2.2 Mr Thorn is concerned about how much electricity he is using and how much he has to pay in electricity costs each month. To help him to keep track of his electricity consumption, the electricity department provided Mr Thorn with an excerpt from his log table, shown below: MR THORN'S WEEKLY ELECTRICITY CONSUMPTION LOG FOR ONE WEEK APPLIANCE AND ELECTRICAL RATING in Watts per Hour (1 000 W = 1 kW) Stove front small plate Oven bake element Geyser Kettle Refrigerator with freezer Lighting: single bulb (60 W) 1900 1 500 40 m AMOUNT OF TIME USED in hours (h) or minutes (m) MON TUE 2 000 24 h 550 24 h 2.2.1 30 m 1 400 5x3 m 3x3m 1,5 h 24 h 2.2.4 24 h WED THU 24 h 5x3 m 24 h 40 m 24 h 2x3 m 24 h FRI 20 m 24 h SAT 24 h 30 m 40 m 24 h SUN 24 h 1h 3x3m 6x3m 6x3m 24 h 24 h 60 6x5h 6x4,5 h 6x 1,5 h 6x5h 6x3,5h 6x7h 6x 12 h Total kWh used 4 6 336 92,4 13,9 Cost of electricity (94,5 c/kWh) R3,78 R5,69 [Source: Eskom Demand Side Management, Generation Communication GFS 0030 Revision 2, (May 2005).] Calculate the electrical rating of the small front plate of the stove in kilowatt (kW). Determine the total kWh Mr Thorn used when boiling his kettle for the week. R317,52 R13,10 2.2.2 Which appliance uses the most electricity? What could he do to reduce his consumption in this area? 2.2.3 Calculate the cost of electricity of the refrigerator with freezer. Give your answer in rands.​

feasible region exists, find its corner points. (3,2), (6,4), (5,12), (3,8).

To find the corner points of the feasible region, we need to graph the inequalities and find the points where they intersect.

First, we graph the line 3y – 2x = 0 by finding its intercepts:

when x = 0, 3y = 0, so y = 0;

when y = 0, -2x = 0, so x = 0.

Thus, the line passes through the origin (0,0).

Next, we graph the line y + 8x = 52 by finding its intercepts:

when x = 0, y = 52;

when y = 0, x = 6.5.

Thus, the line passes through (0,52) and (6.5,0).

We graph the line y – 2x = 2 by finding its intercepts:

when x = 0, y = 2;

when y = 0, x = -1.

Thus, the line passes through (0,2) and (-1,0).

Finally, we graph the line x = 3, which is a vertical line passing through (3,0).

Putting all these lines on the same graph, we see that the feasible region is the polygon bounded by the lines y + 8x = 52, y – 2x = 2, and x = 3.

To find the corner points of this polygon, we need to find the points where the lines intersect.

First, we solve the system of equations y + 8x = 52 and y – 2x = 2:

Adding the two equations, we get 9x = 27, so x = 3.

Substituting this value of x into either equation, we get y = 4.

Thus, the point (3,4) is one of the corner points.

Next, we solve the system of equations y – 2x = 2 and x = 3:

Substituting x = 3 into the first equation, we get y = 8.

Thus, the point (3,8) is another corner point.

Finally, we solve the system of equations x = 3 and the line 3y – 2x = 0:

Substituting x = 3 into the equation, we get 3y – 6 = 0, so y = 2.

Thus, the point (3,2) is the last corner point

Therefore, the answer is (c) (3,2), (6,4), (5,12), (3,8).

Learn more about corner points

brainly.com/question/29712654

#SPJ11

Answer:b

Step-by-step explanation:

b

Answer:$192

Step-by-step explanation:

Step 1: Multiply 800 times 12%. You get $96

Step 2: Since the question asked how much she will earn in 2yrs double the interest amount

Step 3 96+96=192

Answer:

a and c are correct.

Step-by-step explanation:

In this arithmetic sequence, the first term is 3, and the common difference is 2. So a and c are correct.

a(n) = 3 + 2n for n>0 since a(0) = 3

c(n) = -1 + 2n for n>2 since c(2) = 3

The initial value of the linear relationship will be 5 and slope= 5/3 and y intercept is 5 .

Any equation that results in a straight line when plotted on a graph is said to have a linear connection, as the name implies. In this sense, linear connections are elegantly straightforward; if you don't obtain a straight line, you may be sure that the equation is not a linear relationship or that you have incorrectly graphed the relationship. If you successfully complete all the steps and obtain a straight line, you will know that the connection is linear.

[tex]y=mx+c[/tex]

Line intercepts y at (0,5), i.e C=5,

Therefore,

[tex]y=mx+5[/tex]

Substituting, x =-3 in y =mx+5

[tex]y=m(-3)+5=-3m+5[/tex]

To find the x-intercept, putting , y = 0

[tex]-3m+5=0\\3m=5\\m=5/3[/tex]

Hence, slope= 5/3 and y intercept is 5

Now, refering to the graph, (refer to image attached)

When the input of a linear function is zero, the output is the starting value, often known as the y-intercept. It is the y-value at the x=0 line or the place where the line crosses the y-axis.

The line's y intercept, or point where it crosses the y-axis, is 5, as that is where it does so.

The linear relationship's starting point thus equals 5.

Learn more about Linear Relationships here:

https://brainly.com/question/31179532

#SPJ1

Answer: 54, 72, 54.

Step-by-step explanation:

To divide 180 in the ratio 3:4:5, we need to find the value of each part.

Step 1: Find the total number of parts in the ratio.

3 + 4 + 5 = 12

Step 2: Find the value of one part.

180 / 12 = 15

Step 3: Multiply each part by the value of one part to get the final answer.

3 parts: 3 x 15 = 45

4 parts: 4 x 15 = 60

5 parts: 5 x 15 = 75

Therefore, the values of the parts are 45, 60, and 75. However, we can simplify these fractions by dividing them by 5.

45/5 = 9

60/5 = 12

75/5 = 15

So the simplified ratio is 9:12:15, which can be further simplified by dividing all parts by 3 to get 3:4:5.

Therefore, the final answer is:

3 parts: 3 x 15 = 45

4 parts: 4 x 15 = 60

5 parts: 5 x 15 = 75

So the values of the parts are 45, 60, and 75, or simplified as 54, 72, 54.

Answer:

Step-by-step explanation:

Divide 180 in the ratio 3:4:5

Multiply the ratio by a number so that  it adds to 180

[tex]\begin{array}{llll} \textit{using the pythagorean theorem} \\\\ a^2+o^2=c^2\implies a=\sqrt{c^2 - o^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{10}\\ a=\stackrel{adjacent}{x}\\ o=\stackrel{opposite}{5} \end{cases} \\\\\\ x=\sqrt{ 10^2 - 5^2}\implies x=\sqrt{ 100 - 25 } \implies x=\sqrt{ 75 }\implies x=5\sqrt{3}[/tex]

Using the Triangle proportionality theorem, we have verified that AB and CD are parallel

From the question, we are to verify that AB and CD are parallel.

To verify that AB and CD are parallel, we will show that the triangles satisfy the Triangle proportionality theorem

The triangle proportionality theorem states that if a line is drawn parallel to any one side of a triangle so that it intersects the other two sides in two distinct points, then the other two sides of the triangle are divided in the same ratio.

Thus,

We have to prove that

AC / CE = BD / DE

4 / 12 = (4 2/3) / 14

1 / 3 = (14 / 3) / 14

1 / 3 = (14 / 3) × 1 / 14

1 / 3 = 1 /3

The above mathematical statement is true.

Hence, AB and CD are parallel

Learn more on Triangle proportionality theorem here: https://brainly.com/question/11827486

#SPJ1

a. There are 54 elements in the sample space.

b. P(A) = 0.2778

c. No, events A and B are not mutually exclusive.

d. No, events A and C are not mutually exclusive.

a. To find the total number of elements in the sample space, we need to multiply the number of cards by the number of possible outcomes from the coin toss. Therefore, the sample space has 54 elements (9+11+7) x 2.

b. The probability of event A is the probability of picking a green card first (9/27) multiplied by the probability of getting a head on the coin toss (1/2). Therefore, P(A) = (9/27) x (1/2) = 0.2778 (rounded to 4 decimal places).

c. Events A and B are not mutually exclusive because it is possible to pick a red or blue card and still have a head on the coin toss. Therefore, there are some elements in the sample space that belong to both events.

d. Events A and C are not mutually exclusive because it is possible to pick a green card and still have a head on the coin toss. Therefore, there are some elements in the sample space that belong to both events.

To learn more about probability, here

https://brainly.com/question/30034780

#SPJ4

Using sigma notation, the given series can be written as ∑(n=1 to ∞) [((2n-1)/(2n+1)) + (1/2)]

Hi! To express the given infinite series using sigma notation, observe the pattern in the numerators and denominators of each fraction:

1/3, 1/2, 3/5, 5/7, ...

Numerators: 1, 1, 3, 5, ...
Denominators: 3, 2, 5, 7, ...

The numerators follow the pattern: 1, 1, 1+2, 3+2, ...
The denominators follow the pattern of consecutive odd numbers: 1+2, 1, 3, 5, ...

With these patterns, you can write the series using sigma notation:

Σ[(n % 2 == 1 ? n : 1) / (2n + 1)]

Here, the % symbol represents the modulo operation, and n starts from 0 and goes to infinity. This expression captures the patterns observed in the numerators and denominators of the series.

Know more about sigma notation here;

https://brainly.com/question/27737241

#SPJ11

Answer:

If there's 5 teachers then for that amount of teachers there are 180 learners.

Step-by-step explanation:

If you have a number, example 20 you have to know how many times 5 goes in 20 (4 times). Now you have to do: 4 times 180

The population of the country in 2003 was 979 million. We cannot use the given exponential model to directly determine the population of the country in 2003.

Because the model gives the population in millions of people years after 2003. To determine the population in 2003, we need to substitute t=0 into the equation because 2003 is the starting year.

So, when we substitute t=0 into the given exponential model, we get:

a = 979e^(0.0008t)

a = 979e^(0.0008*0)

a = 979e^0

a = 979

Therefore, the population of the country in 2003 was approximately 979 million people. The value of 'a' obtained from the exponential model represents the population of the country in millions of people at time 't' years after 2003.

When we substitute 't=0' into the model, we get the population of the country in 2003 as the initial population. Hence, we can use the given exponential model to determine the population of the country in 2003.

To learn more about exponential model visit:

https://brainly.com/question/30954983

#SPJ4

The volume formed by rotating the region enclosed by y=5√(x) and y=x about the line y=25 is 5625π/2 cubic units.

To find the volume formed by rotating the region enclosed by y=5√(x) and y=x about the line y=25, we can use the method of cylindrical shells.

First, we need to find the limits of integration. The two curves intersect at (0,0) and (25,5), so we will integrate from x=0 to x=25.

Next, we need to find the radius of each shell. The distance between the line y=25 and the curve y=5√(x) is 25 - 5√(x).

Finally, we need to find the height of each shell. The height of each shell is given by the difference between the two curves at a given x value, which is y=x - 5√(x).

The volume of each shell is given by the formula

V = 2πrhΔx

where r is the radius of the shell, h is the height of the shell, and Δx is the thickness of the shell.

Putting it all together, we have:

V = ∫(2π)(25-5√(x))(x-5√(x))dx from x=0 to x=25

This integral can be evaluated using u-substitution. Let u = √(x), then du/dx = 1/(2√(x)) and dx = 2u du. Substituting, we get:

V = 2π ∫(25u - 5u^2)(u^2) du from u=0 to u=5

This integral can be simplified to

V = 2π ∫(25u^3 - 5u^4) du from u=0 to u=5

V = 2π [(25/4)u^4 - (5/5)u^5] from u=0 to u=5

V = 2π [(25/4)(5^4) - (5/5)(5^5)]

V = 5625π/2 cubic units

Learn more about volume here

brainly.com/question/17347948

#SPJ4

The given question is incomplete, the complete question is:

Find the volume formed by rotating the region enclosed by y=5√(x) and y=x about the line y=25.

Answer

-6a cubed

Step-by-step explanation:

Answer:

Step-by-step explanation:

We have the demand function: x = 600 - P - 3p P + 1.

Taking the partial derivative of x with respect to p, we get:

dx/dp = -4/(P+1)^2

Substituting p = 4, we get:

dx/dp | p=4 = -4/(4+1)^2 = -0.064

So the rate of change in the demand x for the price $4 is approximately -0.06 units per dollar.

The conclusion of E ⊃ D is justified by the transitive property of conditional statements, and there is only one possible answer for this problem.

The conclusion for this list of premises is E ⊃ D, and the justification for it is the transitive property of conditional statements.

To explain this, we can start by looking at the first premise: R ⊃ D. This means that if R is true, then D must also be true.

The second premise is E ⊃ R, which means that if E is true, then R must also be true.

Using the transitive property of conditional statements, we can combine these two premises to get:

E ⊃ D

This is the conclusion, which states that if E is true, then D must also be true. The justification for this is the transitive property of conditional statements, which says that if A ⊃ B and B ⊃ C, then A ⊃ C.

Know more about transitive property here:

https://brainly.com/question/2437149

#SPJ11

Answer:

The correct answer would be 18

Step-by-step explanation:

1) a rational number is -2/5

2) -14/9 is a rational number

3) 567 is a prime number, a whole number

4) -20/5 is a rational number, an integer

Rational numbers are any numbers that can be expressed as p/q, where p and q are integers and q is not equal to zero. Whole Numbers- Whole numbers are integers ranging from 0 to infinity. Prime numbers are those that have only 1 and themselves as factors.

A rational number is -2/5. It is a fraction with a numerator of -2 and a denominator of 5.

-14/9 is a rational number. It is a fraction with a numerator of -14 and a denominator of 9.

567 is a prime number. It is a whole number as well as an integer. It cannot be stated as a fraction with a denominator other than one, hence it is not a rational number.

-20/5 is a sensible number. It is the same as -4, which is an integer. It is also an even number. Because it is negative, it is not a natural number.

Learn more about numbers here:

https://brainly.com/question/17429689

#SPJ1

Expected value (E(x)) for the given probability density function is approximately 6.056.

Here's a step-by-step explanation:

Step 1: Understand the expected value formula for continuous random variables:
E(x) = ∫[x × f(x)] dx, where the integral is taken over the given interval.

Step 2: Substitute the given pdf and interval into the expected value formula:
E(x) = ∫[x × (x/12)] dx from 5 to 7

Step 3: Simplify the integrand:
E(x) = ∫[(x²)/12] dx from 5 to 7

Step 4: Integrate the function with respect to x:
E(x) = [(x³)/36] evaluated from 5 to 7

Step 5: Apply the limits of integration and subtract:
E(x) = [(7³)/36] - [(5³)/36] = (343/36) - (125/36) = 218/36

Step 6: Convert the fraction to a decimal:
E(x) ≈ 6.056

So, the expected value (E(x)) for the given probability density function is approximately 6.056.

Learn more about probability density.

brainly.com/question/29129585

#SPJ11

Answer:

1/y^5.

Step-by-step explanation:

To simplify y²/y⁷, we can use the quotient rule of exponents, which states that when dividing exponential terms with the same base, we can subtract the exponents. Specifically, we have:

y²/y⁷ = y^(2-7) = y^(-5)

Now, we can simplify further by using the negative exponent rule, which states that a term with a negative exponent is equal to the reciprocal of the same term with a positive exponent. Specifically, we have:

y^(-5) = 1/y^5

Therefore, y²/y⁷ simplifies to 1/y^5.

Answer:

24.8cm

Step-by-step explanation:

To find the perimeter of the compound shape we first jave to find distance DE. For this we can use pythagoras theorem which states that the square of the longest side of a RIGHT-ANGLED TRIANGLE (which is opposite the right angle) is equal to the sum of the squares of the two adjuscent sides.

USING TRIANGLE EFD

ED² = EF²+FD² (Pythagoras theorem)

ED² = 6²+5²

ED²=61

find the square root of both sides to find distance ED

[tex] \sqrt{ {ed}^{2} } = \sqrt{61} [/tex]

ED= 7.8 cm

Add up all the distances on the exterior edges of the shape to find the perimeter.

6cm+3cm+5cm+3cm+7.8cm=24.8cm

A "dosage-strength" of "0.2-mg" in "1.5-mL" is available. Give 0.15 mg. in 1.125 mL.

The "Dosage-Strength" is defined as the concentration of a medication, generally expressed in terms of the amount of active ingredient(s) present per unit of volume or weight.

To calculate the volume of the 0.2 mg dosage strength needed to obtain 0.15 mg, we use the following formula:

⇒ Volume to withdraw = (Dosage needed/Dosage strength) × Volume of available dosage strength,

Substituting the values,

We get,

⇒ Dosage needed = 0.15 mg,

⇒ Dosage strength = 0.2 mg,

⇒ Volume of 0.2 mg = 1.5 mL,

So, Volume of 0.15 mg = (0.15 mg/0.2 mg) × 1.5 mL,

⇒ 1.125 mL.

Therefore, 0.15 mg of the medication can be obtained by using 1.125 mL of the available 0.2 mg dosage strength.

Learn more about Dosage here

https://brainly.com/question/28883607

#SPJ4

The given question is incomplete, the complete question is

A dosage strength of 0.2 mg in 1.5 mL is available. Give 0.15 mg. in ___ mL.

a)  The x-value that would give subtraction of exactly equal numbers is 0.

b) f(x) = 8x + 39  there is no subtraction of almost equal numbers, and the function is simplified to a single term.

(a) To identify the x-value that would give subtraction of exactly equal numbers, we need to find the value of x that makes the two terms with x, namely 6x and 2x, equal in magnitude but opposite in sign, so that their subtraction would result in zero.

So, we can write the equation as follows:

6x - 2x = 0

Solving for x, we can simplify the equation by combining like terms:

4x = 0

Dividing both sides by 4, we obtain:

x = 0

Thus, the x-value that would give subtraction of exactly equal numbers is 0. When we plug in any value close to 0, such as 0.1, -0.1, 0.01, or -0.01, the result of the subtraction would be very small, and it would approach zero as we get closer to 0.

(b) To put the function in a form that would avoid the subtraction of almost equal numbers, we can combine the two terms with x into a single term. We can simplify the function as follows:

f(x) = 6x + 2x + 39

f(x) = (6 + 2)x + 39

f(x) = 8x + 39

Now, there is no subtraction of almost equal numbers, and the function is simplified to a single term. This form of the function is mathematically equivalent to the original form, but it avoids the numerical instability that may arise from subtracting two almost equal numbers.

To learn more about function visit: https://brainly.com/question/12431044

#SPJ11

An x-value of -4.875 would give subtraction of exactly equal numbers.

(a) To find an x-value that would give subtraction of exactly equal numbers, we need to solve the equation:

6x + 2x + 39 = 0

Simplifying this equation, we get:

8x = -39

x = -4.875

Therefore, an x-value of -4.875 would give subtraction of exactly equal numbers.

(b) To put the function in a form that would avoid subtraction, we can rewrite it as follows:

f(x) = 6x - 2x + 39

This is equivalent to the original function, but avoids subtraction by using addition instead. We can simplify this expression as follows:

f(x) = 4x + 39

This is the simplified form of the function that avoids subtraction.

To learn more about x-value  visit: https://brainly.com/question/14170328

#SPJ11

There is no evidence that her running times have improved.

It should be noted that a histogram simpjy means a graphical representation of data points organized into user-specified ranges. The histogram condenses a data series into an easily interpreted visual by taking many data points and grouping them into logical ranges or bins.

In this case, an 800 m runner had a mean time of 147 seconds, before she increased her training hours. The histogram shows information about the times she runs after increasing her training hours.

Based on the diagram, there's no evidence that showed improvement

Learn more about histogram on

https://brainly.com/question/2962546

#SPJ1

The probability of getting the specific sequence t, h, h, h, h, t, t, t, t, t, t when tossing a coin 11 times is 1/2048.

To find the probability of this specific sequence occurring, we need to use the formula for the probability of a specific sequence of independent events:

P(A and B and C and D and E and F and G and H and I and J and K) = P(A) * P(B) * P(C) * P(D) * P(E) * P(F) * P(G) * P(H) * P(I) * P(J) * P(K)

In this case, A represents the first toss being a tails (t), B represents the second toss being a heads (h), and so on until K represents the eleventh toss being a tails (t).

Using the given sequence, we can calculate the individual probabilities for each toss:

P(A) = 1/2 (since there is a 50/50 chance of getting either heads or tails on the first toss)

P(B) = 1/2 (since there is a 50/50 chance of getting heads on the second toss after getting tails on the first toss)

P(C) = 1/2 (since there is a 50/50 chance of getting heads on the third toss after getting heads on the second toss)

P(D) = 1/2 (since there is a 50/50 chance of getting heads on the fourth toss after getting heads on the third toss)

P(E) = 1/2 (since there is a 50/50 chance of getting heads on the fifth toss after getting heads on the fourth toss)

P(F) = 1/2 (since there is a 50/50 chance of getting tails on the sixth toss after getting heads on the fifth toss)

P(G) = 1/2 (since there is a 50/50 chance of getting tails on the seventh toss after getting tails on the sixth toss)

P(H) = 1/2 (since there is a 50/50 chance of getting tails on the eighth toss after getting tails on the seventh toss)

P(I) = 1/2 (since there is a 50/50 chance of getting tails on the ninth toss after getting tails on the eighth toss)

P(J) = 1/2 (since there is a 50/50 chance of getting tails on the tenth toss after getting tails on the ninth toss)

P(K) = 1/2 (since there is a 50/50 chance of getting tails on the eleventh toss after getting tails on the tenth toss)

Multiplying these probabilities together gives us the probability of getting the sequence t, h, h, h, h, t, t, t, t, t, t:

P(t, h, h, h, h, t, t, t, t, t, t) = (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) * (1/2) = 1/2048

Learn more about probability:

https://brainly.com/question/13604758

#SPJ11

The true statements are:

Cylinder A has a smaller volume than Cylinder B.

Cylinder B has a larger base area than Cylinder A.

Cylinder B is shorter than Cylinder A.

Use the formula V = Bh, where B is the area of the base and h is the height of the cylinder.

For Cylinder A:

The radius is approximately 3/2 meters (half of the circumference C divided by 2π).

The area of the base is A = πr² ≈ 3.14 × (3/2)² ≈ 7.07 square meters.

The volume is V = Bh = 7.07 × 5 ≈ 35.35 cubic meters.

For Cylinder B:

The radius is approximately 5/2 meters.

The area of the base is A = πr² ≈ 3.14 × (5/2)² ≈ 19.63 square meters.

The volume is V = Bh = 19.63 × 3 ≈ 58.89 cubic meters.

Find out more on cylinders here: https://brainly.com/question/23935577

#SPJ1

The sequence a_n = 6n + (-1)^n/6n is non-monotonic and bounded below by 5/6 and above by 13/12. So, the correct answer is A).

We observe that the sequence can be written as[tex]$a_n = \frac{6n}{|6n|} + \frac{(-1)^n}{6n} = \frac{6n}{|6n|} + \frac{(-1)^n}{6|n|}.$[/tex]

We have [tex]$a_{2n} = \frac{12n}{6n} + \frac{1}{6n} = \frac{13}{6} \leq \frac{13}{6}$[/tex] and [tex]$a_{2n+1} = \frac{-12n-6}{6n+3} - \frac{1}{6n+3} = -\frac{13}{12} \geq -\frac{13}{12}.$[/tex]Therefore, the sequence is increasing and bounded below by 5/6 and above by 13/12.

We have[tex]$a_{2n} = \frac{12n}{6n} + \frac{1}{6n} = \frac{13}{6} \geq \frac{0}{1}$[/tex]and

[tex]$a_{2n+1} = \frac{-12n-6}{6n+3} - \frac{1}{6n+3} = -\frac{13}{12} \geq -\frac{13}{12}.$[/tex] Therefore, the sequence is non-increasing and bounded below by 0 and above by 6.

From above part, we see that the sequence is not monotonic.

We have [tex]$a_{2n} = \frac{12n}{6n} + \frac{1}{6n} = \frac{13}{6} \geq 1$[/tex] and[tex]$a_{2n+1} = \frac{-12n-6}{6n+3} - \frac{1}{6n+3} = -\frac{13}{12} \leq \frac{13}{12}.$[/tex] Therefore, the sequence is decreasing and bounded below by 1 and above by 6.

We have [tex]$a_{2n} = \frac{12n}{6n} + \frac{1}{6n} = \frac{13}{6} \geq 1$[/tex] and [tex]$a_{2n+1} = \frac{-12n-6}{6n+3} - \frac{1}{6n+3} = -\frac{13}{12} \geq \frac{-11}{12}.$[/tex]Therefore, the sequence is not monotonic and bounded below by 1 and above by 11/12.

Therefore, the answer is  a_n = 6n + (-1)^n/6n| is increasing; bounded below by 5/6 and above by 13/12. So, the correct option is A).

To know more about boundedness and monotonicity:

https://brainly.com/question/31405095

#SPJ4

The prime factorization of 39 is 3 × 13. Therefore, the greatest prime factor of 39 is 13.

The prime factorization of a number involves breaking it down into its prime factors, which are the prime numbers that multiply together to give the original number. Here's how the prime factorization of 39 is calculated:

Start with the number 39.

Find the smallest prime number that divides evenly into 39. In this case, it's 3, because 3 x 13 = 39.

Divide 39 by 3 to get the quotient of 13.

Since 13 is a prime number, it cannot be divided any further.

Write the prime factors in ascending order: 3 x 13.

So, the prime factorization of 39 is 3 x 13. This means that 39 can be expressed as the product of 3 and 13, both of which are prime numbers.

Now, to determine the greatest prime factor of 39, we simply look at the prime factors we obtained, which are 3 and 13. Since 13 is larger than 3, it is the greatest prime factor of 39. Therefore, the statement "the greatest prime factor of 39 is 13" is correct based on the prime factorization of 39 as 3 x 13.

To learn more about prime numbers, refer below:

https://brainly.com/question/29629042

#SPJ11

The predicted population in 2000 is (a) 529.85 million and (b) 244.66 million.

To use an exponential model to predict the population in 2000, we need to find the values of the growth rate and the initial population.

(a) Using the census figures for 1900 and 1910, we can find the growth rate as follows:

r = (ln(P₁/P₀))/(t₁ - t₀)

where P₀ is the initial population (in 1900), P₁ is the population after 10 years (in 1910), t₀ is the initial time (1900), and t₁ is the time after 10 years (1910).

Substituting the values, we get:

r = (ln(92/76))/(1910-1900) = 0.074

Now, we can use the exponential model:

P(t) = P₀ * [tex]e^{(r(t-t_0))}[/tex]

where t is the time in years, and P(t) is the population at time t.

Substituting the values, we get:

P(2000) = [tex]76 * e^{(0.074(2000-1900))} = 76 * e^{7.4}[/tex] = 529.85 million (rounded to two decimal places)

Therefore, the predicted population in 2000 is 529.85 million.

(b) Using the census figures for 1950 and 1960, we can find the growth rate as follows:

r = (ln(P₁/P₀))/(t₁ - t₀)

where P₀ is the initial population (in 1950), P₁ is the population after 10 years (in 1960), t₀ is the initial time (1950), and t₁ is the time after 10 years (1960).

Substituting the values, we get:

r = (ln(179/150))/(1960-1950) = 0.028

Using the same exponential model, we get:

P(2000) = [tex]150 * e^{(0.028(2000-1950))} = 150 * e^{1.4} = 244.66[/tex] million (rounded to two decimal places)

Therefore, the predicted population in 2000 is 244.66 million

Learn more about exponential model

brainly.com/question/30954983

#SPJ11