1. Describe the earth's early atmosphere and how oxygen was developed in the atmosphere.

2. Explain the theory of the development of the earth's atmosphere and how oceans were formed.

3. Explain why the compositions of the earth's atmosphere has not changed much for 200 million years.

The splitting apart of an ester in the presence of a strong acid and water is called hydrolysis.

In this process, an ester reacts with water under acidic conditions, breaking the ester bond and forming a carboxylic acid and alcohol as the products. This is different from saponification, neutralization, esterification, and reduction, which are other types of chemical reactions involving esters or related compounds.

Saponification is a type of hydrolysis that involves the hydrolysis of an ester under basic conditions. Neutralization is the reaction between an acid and a base to form salt and water. Esterification is the formation of an ester from a carboxylic acid and an alcohol. Reduction is the gain of electrons or decreases in an oxidation state of a molecule or ion.

Learn more about hydrolysis at https://brainly.com/question/4352413

#SPJ11

The splitting apart of an ester in the presence of a strong acid and water is called hydrolysis.

In this process, an ester reacts with water under acidic conditions, breaking the ester bond and forming a carboxylic acid and alcohol as the products. This is different from saponification, neutralization, esterification, and reduction, which are other types of chemical reactions involving esters or related compounds.

Saponification is a type of hydrolysis that involves the hydrolysis of an ester under basic conditions. Neutralization is the reaction between an acid and a base to form salt and water. Esterification is the formation of an ester from a carboxylic acid and an alcohol. Reduction is the gain of electrons or decreases in an oxidation state of a molecule or ion.

Learn more about hydrolysis at https://brainly.com/question/4352413

#SPJ11

In a titration between sulfuric acid and sodium hydroxide, 25.0 mL of sulfuric acid requires 19.7 mL of 0.720 M NaOH to reach the titration endpoint.H2SO4 + 2NaOH ==> Na2SO4 + 2H2O. The molarity of the sulfuric acid solution is approximately 0.284 M.

To find the molarity of the sulfuric acid solution, we can use the balanced chemical equation and the volume and concentration of the sodium hydroxide solution used in the titration.
First, we need to determine the number of moles of sodium hydroxide used in the titration:
moles of NaOH = volume of NaOH x concentration of NaOH
moles of NaOH = 19.7 mL x 0.720 mol/L
moles of NaOH = 0.0142 mol
Next, we can use the balanced chemical equation to determine the number of moles of sulfuric acid that reacted with the sodium hydroxide:
1 mole of H2SO4 reacts with 2 moles of NaOH
moles of H2SO4 = 0.0142 mol x 1/2
moles of H2SO4 = 0.0071 mol
Finally, we can calculate the molarity of the sulfuric acid solution:
molarity of H2SO4 = moles of H2SO4 / volume of H2SO4
molarity of H2SO4 = 0.0071 mol / 25.0 mL
molarity of H2SO4 = 0.284 M
Therefore, the molarity of the sulfuric acid solution is 0.284 M.
In the given titration, 25.0 mL of sulfuric acid (H2SO4) reacts with 19.7 mL of 0.720 M sodium hydroxide (NaOH) to reach the endpoint. The balanced equation is:
H2SO4 + 2NaOH → Na2SO4 + 2H2O
To find the molarity of the sulfuric acid solution, we'll use the stoichiometry and the volume of NaOH solution used.
Moles of NaOH = Molarity of NaOH * Volume of NaOH
Moles of NaOH = 0.720 mol/L * 0.0197 L = 0.014184 mol
From the balanced equation, the mole ratio between NaOH and H2SO4 is 2:1. Therefore:
Moles of H2SO4 = Moles of NaOH / 2
Moles of H2SO4 = 0.014184 mol / 2 = 0.007092 mol
Now we can calculate the molarity of H2SO4:
Molarity of H2SO4 = Moles of H2SO4 / Volume of H2SO4
Molarity of H2SO4 = 0.007092 mol / 0.025 L = 0.28368 M
The molarity of the sulfuric acid solution is approximately 0.284 M.

To learn more about molarity, click here:

brainly.com/question/8732513

#SPJ11

The reaction to convert copper(II) sulfide (CuS) to copper(II) sulfate (CuSO4) under standard conditions can be determined to be spontaneous or non-spontaneous by calculating the Gibbs free energy change (ΔG°) using the given values of enthalpy change (ΔH°rxn) and entropy change (ΔS°rxn).

The formula to calculate ΔG° is:

ΔG° = ΔH° - TΔS°

where T is the temperature in Kelvin (standard conditions imply 298 K).

Using the provided values, we can calculate:

ΔG°rxn = -718.3 kJ/mol - (298 K)(-0.368 kJ/mol K)
ΔG°rxn = -718.3 kJ/mol + 109.664 kJ/mol
ΔG°rxn = -608.636 kJ/mol

Since ΔG°rxn is negative, the reaction to convert copper(ii) sulfide to copper(ii) sulfate is spontaneous under standard conditions (298 K and 1 atm). This means that the products (copper sulfate) are more stable than the reactants (copper sulfide and oxygen) and the reaction will proceed without any external energy input.

Learn more about entropy change here:

https://brainly.com/question/30691597

#SPJ11

Since the solubility of Ag₂S is 7.43×10⁻¹⁵ g/L, the Ksp value for silver sulfide is approximately 1.07×10⁻⁴⁹.

To calculate the Ksp (solubility product constant) for silver sulfide (Ag2S), first, we need to write the balanced dissolution reaction and expression for the Ksp.

Dissolution reaction: Ag₂S(s) ↔ 2Ag⁺(aq) + S₂⁻(aq)

Ksp expression: Ksp = [Ag⁺]²[S₂⁻]

Given solubility of Ag₂S is 7.43×10⁻¹⁵ g/L, we need to convert this to molar solubility (M).

Molar mass of Ag₂S = (2 x 107.87) + 32.06 = 247.8 g/mol

Molar solubility (s) = (7.43×10⁻¹⁵ g/L) / (247.8 g/mol) = 2.99×10⁻¹⁷ M

In the dissolution reaction, 1 mole of Ag₂S produces 2 moles of Ag⁺ and 1 mole of S₂⁻. Therefore:

[Ag⁺] = 2s = 2(2.99×10⁻¹⁷) = 5.98×10⁻¹⁷ M
[S₂⁻] = s = 2.99×10⁻¹⁷ M

Now we can plug these concentrations into the Ksp expression:

Ksp = (5.98×10⁻¹⁷)²(2.99×10⁻¹⁷) = 1.07×10⁻⁴⁹

So, the Ksp value for silver sulfide is approximately 1.07×10⁻⁴⁹.

Learn more about Ksp here: https://brainly.com/question/27964828

#SPJ11

0.0636 g of NaCl and dissolve it in 50.00 mL of distilled water to prepare the 500 ppm standard solution of sodium.

To prepare 50.00 mL of a 500 ppm standard solution of sodium (Na+) using NaCl, follow these steps:

1. Convert ppm to mg/L: 500 ppm = 500 mg/L (since ppm=mg/L for dilute aqueous solutions).
2. Calculate the amount of Na+ needed in 50.00 mL of solution: (500 mg Na+/L) * (50.00 mL) * (1 L/1000 mL) = 25 mg Na+.
3. Convert mg Na+ to grams: 25 mg * (1 g/1000 mg) = 0.025 g Na+.
4. Calculate the moles of Na+: (0.025 g Na+) / (22.99 g/mol) = 0.00109 mol Na+.
5. Convert moles of Na+ to moles of NaCl:

Since there is a 1:1 ratio of Na+ to Cl- in NaCl, the moles of NaCl are the same as the moles of Na+ which is 0.00109 mol.
6. Calculate the grams of NaCl needed: (0.00109 mol NaCl) * (58.44 g/mol) = 0.0636 g NaCl.
7. Weigh out 0.0636 g of NaCl and dissolve it in 50.00 mL of distilled water to prepare the 500 ppm standard solution of sodium.

Learn more about Nacl https://brainly.com/question/16396215

#SPJ11

The balanced molecular equation for the reaction between hydrobromic acid and barium carbonate is: HBr (aq) + BaCO3 (s) → BaBr2 (aq) + CO2 (g) + H2O (l).

To write the net ionic equation, we need to identify the ions that are involved in the reaction and write them as separate species.

The hydrobromic acid dissociates in water to form H+ and Br- ions:

[tex]HBr (aq) → H+ (aq) + Br- (aq)[/tex]

The barium carbonate dissociates to form Ba2+ and CO32- ions:

[tex]BaCO3 (s) → Ba2+ (aq) + CO32- (aq)[/tex]

In the net ionic equation, we eliminate the spectator ions (ions that appear on both sides of the equation) and write the remaining species:

H+ (aq) + CO32- (aq) → H2O (l) + CO2 (g)

Therefore, the net ionic equation for the reaction between hydrobromic acid and barium carbonate is:

[tex]H+ (aq) + CO32- (aq) → H2O (l) + CO2 (g)[/tex]

Learn more about  acid   here:

https://brainly.com/question/14072179

#SPJ11

It's important to understand the acid's Ka as well. Example: 10.0 grammes of sodium acetate were dissolved in 200.0 mL of 1.00 M acetic acid to create a buffer solution.

Simple sodium acetate buffers have a pH of pH=pKa + log.[Acid][Salt]Acetic acid has a Ka of 1.8 10 5. if 0.1 M = [Salt][Acid]. With the help of the Henderson-Hasselbalch equation, one may determine a buffer's pH: pH (moles of acid/moles of salt) = pKa + log You'll discover the pKa. The -COOH group is the most acidic since it has the lowest pka value. The -COOH group and its conjugate base are in equilibrium at pH = 1.81.

To know more about sodium acetate, click here:

https://brainly.com/question/12924347

#SPJ4

The heat transferred to the water, Q, is: 235725 Joules.

We need to find the heat transferred to the water, Q, when 4.5 kg of water is heated from t1 = 12.5° C to t2 = 25° C, and the specific heat capacity of water is c = 4190 J/(kg⋅K).

1. To find the heat transferred to the water, Q, we use the formula:
Q = mcΔT,
where m is the mass of the water,
c is the specific heat capacity, and
ΔT is the change in temperature.

2. First, calculate the change in temperature, ΔT: ΔT = t2 - t1 = 25° C - 12.5° C = 12.5° C.

3. Next, plug the values into the formula: Q = (4.5 kg) × (4190 J/(kg⋅K)) × (12.5° C).

4. Finally, calculate the value of Q: Q = 4.5 kg × 4190 J/(kg⋅K) × 12.5° C = 235725 J.

To know more about "Specific heat capacity" refer here:

https://brainly.com/question/14646878#

#SPJ11

The curved arrow notation showing the proton transfer between propan-1-ol and HBr can be represented as follows:

CH₃CH₂CH₂OH + HBr → CH₃CH₂CH₂O⁺H + Br⁻

In this reaction, the HBr molecule acts as a Brønsted-Lowry acid, donating a proton (H⁺) to the propan-1-ol molecule. Propan-1-ol, in turn, acts as a Brønsted-Lowry base, accepting the proton to form a positively charged propane-1-oxonium ion (CH₃CH₂CH₂O⁺H) and a negatively charged bromide ion (Br⁻).

The curved arrows are used to show the flow of electrons during the reaction. In this case, the arrow starts at the lone pair of electrons on the oxygen atom of the propan-1-ol molecule and ends at the hydrogen atom bonded to the bromine atom in HBr. This represents the transfer of the proton (H⁺) from HBr to propan-1-ol.

Overall, this reaction is an example of an acid-base reaction, where the acid (HBr) donates a proton (H⁺) and the base (propan-1-ol) accepts the proton to form a new compound.

Learn More about proton transfer

https://brainly.com/question/17063493

#SPJ4

Equations that enable the computation of the carbonate and bicarbonate alkalinities in mg/L as CaCO from measurements of the pH and total alkalinity (A). Since the latter has an unlimited number of dimensions, PCO₂ remains constant.

CaCO₃ is not allowed into the system, causing the carbonate alkalinity. Alkalinity The quantity of ions in water known as alkalinity is what will react to neutralise hydrogen ions (H+). The answer can be substituted for the equilibrium constants or other equations using carbonate, bicarbonate, total alkalinity, and acidity. The acid-neutralizing ability attributed to carbonate solutes is known as carbonate alkalinity. The carbonate system and saltwater will receive the majority of attention, although all the improvements will be applicable to any natural water

To know more about alkalinities, click here:

https://brainly.com/question/31556972

#SPJ4

All of the possibilities meet the criteria of an unknown acid, hence they are all correct options.

Without additional information, the best description of the unknown acid cannot be determined because it could be any of the four options (A. strong diprotic acid, B. strong monoprotic acid, C. weak diprotic acid, D. weak monoprotic acid) depending on its specific chemical properties and behavior in solution.

It is hard to appropriately identify the acid as any of these alternatives without more information. To clearly define an acid, its strength and quantity of acidic protons, as well as its dissociation constant, must be measured or calculated. So, one way we can say that all the options are correct.

To know more about acids, visit,

https://brainly.com/question/25148363

#SPJ4

Complete question - what is the best description of the unknown acid?

A. a strong diprotic acid

B. a strong monoprotic acid

C. a weak diprotic acid

D. a weak monoprotic acid

The most commonly used analytical method to characterize distillation fractions is gas chromatography (GC).

Gas chromatography is a powerful analytical technique that separates and analyzes the components of a mixture based on their vaporization and partitioning behavior between a stationary phase and a mobile phase. It is particularly well-suited for analyzing volatile compounds with different boiling points, which makes it ideal for analyzing distillation fractions. The technique involves injecting a small amount of the sample into a gas chromatograph, which then vaporizes the sample and separates the components based on their affinity for the stationary phase.

While other analytical methods such as boiling point, refractive index, and melting point can also provide useful information about the physical properties of the distillation fractions, gas chromatography is often preferred for its high sensitivity, selectivity, and ability to separate and quantify individual components in a complex mixture.

To conduct this experiment, we can follow the steps:

1. Collect distillation fractions.
2. Perform gas chromatography on each fraction to separate and analyze the volatile compounds.
3. Measure the boiling point, refractive index, and melting point for each fraction as supporting data.
4. Compare the results to known values or standards to identify the components in the fractions.

To know more about Gas Chromatography:

https://brainly.com/question/22851525

#SPJ11

The major organic product of the reaction of carvone with HOCH2CH2OH and HCl is 1-menthol.

The reaction of carvone with HOCH2CH2OH and HCl is a nucleophilic substitution reaction. The hydroxyl group (-OH) of HOCH2CH2OH acts as a nucleophile, attacking the carbonyl group of carvone. The HCl serves as a catalyst in this reaction.

The result is the formation of 1-menthol, which is the major organic product. 1-menthol is an organic compound with a menthol odor and is commonly used in various applications, such as flavoring agents, perfumes, and medicinal products due to its cooling sensation and soothing effects on the skin.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

To keep chickens warm in a shed on a cold night, the best lamp to use is an infrared heat lamp.

Here's a step-by-step explanation on how to use the heat lamp effectively:

1. Choose an infrared heat lamp: These lamps emit both light and heat, providing a safe and efficient heat source for your chickens. Make sure to select a lamp with the appropriate wattage (usually around 150-250 watts) for the size of your shed.

2. Position the heat lamp: Hang the heat lamp securely from the ceiling of the shed or mount it on a wall, ensuring it is at a safe distance from any flammable materials. The lamp should be positioned approximately 18-24 inches above the floor, depending on the height of your chickens.

3. Adjust the lamp's angle: Aim the heat lamp towards the chickens' roosting area, providing a warm spot for them to rest during the night. Make sure the lamp is not directly above their heads, as this could cause discomfort or overheating.

4. Monitor the temperature: Use a thermometer to check the temperature in the shed regularly. It should ideally be maintained between 45-50°F (7-10°C) for adult chickens. Adjust the distance between the heat lamp and the floor or the wattage of the bulb as needed to maintain the desired temperature.

5. Observe the chickens' behavior: If the chickens appear to be huddled close to the heat lamp or are showing signs of discomfort, adjust the lamp's position or wattage accordingly. If they are avoiding the lamp altogether, it might be too warm and the distance between the lamp and the floor should be increased.

To know more about infra red heat lamp refer to

https://brainly.com/question/11889190

#SPJ11

The charge balance equation for an aqueous solution of MnCl₂ that ionizes to Mn₂⁺, Cl⁻, MnCl⁺, and MnOH⁺ is: 2[Mn₂⁺] + [Cl₋] + [MnCl⁺] + [MnOH⁻] = 2[Cl⁻] + 2[MnCl⁺] + [OH⁻]

To select the charge balance equation for an aqueous solution of MnCl2₂ that ionizes to Mn₂⁺, Cl⁻, MnCl, and MnOH, we need to account for the charges of all the ions present in the solution. Here's the charge balance equation

[Mn₂⁺] + [MnOH] = 2[Cl⁻] + [MnCl]

In this equation:

The equation balances the positive and negative charges in the solution, ensuring that the total charge is neutral.

Learn more about charge balance: https://brainly.com/question/10510662

#SPJ11

The amount of particles affect the rate of ice melting. The more particles in a container, the slower the ice melts. This is because collisions between the particles reduce the freezing point of the solution.

The "colligative properties" affect the melting rate of ice through the number of particles. The number of solute particles in a solution determines its colligative properties. The solute particles mix with the water as the ice melts. More particles slow the melting of the ice.

Particles lower the freezing point of a solution. Ice melts when it touches a substance that does not freeze. This will continue until the substance freezes. The freezing point drops and the solution takes longer to freeze as the number of particles increases.

When a solute is added to water, the ice melts more slowly. The freezing point of the solution is lower. However, fewer particles in the container will freeze faster, accelerating the melting.

To know more about ice melting,

https://brainly.com/question/31654033

https://brainly.com/question/29763008

The pH of the solution composed of 90.0 mL of 0.345 M NaOH and 50.0 mL of 0.123 M lactic acid, with a Ka of 1.38x[tex]10^-^4[/tex], is 3.86.

To solve this problem, we need to use the equation for the dissociation of lactic acid:

Hc₃h₅o₃ + H2O ⇌ C₃H₅O₃⁻ + H₃O⁺

We can use the Ka expression for lactic acid to determine the concentration of H₃O⁺:

Ka = [C₃H₅O₃⁻][H₃O⁺] / [Hc₃h₅o₃]

We are given the Ka value for lactic acid, the initial concentrations of NaOH and lactic acid, and the volumes of the solutions. First, let's determine the amount of lactic acid that reacts with NaOH:

n(Hc₃h₅o₃) = (50.0 mL)(0.123 mol/L) = 0.00615 mol

n(NaOH) = (90.0 mL)(0.345 mol/L) = 0.03105 mol

Since NaOH reacts with H₃O⁺  in the following reaction,

NaOH + H₃O⁺ → Na+ + 2H₂O

we can assume that the amount of H₃O⁺ that is formed is equal to the amount of lactic acid that reacts with NaOH.

n(H₃O⁺) = 0.00615 mol

We can use this value to determine the concentration of H₃O+:

Ka = [C₃H₅O₃⁻][H₃O⁺] / [Hc₃h₅o₃]

1.38x[tex]10^-^4[/tex] = [0.00615 mol/L][H₃O⁺] / [0.00615 mol/L]

[H₃O⁺] = Ka × [Hc₃h₅o₃] / [C₃H₅O₃⁻]

[H₃O⁺] = (1.38x[tex]10^-^4[/tex]) × (0.00615 mol/L) / (0.00615 mol/L)

[H₃O⁺] = 1.38x[tex]10^-^4[/tex] M

Finally, we can use the definition of pH to calculate the pH of the solution:

pH = -log[H₃O⁺]

pH = -log(1.38x[tex]10^-^4[/tex])

pH = 3.86

Therefore, the pH of the solution is 3.86.

Learn more about Lactic acid

brainly.com/question/24976306

#SPJ11

The nuclear charge increases in that direction.

Option D is correct.

Atoms often have a period-long reduction in atomic radius from left to right. There are a few minor deviations, such as the oxygen radius slightly exceeding the nitrogen radius. In a short amount of time, protons are added to the nucleus at the same time that electrons are added to the main energy level.

The valence shell size stays constant as we move from left to right, despite the nuclear charge increasing. As a result, the element's atomic size falls from left to right during any time.

To know more about  nuclear charge visit:-

https://brainly.com/question/13664060

#SPJ1

Unfortunately, without knowing the Ka or Kb values of the relevant species, we cannot directly calculate the OH or pH of the solutions given.

However, we can make some general observations based on the identities of the species involved.

a) NaBr is a salt of a strong base (NaOH) and a strong acid (HBr). Therefore, NaBr will not significantly affect the pH of the solution, and the OH and pH will be determined by the solvent and any other solutes present.

b) NaHS is a salt of a weak base ([tex]HS^-[/tex]) and a strong acid (NaOH). Therefore, NaHS will undergo hydrolysis in water, resulting in the production of [tex]OH^-[/tex] ions and a decrease in pH. The exact values of OH and pH will depend on the Ka value of [tex]HS^-[/tex] and the initial concentration of NaHS.

c) [tex]NaNO_{2}[/tex] and [tex]Ca(NO_{2} )_{2}[/tex] are both salts of weak acids ([tex]HNO_{2}[/tex] and [tex]HNO_{2}[/tex], respectively) and strong bases (NaOH and [tex]Ca(OH)_{2}[/tex], respectively). Both salts will undergo hydrolysis to some extent, resulting in the production of [tex]OH^-[/tex] ions and a decrease in pH. The exact values of OH and pH will depend on the Ka values of [tex]HNO_{2}[/tex] and [tex]HNO_{3}[/tex] and the initial concentrations of [tex]NaNO_{2}[/tex] and [tex]Ca(NO_{2} )_{2}[/tex].

Learn more about  Ka or Kb values

https://brainly.com/question/29426902

#SPJ4

The correct answer is option A. salt and water are formed at the equivalence point when titrating a strong acid with a strong base.

Titration is a technique used in chemistry to determine the concentration of a solution (the analyte) by reacting it with a solution of a known concentration (the titrant) of another substance. A measured amount of the titrant is added to the analyte until the reaction is complete, at which point the amount of titrant used is used to calculate the concentration of the analyte. Titration is commonly used in acid-base chemistry to determine the concentration of an acid or a base, but it can also be used for other types of reactions.

Learn more about titration here:

https://brainly.com/question/29786843

#SPJ1

Answer:

quite literally in the name

The order of decreasing melting points is:
1. BeO > 2. MgS > 3. NaF >4. K2S > 5. CsI

To rank the following ionic compounds in order of decreasing melting point, we need to consider the strength of the ionic bonds within the compounds. Stronger ionic bonds result in higher melting points, while weaker ionic bonds lead to lower melting points. Here's the list of compounds:
1. MgS
2. K2S
3. CsI
4. BeO
5. NaF
Ionic bond strength is influenced by both the charges of the ions and the size of the ions. In general, the higher the charges and the smaller the ions, the stronger the ionic bond.
1. BeO (melting point: 2,530 °C) - [tex]Be^{2+}[/tex] and [tex]O^{2-}[/tex] have high charges and small ionic radii, leading to strong ionic bonds.
2. MgS (melting point: 2,502 °C) - [tex]Mg^{2+}[/tex] and [tex]S^{2-}[/tex] have high charges but larger ionic radii than BeO, resulting in slightly weaker ionic bonds.
3. NaF (melting point: 996 °C) - [tex]Na^{+}[/tex] and [tex]F^{-}[/tex] have lower charges than the previous compounds, leading to weaker ionic bonds.
4. K2S (melting point: 891 °C) - [tex]K^{+}[/tex] and [tex]S^{2-}[/tex] have larger ions than NaF, leading to weaker ionic bonds despite similar charges.
5. CsI (melting point: 621 °C) - [tex]Cs^{+}[/tex] and [tex]I^{-}[/tex] have the largest ions of these compounds, resulting in the weakest ionic bonds and lowest melting point.

To learn more about ionic bond click here https://brainly.com/question/11527546

#SPJ11

The delta G (naught) for the hydrolysis of glucose-6-p at pH 7 and temperature 298K is 99.88 kJ/mol.

To calculate delta G (naught) for the hydrolysis of glucose-6-p at pH 7 and 298K, we need to use the equation:
delta G (naught) = -RT ln(K)
where R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (298K), and K is the equilibrium constant.
The equilibrium constant for the hydrolysis of glucose-6-p can be expressed as:
K = [glucose][phosphate] / [glucose-6-p]
At pH 7, the concentration of H+ ions is [tex]10^{-7} M[/tex], so we can assume that [H+] is negligible and [tex][H_2O][/tex] is constant. Therefore, we can simplify the expression for K as:
K = [glucose][phosphate] / [glucose-6-p] * [tex][H_2O][/tex]
We can use the standard free energy of formation values to calculate the standard free energy change for the reactants and products:
delta G (naught) = -RT ln(K) = -RT ln([glucose][phosphate]/[glucose-6-p] * [tex][H_2O][/tex])
delta G (naught) = -RT ln([glucose][phosphate]) + RT ln([glucose-6-p] * [tex][H_2O][/tex])
delta G (naught) = -RT ln([glucose][phosphate]) + RT ln([glucose-6-p]) + RT ln([tex][H_2O][/tex])
Substituting the values, we get:
delta G (naught) = [tex]-8.314 J/mol*K * 298K * ln(1) + (-8.314 J/mol*K * 298K * ln(1.8*10^{-10})) + (-8.314 J/mol*K * 298K * ln(55.5))[/tex]
delta G (naught) = [tex]-8.314 J/mol*K * 298K * (-22.81) + (-8.314 J/mol*K * 298K * 13.8) + (-8.314 J/mol*K * 298K * (-2.90))[/tex]
delta G (naught) = 59.54 kJ/mol + 32.66 kJ/mol + 7.68 kJ/mol
delta G (naught) = 99.88 kJ/mol

To learn more about standard free energy click here https://brainly.com/question/6556762

#SPJ11

Dopamine is the chemical in the brain that increases when someone wins a poker hand, a cocaine inhalation, or a shot of whiskey.

Dopamine is a hormone and neurotransmitter. It assumes a part in multitudinous significant body capabilities, including development, memory, and enjoyable prize and alleviation.

High or low degrees of dopamine are related to many emotional well-being and neurological ails. Dopamine situations can be raised through a variety of conditioning, including sunbathing, exercising, planning, harkening to music, and getting enough sleep.

Generally, a decent eating routine and way of life can go far in expanding your body's normal creation of dopamine and aiding your mind with working at its ideal.

To know more about Dopamine,

brainly.com/question/24803971

#SPJ4

Answer:

The two key ways to identify chemical hazards are to carefully study both the product packaging AND the product's SDS.

High temperatures are needed to convert N₂ and O₂ to NO because they provide the energy required to break the strong triple bond in N₂ and the double bond in O₂, allowing the atoms to react and form NO.

Nitrogen (N₂) and oxygen (O₂) molecules have strong bonds, with a triple bond between the two nitrogen atoms and a double bond between the two oxygen atoms. In order to form nitric oxide (NO), these bonds need to be broken, and new bonds between nitrogen and oxygen atoms need to be formed. The reaction has an enthalpy change (ΔH) of 180 kJ, indicating that it is an endothermic reaction, meaning it requires energy to proceed. High temperatures provide the necessary energy to break the strong bonds in N₂ and O₂ molecules and overcome the activation energy barrier for the reaction to take place. Once the bonds are broken, nitrogen and oxygen atoms can react to form NO, which is a component of polluted air.

Learn more about enthalpy here:

https://brainly.com/question/16720480

#SPJ11

The value of Kp at a given temperature can be calculated from the value of Kc using the ideal gas law. The relationship between Kp and Kc is given by:

[tex]Kp = Kc(RT)^{\vartriangle n[/tex]

In this case, the reaction involves two moles of gas on the reactant side (Cl₂ and CO) and three moles of gas on the product side (COCl₂). So Δn = 3 - 2 = 1.

Given values:

Kc = 19.5

T = 520.0°C = (520.0 + 273.15) K = 793.15 K (temperature in Kelvin)

Now, let's plug in the values and calculate Kp:

[tex]Kp = Kc(RT)^{\vartriangle n[/tex]

[tex]Kp = 19.5 * (0.0821) * (793.15)^1[/tex]

[tex]Kp \approx 13.8[/tex]

So, the value of Kp at 520.0°C for the given reaction is approximately 13.8.

Learn more about ideal gas law here:

https://brainly.com/question/30458409

#SPJ11

Solid potassium sulfite is slowly added to 150 ml of a silver nitrate solution until the concentration of sulfite ion is 0.0590 m. the maximum amount of silver ion remaining in solution is 0.00482m

To determine the maximum amount of silver ion remaining in solution, we will use the solubility product constant (Ksp) for silver sulfite (Ag₂SO₃). The Ksp value for silver sulfite is 1.5 × 10⁻⁵. Here's a step-by-step explanation:
1. Write the balanced chemical equation for the reaction:
AgNO₃ (aq) + K₂SO₃ (s) ⇒ 2 Ag₂SO₃ (s) + 2 KNO₃ (aq)
2. Write the solubility product expression for Ag₂SO₃:
Ksp = [Ag+]² [SO3²-]
3. Given the concentration of sulfite ion [SO₃-] = 0.0590 M, we can find the concentration of silver ion [Ag+].
Ksp = 1.5 × 10⁻⁵ = [Ag⁺]² [0.0590]
4. Solve for [Ag⁺]:
[Ag⁺]² = (1.5 × 10⁻⁵) / 0.0590
[Ag⁺] = √((1.5 × 10⁻⁵) / 0.0590) =0.00482 M
So, the maximum amount of silver ion remaining in solution is 0.00482 M.

Learn more about solubility here

https://brainly.com/question/28170449

We do not expect to see resonance for carbon 2 of 2-butanone in a DEPT-45 spectrum because it does not have any hydrogen atoms attached to it. The correct option is "none of these". let's first understand the DEPT-45 technique and the structure of 2-butanone.

DEPT-45 (Distortionless Enhancement by Polarization Transfer) is a specialized NMR technique used to determine the number of hydrogen atoms attached to each carbon atom in a molecule. It provides information about CH, CH2, and CH3 groups.

2-butanone, also known as methyl ethyl ketone (MEK), has the molecular formula CH3C(O)CH2CH3. Carbon 2 is the carbonyl carbon (C=O) in this molecule.

In a DEPT-45 spectrum, only CH and CH3 groups are observed as positive signals, while CH2 groups appear as negative signals. Since carbon 2 (C=O) in 2-butanone does not have any hydrogen atoms attached to it, we would not expect to see a resonance for carbon 2 in a DEPT-45 spectrum. Therefore, the correct answer is "none of these."

To know more about hydrogen atoms refer here:

https://brainly.com/question/29695801#

#SPJ11

Based on the mentioned molar ratio, 0.050 L (or 50.0 mL) of 0.250 M Ba(OH)2 solution is needed to fully react with 100.0 mL of 0.500 M HCl solution.

The reaction between Ba(OH)2 and HCl has the following balanced chemical equation:

[tex]Ba(OH)_2 + 2 HCl - > BaCl_2 + 2 H_2O[/tex]

Given:

Molarity of Ba(OH)2 solution (M1) = 0.250 M

Volume of Ba(OH)2 solution (V1) = ?

Molarity of HCl solution (M2) = 0.500 M

Using the stoichiometry of the reaction

1 mole Ba(OH)2 / 2 moles HCl = V1 L / 0.100 L

Solving for V1:

[tex]V1 = (1 mole Ba(OH)2 / 2 moles HCl) x 0.100 LV1 = 0.050 L[/tex]

to know more about molar ratio here

brainly.com/question/17920577

#SPJ1