Answer:
Using two to three sentences, summarize what you investigated and observed in this lab. I investigated that Most of my planets and moons had the element carbon in them. I observed that Different elements absorb different wavelengths of light.
Astronomers use a wide variety of technology to explore space and the electromagnetic spectrum; why do you believe it is essential to use many types of equipment when studying space?
It is essential to use a number of telescopes sensitive to different parts of the electromagnetic spectrum to study objects in space. Even though all light is fundamentally the same thing, the way that astronomers observe light depends on the portion of the spectrum they wish to study. Tools are useful, such as detectors that help see the different wavelengths of light. Not all light can get through the Earth's atmosphere, so for some wavelengths we have to use telescopes aboard satellites.
If carbon was the most common element found in the moons and planets, what element is missing that would make them similar to Earth? Explain why. (Hint: Think about the carbon cycle.)
The missing element that would make moons and other planets similar to earth is oxygen. The two make carbon dioxide.
We know that the electromagnetic spectrum uses wavelengths and frequencies to determine a lot about outer space. How does it help us find out the make-up of stars?
electromagnetic radiation Explanation, astronomers observe the wavelengths by putting telescopes on mountain tops and take results of what they are seeing
Why might it be useful to determine the elements that a planet or moon is made up of?
It might be useful so we can make new discoveries of life or even plants on other planets and moons. And discover maybe even more moons one other planets.
Hope this helps!!!!
Explanation:
please help me fast
_________ are the smallest plant, visible to our eyes .
A concave mirror has a radius of curvature of 1.6m. Find the focal length
Answer:
given,
Radius of curvature of concave mirror = 1.6m
We know that ,
Focal length = radius/2
Hence ,
Focal length of concave mirror = radius of concave mirror /2
=> F = 1.6/2
=> F = 0.8m
Hence the focal length of concave mirror is 0.8 m
Explanation:
Two friends decide to start selling their drone camera aerial footage. Which economic question have they answered?
For whom to produce?
How much to produce?
How to produce?
What to produce?
The brothers that want to start selling their drone camera aerial footage have answered the question, what to produce.
What is an economic question?The term economic question is a question that evaluates the processes involved in production. These questions are;
For whom to produce?How much to produce?How to produce?What to produce?In this case, the brothers that want to start selling their drone camera aerial footage have answered the question, what to produce.
Learn more about means of production:https://brainly.com/question/3148436
#SPJ1
Answer:What to produce
Explanation:
what are transistors and its types
Answer:
A transistor is a semiconductor device used to amplify or switch electronic signals. Transistors are broadly divided into three types: bipolar transistors (bipolar junction transistors: BJTs), field-effect transistors (FETs), and insulated-gate bipolar transistors (IGBTs).
Explanation:
HOPE THIS HELPS AND HAVE A NICE DAY <3
1. Name three products excreted by plants but commercially used by man. Also state the purpose for which they are used
Answer:
1) Oxygen, It is made as a by-product of photosynthesis. it is used for breathing.
2) Gums, It is a degradation product of cells. It is used in cosmetics, pharmaceuticals, etc.
3) Latex, It is made from the sap of rubber trees. It is used in the manufacture of rubber products.
Explanation: Hope it helps you:))))
Have a good day
When the eyes are closed, what sensory organs provide such information?
Answer:
Explanation:
the inner ears and proprioreceptors
two forces x and y are acting at 120 degrees to each other, if the magnitude are 8N and 10N respectively determine their resultant
The resultant force of both forces is 15.62 N.
What is resultant?The Resultant of forces is a single force obtained when two or more forces are combined.
To calculate the resultant of the force, we use the formula below.
Formula:
R = √[a²+b²-2abcos∅]..................... Equation 1Where:
R = Resultant of the forces.∅ = Angle between both forcesFrom the question,
Given:
a = 8 Nb = 10 NSubstitute these values into equation 1
R = √[8²+10²-2×8×10cos120°]R = √[64+100-160cos120°]R =√ [164-160(-0.5)]R = √[164+80]R = √(244)R = 15.62 NHence, the resultant force of both forces is 15.62 N.
Learn more about resultant force here: https://brainly.com/question/25239010
#SPJ1
Using the parallelogram law of vectors to obtain the resultant, we have the value 16 N.
What is the resultant force?The resultant force is that force that has the same effect in magnitude and direction as two forces acting together. In this case, we have two forces , 8 N and 10 N inclined at an angle of 120 degrees
Using the parallelogram law of vectors to obtain the resultant;
R = √([8²+10²)-2×8×10cos120°]
R = √164 +80
R = 16 N
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
Make a 1000-cm³ container. What
will be the dimensions of the
length, width, and height? How
much water will this container
hold? What is the mass of this
amount of water?
Answer:
see below
Explanation:
OK....here is one :
L W H
10 x 10 x 10 cm = 1000 cm^2 this is a cube
the container will hold the volume of 1000 cm^3 of water
which will have a mass 1 kg ( this is a liter)
Identifying Characteristics of Solids
Use the drop-down menus to complete the statements.
The atoms in a solid
The arrangement of atoms in a solid causes it to have a definite
rn are called
solids.??? Please help
Me it’s due RN
The solids whose particles occur in a definite pattern are called crystaline solids.
What is a crystalline solid?The term crystalline solid has to do with the type of solid in which the atoms that components that make up the solid are all in definite positions and occur in a regular repeating pattern.
The particles of a solid are found in fixed positions. The solids whose particles occur in a definite pattern are called crystaline solids.
Learn more about crystalline solids:https://brainly.com/question/27657808
#SPJ1
a. Remain in a fixed position.
b . Crystalline solids
What are the properties of solid?Some properties of solid are:
solid have a fixed shape and a fixed volumesolid cannot be compressedsolids have high density.force of attraction between the particles in solid is very strong.The space between the particles of solids is negligible.atoms are remain in a fixed positionThe properties of crystalline solid
The atoms that components that make up the solid are all in definite positions Atoms occur in a regular repeating pattern.Hence , The particles of a solid are in fixed positions.
The arrangement of atoms in a solid causes it to have a definite are called crystalline solids.
For more queries related solids visit here:
https://brainly.com/question/14424882
#SPJ1
answer with detail explanation if possible
The work done on a body when it is moved is 125J
What is Work energy theorem?It states that the Work done in moving a body is equal to the change in kinetic energy of the body
Kinetic energy = 1/2 mv²
Given is a body of mass m = 6kg, moving distance d =25 m in time t=5s.
Final Velocity v = 25/5 = 5 m/s
The body is initially at rest, so, final velocity is zero. Then, change in kinetic energy will be
ΔK.E = K.Ef - K.Ei
ΔK.E = 1/2 x 6 x (5)² -0
ΔK.E =125J
According to work energy theorem, work done is
W = 125J
Thus, the work done on a body when it is moved is 125J.
Learn more about work energy theorem.
https://brainly.com/question/10063455
#SPJ1
with detailed explaniation
Answer:
Hi,
I can't tell what it says where you have written 'with the horizontal giving ____'.
I am unable to tell what the word after 'giving' is. Please ix it ASAP.
Thank you
Explanation:
Answer:
Hello is it possible if you can explain what we are supposed to detail and I can't read what the photo says it is a jumble of words?
Explanation:
When a metal sphere is dropped in to a tall cylinder containing liquid its acceleration is g/2 (gravity over 2). Shaow that : density of metal =2density of liquid
Answer:
Fm is the net force down on the metal in air
Fm / 2 is the net force down on the metal in liquid
Fl is the buoyant force on the metal due to liquid
Fm - Fl = Fm / 2 equating upward and downward forces
Fm / 2 = Fl
The specific gravity of the metal is twice that of the liquid
Note: F = M g = ρ V g since ρ = M / V
Which statement about bout waves is correct?
Answer:
In light waves, the electromagnetic fields oscillate perpendicular to the direction of propagation. Hence, sound waves are longitudinal waves whereas light waves are transverse waves.
If u add 1.362 and 25.2 what is the correct answer?
Answer:
26.562
Explanation:
1+25= 26
0.362+0.2= 0.562
26+0.562= 26.562
or just use a calculator
If the period of a wave is 9.2 s, what is its frequency (in Hz)?
The period of the function is the inverse of the frequency:
⇒ (in other words) [tex]period = \frac{1}{frequency}[/tex]
Since the period is 9.2s:
[tex]Frequency = \frac{1}{period}=\frac{1}{9.2} =0.11_.Hz[/tex]
Answer: 0.11 Hz
Hope that helps!
Question: How does a lunar eclipse occur? What evidence can you provide to explain that?
Think!!!! Write Claim, Reasoning and add evidence.
Answer:
Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.
Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.
Reasoning: The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.
Hope this helps you czn!!
Please Mark me Brainleast!!!!!!!!!!
Answer:
Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.
Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.
Reasoning: The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.
Hope this helps you czn!!
Please Mark me Brainleast!!!!!!!!!!
A wall clock has a second hand 25.0 cm long.
For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Fast car, flat curve.
Part A
What is the radial acceleration of the tip of this hand?
Express your answer in centimeters per second squared.
The radial acceleration of the tip of this hand is 0.274 cm/s². The answer is expressed in centimeters per second squared.
What is acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
The radial acceleration of the tip of this hand is found as;
[tex]\rm \omega = \frac{2 \pi}{60} \\\\ a_r= \omega^2r\\\\ a= (\frac{2\pi}{60} )^2\times 25\\\\a=0.274 \ cm/s^2[/tex]
Hence,the radial acceleration of the tip of this hand is 0.274 cm/s²
To learn more about acceleration, refer to the link;
https://brainly.com/question/2437624
#SPJ1
The nuclear reaction that powers the sun involves the fusion of four protons (mp = 1.673x10-27 kg) into a helium nucleus (mHe = 6.645x10-27 kg). The process involves several steps, but the net reaction is simply: 4p He + energy. How much energy is released overall in each fusion process? Give your answer in J and MeV
Explanation:
it's 5 + 5 + 5 + 12 + 5 x 7 x 7 7+ 8 5+6+ +8 +9 + 9 5
A lizard climbs up a building 15.5 m and then turns around and goes down the bulding 23.7 m. This takes the lizard 31.5s. what is the average velocity of the lizard?
1.24 m/s Down
0.26 m/s Down
258 m/s Down
3.8 m/s Down
The average velocity of the lizard for the whole journey is 0.26 m/s Down.
What is average velocity?The term average velocity has to do with the velocity of the lizard for the whole journey. We can see that the downward displacement is greater than the upward displacement.
Thus;
Velocity = displacement / time = 23.7 m - 15.5 m/31.5s = 0.26 m/s Down.
Thus, the average velocity of the lizard for the whole journey is 0.26 m/s Down.
Learn more about velocity:https://brainly.com/question/13639113
#SPJ1
Which statement best defines work? (2 points) Group of answer choices
-Work is the time it takes to move an object once acted upon by a force.
-Work occurs when balanced forces act on an object and cause movement in the direction of these forces.
-Work occurs when a force causes motion of an object, and this motion is in the same direction of the applied force.
-Work is the distance over time that an object moves once acted on by a force.
Answer:last choice is correct. Work is equally to force times distance
Explanation:to generalize, W is equal to to force as a function of distance integrated over distance. Work is equivilent to energy. See work/force equivalency
Ultrasound is used to scan the unborn baby of a pregnant mother.
The detector receives an echo from the skull of the fetus 58 us after the pulse leaves the ultrasound
scanner.
Calculate the distance from the ultrasound scanner to the skull to 2 significant figures.
Give the unit for your answer.
(The speed of ultrasound in soft tissue is 1540 m/s
For thousands of years people thought that heavier objects fell faster than lighter objects. In fact, this is something that we can sometimes observe in our everyday lives. But according to Galileo this is wrong! His Law of Falling Bodies says that all objects fall at the same rate. After watching the assigned video please comment on how it is possible that Galileo's theory says one thing but our everyday experience says something else.
Answer:
See below
Explanation:
Gallileo is CORRECT in a vacuum where there is no air friction
air friction affects same or different weight objects differently and will cause same-weight or different weight objects to fall at different speeds
How much weight can be placed on the spring so that the end of the spring is 2m above the ground?
The weight must be 288N placed on the end of the spring when it is 2m from the ground.
What is gravitational potential energy?If an object is lifted, work is done against gravitational force. The object gains energy.
Given is a spring has a spring constant of 48 N/m. The end of the spring hangs 8 m above the ground. The final height of weight above the ground, h =2m
Using Hooke's law, expressed as
Force, F = k (x₂-x₁).
Put the values, we get
F = 48 (8-2)
F = 288 N
This force applied on the spring is equal to the weight placed on the spring.
Weight W= 288N.
Thus, the weight must be 288N.
Learn more about gravitational potential energy.
https://brainly.com/question/3884855
#SPJ1
a steam engine work on its vicinity 285 k heat is released with the help of 225 c energy absorbed to the system what is the efficiency of steam engine explain the use of the rest of the energy physic problem
The efficiency of steam engine is 26.66 %.
What is Efficiency?The efficiency is defined as the work done by the engine divided by the heat supplied.
Work done is the difference between the heat supplied and heat rejected.
So, efficiency η = (Qs -Qr) / Qs
Given is the heat supplied Qs = 225 Joules and heat rejected Qr =285 . then the work done is
W = 225 -225 = - 60 Joules
Efficiency η = 60/225 x 100%
η = 26.66 %
Thus, the efficiency of the steam engine is 26.66 %.
Learn more about efficiency.
https://brainly.com/question/13828557
#SPJ2
Predict the gravitational force between two 15-kg balls whose centers are 35 m apart.
[tex]F=G\frac{m_1-m_2}{r^2}[/tex]
[tex]=\frac{(6.67\times10^{-11}N*m/kg^2)(15kg) }{(0.35m)^2}[/tex]
[tex]=1.2\times10^{-7} N[/tex]
Because the weight of one ball is mg = 147 N, the gravitational force between the two balls is [tex]1.2\times10^{-7}N[/tex] or [tex]8.4*10^3[/tex] parts per billion of the weight.
ten-story building has identical stairs throughout its stairways. A student calculates the amount of work required to climb one set of stairs and the amount of work to climb the entire ten sets.
Which quantity will remain constant in this experiment?
Answer:
c
Explanation:
A person in a hurry averages 70mph on a trip covering a distance of 500 m. what time was required to travel that distance?
The time required to travel that distance at the given speed is determined as 15.84 seconds.
Time of motionThe time of motion of the person is calculated as follows;
Distance = speed x time
time = distance/speed
where;
distance = 500 m = 0.31 miletime = (0.31 mile)/(70 mph)
time = 0.0044 hr = 15.84 seconds
Thus, the time required to travel that distance at the given speed is determined as 15.84 seconds.
Learn more about time here: https://brainly.com/question/10428039
#SPJ1
1. What kind of light phenomena happen due to the refraction of light upon hitting the small crystals that make up cirrus or cirrostratus clouds?
2. A light phenomena which are formed when light passes through clouds and strikes
18
the ice crystals in them?
3. A light phenomenon formed from the combination of several light properties like refraction, reflection, and dispersion?
4. Rainbow are created after a rain shower and . 5. What do you call a visible accumulations of tiny water droplets or ice crystals
in the Earth’s atmosphere?
6. Howmanycolorsinrainbow?
7. What kind of rainbows are formed when light strikes small raindrops with almost the same size?
8. What kind of rainbows are formed when two inner reflections are done instead of one; this causes the reversal of colors in a secondary rainbow in comparison to a primary rainbow?
9. What do you call as a reflective surface that is curved inward and away from the light source?
10. What kind of mirror are curved outward like the bottom
of a spoon?
1. The light phenomena happen due to the refraction of light upon hitting the small crystals that make up cirrus or cirrostratus clouds is called Sundogs.
2.A light phenomena which are formed when light passes through clouds and strikes the ice crystals in them is called Halos.
3.A light phenomenon formed from the combination of several light properties like refraction, reflection, and dispersion is Rainbow.
4. Rainbow are created after a rain shower and Sun light.
5. A visible accumulations of tiny water droplets or ice crystals.
in the Earth’s atmosphere are called Clouds.
6. There are seven colors in a rainbow.
7. The kind of rainbows are formed when light strikes small raindrops with almost the same size are Supernumerary rainbows.
8.The kind of rainbows are formed when two inner reflections are done instead of one; this causes the reversal of colors in a secondary rainbow in comparison to a primary rainbow are Secondary rainbows.
9. A reflective surface that is curved inward and away from the light source is concave mirror.
10. The kind of mirror are curved outward like the bottom
of a spoon is convex mirror.
What is reflection?When a light strikes on a shiny surface, it reflects back the light ray in the same medium. The phenomenon is called reflection and the ray is called the reflected ray.
Thus, all the questions are answered.
Learn more about reflection.
https://brainly.com/question/2254222
#SPJ1
why is electric current scalar quantity with having direction ?
Explanation:
It represents the direction of flow of positive charge but is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition. The angle between the wires carrying current does not affect the total current in the circuit.
Answer:
It represents the direction of flow of positive charge but it is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition, because the angle between the wires carrying current does not affect the total current in the circuit.
A student places two magnets as shown; with their south poles equal distances from a compass. The student observes that the compass needle points in the indicated direction. From this observation alone can you determine which magnet is stronger. Justify your reasoning?
Since the direction of the needle depends on the proximity of the magnet thus this test alone is insufficient to determine the stronger magnet.
What is a magnetic field?A magnetic field refers to the region where the effect of a magnet is felt. The magnetic field can be observed by the use of a compass.
Now, we know that the closer the magnet is to the compass, the greater the deflection hence this test alone is insufficient to determine the stronger magnet.
Learn more about magnetic field:https://brainly.com/question/14848188
#SPJ1