logarithm.

Substituting (€)=hcũ(eBhci – 1), we get: T = (2/ k) * |hcũ(eBhci – 1)| / ln[2hcũ(eBhci – 1)/(hcũ(eBhci – 1)+k(hcũ(eBhci – 1)))]
This gives us the temperature at which the energy estimated from the equipartition theorem is within 2 percent of the energy given by (€)=hcũ(eBhci – 1).

To know more about temperature click here

brainly.com/question/29072206

#SPJ11

The final pH of the buffer solution is 9.13 after adding 0.03 mol HCl to 0.500 L of a buffer solution containing 0.024 M NH₃ and 0.20 M NH₄Cl.

To calculate the final pH, we will use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). First, find the pKa value of the conjugate acid NH₄⁺, which is 9.25. Next, calculate the moles of NH₃ and NH₄Cl present in the buffer solution by multiplying their molarity by the volume (0.5 L).

Then, subtract the moles of HCl added from the moles of NH₃ and add them to the moles of NH₄Cl to find the new concentrations of NH₃ and NH₄Cl. Finally, plug the new concentrations into the Henderson-Hasselbalch equation to find the final pH.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The given statement is true. Tyrosine kinase receptors cannot initiate the transduction pathway until two receptors bind chemical messengers and move together forming a dimer.

Tyrosine kinases are important mediators of this signal transduction process, leading to cell proliferation, differentiation, migration, metabolism and programmed cell death. Tyrosine kinases are a family of enzymes, which catalyzes phosphorylation of select tyrosine residues in target proteins, using ATP.

The process occurs as follows:

1. Two chemical messengers bind to their respective receptor sites.
2. Upon binding, the receptors come together and form a dimer.
3. The dimerization activates the tyrosine kinase domains within the receptor.
4. This activation initiates the transduction pathway and leads to various cellular responses.

To learn more about transduction https://brainly.com/question/12836556

#SPJ11

In this case, the system gained 77.5 kJ of heat and did 63.5 kJ of work on the surroundings, resulting in a net increase in internal energy of 14 kJ.

To calculate the internal energy change (ΔU) of a system and determine if the process is endothermic or exothermic, we can use the first law of thermodynamics equation: ΔU = Q - W, where ΔU is the change in internal energy, Q is the heat absorbed or released by the system, and W is the work done by or on the system.

In this case, the system absorbs 77.5 kJ of heat (Q) and does 63.5 kJ of work (W) on the surroundings. So we can plug these values into the equation:

ΔU = Q - W
ΔU = 77.5 kJ - 63.5 kJ
ΔU = 14 kJ

The change in internal energy (ΔU) is positive, meaning that the internal energy of the system has increased. Since the system absorbed heat (positive Q) and the overall internal energy increased, the process is endothermic. In an endothermic process, the system gains energy from the surroundings, typically in the form of heat.

For more about internal energy:

https://brainly.com/question/14668303

#SPJ11

It would take 176 minutes for the amount of potassium-44 to decrease from 60.0 mg to 7.50 mg.

To calculate how long it would take for the amount of potassium-44 to decrease from 60.0 mg to 7.50 mg, we need to use the half-life of potassium-44, which is 22 minutes.

First, we need to determine how many half-lives have occurred during this time. We can do this by dividing the initial amount of potassium-44 by the final amount: 60.0 mg / 7.50 mg = 8.

So, 8 half-lives have occurred. Next, we need to determine the total amount of time it would take for 8 half-lives to occur. We can do this by multiplying the half-life by the number of half-lives: 22 min/half-life x 8 half-lives = 176 minutes

Therefore, it would take 176 minutes for the amount of potassium-44 to decrease from 60.0 mg to 7.50 mg.

To know more about  potassium, refer here:

https://brainly.com/question/13321031#

#SPJ11

The balanced reduction half-reaction under basic conditions is: 3 Cr(OH)3 + 9 e⁻→ 3 Cr

The given skeletal oxidation-reduction reaction is:

Cr + N2H4 + Cr(OH)3 → Cr(OH)3 + NH3

To balance the reduction half-reaction, we need to determine the oxidation state of Cr on both sides of the equation.

On the reactant side, Cr has an oxidation state of 0. On the product side, Cr has an oxidation state of +3. Therefore, Cr is undergoing reduction, which means that the reduction half-reaction involves the gain of electrons.

We can represent the reduction half-reaction as follows:

Cr(OH)3 + 3 e⁻ → Cr

To balance the electrons on both sides, we need to multiply the reduction half-reaction by 3:

3 Cr(OH)3 + 9 e⁻ → 3 Cr

learn more about reduction half-reaction here:

https://brainly.com/question/29915024

#SPJ11

The molar solubility, s of Ba3(PO4)2 in terms of Ksp is:D. s=(Ksp/108)^(1/5)

Determining the molar solubility, s, of Ba3(PO4)2 in terms of Ksp.

Here's a step-by-step explanation:

1. Write the balanced dissolution equation:

Ba3(PO4)2 (s) ⇌ 3Ba²⁺ (aq) + 2PO₄³⁻ (aq)

2. Set up the Ksp expression:

Ksp = [Ba²⁺]³[PO₄³⁻]²

3. Define molar solubility:

s = [Ba3(PO4)2] in mol/L

4. Express concentrations in terms of s:

[Ba²⁺] = 3s and [PO₄³⁻] = 2s

5. Substitute concentrations into the Ksp expression:

Ksp = (3s)³(2s)²

6. Solve for s in terms of Ksp:
Ksp = 108s⁵
s = (Ksp/108)^(1/5)

To learn more about molar solubility, visit:

https://brainly.com/question/28202068

#SPJ11

The reaction of methylamine with water is; CH₃NH₂ (aq) + H₂O (l) ⇌ CH₃NH₃⁺ (aq) + OH⁻ (aq), the pH of the solution is 11.42, and  the solution will become more acidic.

The reaction of methylamine with water is;

CH₃NH₂ (aq) + H₂O (l) ⇌ CH₃NH₃⁺ (aq) + OH⁻ (aq)

In this reaction, CH₃NH₂ is a weak base and H₂O is the acid. The conjugate acid of CH₃NH₂ is CH₃NH₃⁺ and the conjugate base of H₂O is OH⁻.

The equilibrium constant expression for this reaction is;

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

At equilibrium, we can assume that x moles of CH₃NH₂ react with x moles of H₂O to form x moles of CH₃NH₃⁺ and x moles of OH⁻. Therefore, we can write;

Kb = x₂ / (0.0251 - x)  

Solving for x, we get;

x = 0.00263 M

Therefore, the concentration of OH⁻ at equilibrium is 0.00263 M. To find the concentration of H⁺, we can use the equation;

Kw = [H⁺][OH⁻]

where Kw is the ion product constant for water, which is 1.0 x 10⁻¹⁴ at 25°C. Solving for [H⁺], we get;

[H⁺] = Kw / [OH⁻] = 1.0 x 10⁻¹⁴ / 0.00263 = 3.8 x 10⁻¹² M

Taking the negative logarithm of [H⁺], we get;

pH = -log[H⁺] = -(-11.42) = 11.42

Therefore, the pH of the solution is 11.42.

When you add one drop of Na₂CO₃ (aq) to the solution of methylamine, the Na₂CO₃ will react with water to produce Na⁺ and OH⁻. The OH⁻ ions will react with the CH₃NH₃⁺ ions in the solution to form CH₃NH₂ and H₂O.

This reaction will shift the equilibrium to the left, decreasing the concentration of OH⁻ and increasing the concentration of H⁺. Therefore, the solution will become more acidic.

To know more about methylamine here  

https://brainly.com/question/28819363

#SPJ4

In regards to the examination of the properties of polystyrene, it is possible that dipping a styrofoam cup into solvents like toluene, distilled water, alcohol, or acetone could cause the cup to be reshaped due to the solvents dissolving or weakening the polystyrene material. However, it is important to note that these solvents can also be hazardous and should be handled with caution.

Labu Anomate University does not appear to be a real university or institution, so I cannot provide information on it. However, I can provide information on Freund's PR (Polarization Resistance) method.

Freund's PR method is a technique used to measure the corrosion rate of metal surfaces in various environments, including aqueous solutions and non aqueous liquids such as organic solvents like toluene, distilled water, alcohol, and acetone. The method involves measuring the polarization resistance of the metal surface, which is proportional to the corrosion rate. This technique is commonly used in industrial applications to determine the effectiveness of corrosion inhibitors and coatings.

To know more about inhibitors refer to

https://brainly.com/question/29519279

#SPJ11

Redox reaction, copper metal is oxidized, and its surface turns black as it forms Cu(NO₃)₂ in solution. Silver ions in the silver nitrate solution are reduced to form silver metal crystals, which can be observed as a fuzzy growth on the copper. The chemical equation for the redox reaction of copper and silver nitrate is: Cu + 2AgNO3 → Cu(NO3)2 + 2Ag

In this equation, copper is oxidized (loses electrons) to form copper(II) nitrate, while silver ions from silver nitrate are reduced (gain electrons) to form solid silver.

The element that is oxidized is copper.

The element that is reduced is silver.

The spectator ion in this reaction is nitrate (NO3-).

The oxidizing agent is silver nitrate, as it causes copper to lose electrons and become oxidized.

The reducing agent is copper, as it causes silver ions to gain electrons and become reduced.

Learn more about electrons here: brainly.com/question/1255220

#SPJ11

The balanced chemical equation for the reaction between HCl and NaOH is: the enthalpy change for the reaction between 1.0 M HCl and 1.0 M NaOH is -54.22 kJ/mol HCl (since the reaction is exothermic).

HCl(aq) + NaOH(aq) → NaCl(aq) + [tex]H_{2} O[/tex](l)

First, we need to calculate the amount of heat released or absorbed by the reaction using the formula:

q = m·C·ΔT

where q is the heat absorbed or released by the reaction, m is the mass of the solution, C is the specific heat of the solution, and ΔT is the change in temperature of the solution. Since the total volume of the solution is 100 mL and the density is 1.0 g/mL, the mass of the solution is:

m = 100 mL × 1.0 g/mL = 100 g

The specific heat of the solution is given as 4.18 J/g-K. The change in temperature is:

ΔT = 27.5°C - 21.0°C = 6.5°C

Therefore, the amount of heat released or absorbed by the reaction is:

q = 100 g × 4.18 J/g-K × 6.5°C = 2,711 J

Next, we need to convert the amount of heat to the enthalpy change for the reaction per mole of HCl. Since we mixed 50 mL of 1.0 M HCl with 50 mL of 1.0 M NaOH, we have 0.05 moles of HCl in the solution. Therefore, the enthalpy change per mole of HCl is:

ΔH = q / n

where n is the number of moles of HCl. Therefore,

ΔH = 2,711 J / 0.05 mol = 54,220 J/mol

To express the result in kJ/mol, we need to divide by 1000:

ΔH = 54.22 kJ/mol

Therefore, the enthalpy change for the reaction between 1.0 M HCl and 1.0 M NaOH is -54.22 kJ/mol HCl (since the reaction is exothermic).

Learn more about chemical equation

https://brainly.com/question/19626681

#SPJ4

The starting materials to form imine A are tert-butylamine and benzaldehyde.

Imines are compounds that contain a carbon-nitrogen double bond and are formed by the reaction of a primary amine with a carbonyl compound, typically an aldehyde or a ketone.

To deduce the starting materials for the synthesis of imines A and B, we need to analyze the given reaction scheme and trace the reaction steps backward.

In the reaction scheme, imine A is formed by the reaction of a primary amine with an aldehyde.

The amine used is tert-butylamine, while the aldehyde used is benzaldehyde. Therefore,

On the other hand, imine B is formed by the reaction of a primary amine with a ketone.

The amine used is aniline, while the ketone used is cyclohexanone. Therefore, the starting materials to form imine B are aniline and cyclohexanone.

To know more about carbonyl compound visit:

https://brainly.com/question/17422534

#SPJ1

For the first question, the reaction can be classified as an acid-base neutralization reaction.

For the second question, the reaction can be classified as a precipitation reaction.

For the third question, using the formula V = m/density, we can calculate the volume of the ethyl alcohol to be 0.196 mL.

For the fourth question, using the formula T in ºC = (T in ºF - 32)/1.8, we can convert the temperature from 75 oF to Celsius degrees, which is 23.9 °C.

1. The reaction NaOH + H₂SO₄ → Na₂SO₄ + H₂O is classified as an acid-base neutralization reaction.

2. The reaction (NH₄)₃PO₄ + Ba(NO₃)₂ → Ba₃(PO₄)₂ + NH₄NO₃ is classified as a precipitation reaction.

3. With 0.155 g of ethyl alcohol and a density of 0.789 g/mL, the volume of alcohol is V = m/density, which results in V = 0.155 g / 0.789 g/mL = 0.196 mL.

4. To convert the room temperature from 75 °F to Celsius, use the formula [T in ºC = (T in F - 32) / 1.8]. This results in a temperature of (75 - 32) / 1.8 = 23.9 °C.

Visit here to learn more about  reaction : https://brainly.com/question/17434463
#SPJ11