The correct answer about density is 2.91 g/mL.
What is Density?The measure of how densely a substance is packed together is called density. In simple terms, we can say that density is mass per unit volume.It can be denoted by the symbols 'D' or 'ρ'.The formula of Density is ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.The SI unit Density is Kg/m³We can use g/cm³ for solids, g/ml for liquids, and g/L for gases for our convenience.
What are the Applications of Density?You may use separation procedures with the assistance of knowledge of the densities of two substances.For example, Oil leaks from an oil tank into the ocean, where the less dense oil drops begin to float on the sea.Another typical application of density is determining whether an object will float on water or not. Due of the disparity in densities, ships float and submarines dive.
How to solve this question?
Density = Mass / Volume
Density = 58.2 g / 20 mL
Density = 2.91 g/mL
Thus, we can conclude that by dividing mass of the object by volume of the object, we will find the density of the object.
Learn more about Density here:
https://brainly.com/question/6838128
#SPJ2
Hurricanes are powered by heat energy in the atmosphere and the ocean. Typically, one hurricane uses an amount of heat roughly equal to Z thousand atomic bombs. If the excess heat built up in Earth's atmosphere since 1850 went into producing hurricanes, about how many more hurricanes might we expect in the world every year?
Answer:
In an year about 6 major hurricanes and 3 minor storms occurs.
Explanation:
Hurricanes are increasing in number and frequency to the increasing impact of global warming. As current research states that climate change in the tropics results in an increased storm frequency. The presence of extra heat in the air or the oceans form the stoma that leads to the production of such energy. According to o the 200-2007 data shows in the huge increase in the storm frequency and this suggests the impact of climate warming.If a motorcycle, a car, and a big rig are all moving with a velocity of 100 km/h, which vehicle has the greatest momentum? A motorcycle and rider. A small car. A large 18 wheeler truck.
Answer:
The big rig.
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
In this scenario, a motorcycle, a car, and a big rig are all moving with a velocity of 100 km/h. Thus, the vehicle which has the greatest momentum is the big rig because its mass is intuitively or logically greater than that of the other vehicle.
Generally, momentum is directly proportional to the mass of a physical object or body.
Answer: A large 18 wheeler truck.
Explanation: Momentum is the measure of the motion of an object found by multiplying the object’s mass and velocity. Momentum is directly proportional to the object's mass and also its velocity. So, the greater an object's mass or the greater its velocity, the greater its momentum. Therefore, since the truck is bigger, it has the greatest mass. This means that the truck the greatest momentum. Correct on Edg 2020.
PLEASE GIVE BRAINLIEST AND RATE MY ANSWER :)
In asexual reproduction the new plant is identical to its parent.
true
false
Answer:
YES
Explanation:
Asexual means the plant is identical to the parent
Answer:
true
Explanation: Asexual reproduction produces plants that are genetically identical to the parent plant because no mixing of male and female gametes takes place.
I need help again!!!!!! Due today!!!! NO LINK PLEASE
Answer:
The Acceleration of the object = 6.4 m/s²
Explanation:
Mass of block (m) = 5 kg
Action force on block, (F₁) = 40 N
To Find:
Acceleration of the object (a) = ?
Required solution:
Frictional force opposing the motion (F₂) = 8 N
Here in this question we have to find Acceleration of the object. So, firstly we have to find Net force of block after that we will find Acceleration of the object on the basis of conditions given above
⇒ Net force = Action force on block - Opposing friction force
⇒ F = F₁ - F₂
⇒ F = 40 - 8
⇒ F = 32 N
Now, we have to two elements that used in formula, Net force and Mass of block.
Net force of the block (F) = 32 N
Mass of block (m) = 5 kg
And we have to find Acceleration of the object.
We can find Acceleration of the object by using the Second law of Newton which says F = ma
Here,
F is the Force in N.
m is the Mass in kg.
a is the Acceleration in m/s².
So let's find Acceleration (a) !
† From second law of Newton
⇛ F = ma
⇛ a = F/m
⇛ a = 32/5
⇛ a = 6.4 m/s²
1. Find the acceleration of an object when the force is 5.2 N and the mass is 2.6 x 10kg.
Answer:
F=ma
5.2N=26a
a=5.2÷26=0.2
Answer:
0.2 metre square
Explanation:
acceleration=force/mass
When a pot of water sits on a hot stove the metal is He did and then transferred into heat to the world of student claims that conduction is the only type feet transfer occurring which statement explains why the students idea is incorrect
Answer:
Hello your question is poorly written hence I will just give the difference between conduction and convection
answer :
Conduction occurs when there is direct contact between solids and source of heat. while convection occurs when there is transfer of thermal energy due to movement of liquid or gas
Explanation:
when a pot of water is placed on a hot stove the pot is heated through conduction because the metal pot is in direct conduct with the heat from the stove ( which is the primary source of heat in this scenerio ).
while the heat transfer from the hot pot to the water is executed through convection this is because heat transfer via convection requires the movement of liquid or gas. as the warmer liquid moves over to the top the cooler liquid goes below inside the pot that way the whole liquid becomes warm .
The part of the lithosphere under the ocean are less dense then those under the continents. True or false
Answer:
False
Explanation:
The outer part of the Earth that is hard and solid is termed as lithosphere. It is the outermost part of the Earth's surface. The lithosphere covered under the oceans is the oceanic lithosphere while the lithosphere comprising the continental area is the continental lithosphere. Oceanic lithosphere is denser than the continental lithosphere because of the thin layer of the Earth that exists under the oceans.
Use the drop-down menus to identify the part of the ear that performs each function.
Changes sounds to signals that the brain can understand: (Inner ear, middle ear, or outer ear)
Collects sound: (Inner ear, middle ear, or outer ear)
Passes sounds through vibrations: (Inner ear, middle ear, or outer ear)
Answer:
The answers to this question is:
1. inner ear
2. outer ear
3. middle ear
Explanation:
Hope that helps!
Answer:
inner, outer, middle
Explanation:
A roller coaster car is traveling at a constant 3 m/s when it reaches a downward slope. On the slope, the car accelerates at a constant rate of 4.5 m/s 2 . The length of the slope is 45 meters. A) Find the velocity of the car at the bottom of the hill. B) Find the time of travel.
Answer:
Velocity of the car at the bottom of the slope: approximately [tex]20.3\; \rm m \cdot s^{-2}[/tex].
It would take approximately [tex]3.9\; \rm s[/tex] for the car to travel from the top of the slope to the bottom.
Explanation:
The time of the travel needs to be found. Hence, make use of the SUVAT equation that does not include time.
Let [tex]v[/tex] denote the final velocity of the car. Let [tex]u[/tex] denote the initial velocity of the car.Let [tex]a[/tex] denote the acceleration of the car. Let [tex]x[/tex] denote the distance that this car travelled.[tex]v^2 - u^2 = 2\, a\cdot x[/tex].
Given:
[tex]u = 3\; \rm m \cdot s^{-1}[/tex].[tex]a = 4.5\; \rm m \cdot s^{-2}[/tex].[tex]x = 45\; \rm m[/tex].Rearrange the equation [tex]v^2 - u^2 = 2\, a\cdot x[/tex] and solve for [tex]v[/tex]:
[tex]\begin{aligned}v &= \sqrt{2\, a \cdot x + u^2} \\ &= \sqrt{2 \times 4.5\; \rm m \cdot s^{-2} \times 45\; \rm m + \left(3\; \rm m \cdot s^{-1}\right)^{2}} \\ &\approx 20.3\; \rm m \cdot s^{-1}\end{aligned}[/tex].
Calculate the time required for reaching this speed from [tex]u = 3\; \rm m \cdot s^{-1}[/tex] at [tex]a = 4.5\; \rm m \cdot s^{-2}[/tex]:
[tex]\begin{aligned}t &= \frac{v - u}{a} \\ &\approx \frac{20.3\; \rm m \cdot s^{-1} - 3\; \rm m \cdot s^{-1}}{4.5\; \rm m \cdot s^{-2}} \approx 3.9\; \rm m \cdot s^{-1}\end{aligned}[/tex].
The linear expansivity of metal P is twice that of another metal Q. When these materials are heated through the same temperature change, their increase in length is the same. Calculate the ratio of the original length of P to Q
Answer:
The answer is 1:2.
The negative work done is equal to the difference in the......... Electric potential energy Electric flux Electric potential Electric dipole
Answer:
Electric potential energy
Explanation:
The Electric potential energy of a system is less than that carried out by electrostatic forces during the development of the system (as long as charges are initially cut infinitely).
The change in potential energy between an initial and final configuration is equal to minus the work done by the electrostatic forces.
PLEASE HELPPPPP I WILL GIVE POINTS AND BRAINIEST
Answer:
Graph A
Explanation:
I hope this is right
Two beakers are at the same temperature. One beaker has more water than the other. Which one contains more heat? Explain why.
Answer:
I would say the beaker with less water.
Explanation:
I was say this because while they are the same temperature the beaker with more water still has to fluctuate the heat or cold. They do this at the same speed but since there is less water in one beaker it finishes faster where as the beaker with more water will finish later.
26. A liquid with a low viscosity
a. has a definite shape
b. fills its container
c. flows quickly
d. flows slowly
Answer:
flows quickly and needs to be like paper
Answer:
c
Explanation:
it flows very quickly since it has a low viscosity
Which image shows a situation where conduction occurs?
A box full of pieces of metal.
A woman holds a steaming mug.
A woman holds a frying pan above a stove while stirring.
Answer: A woman holds a steaming mug
Explanation:
Just did it
Which is an example of a projectile?
An arrow stored in a quiver
A trapeze artist hanging from a swing
A bullet loaded into a gun's chamber
A child jumping off of a swing set
Answer: A child jumping off of a swing set
Explanation: A projectile is any object thrown into the air, so the child is the only thing in the air thats moving.
Standing and holding a barbell that has a mass of 100kg at a height of 2m involves being done on the barbell to maintain
the position.
Answer:
I'm not sure but, this video's pretty cool: gestyy.com/eyRkH2
Explanation:
If the area of a concrete slap weighing 300n is 400cm2 ,how much pressure can it apply when kept on the ground
Answer:
7500 N/m²
Explanation:
From the question given above, the following data were obtained:
Force (F) = 300 N
Area (A) = 400 cm²
Pressure (P) =?
Next, we shall convert 400 cm² to m². This can be obtained as follow:
1×10⁴ cm² = 1 m²
Therefore,
400 cm² = 400 cm² × 1 m² / 1×10⁴ cm²
400 cm² = 0.04 m²
Finally, we shall determine the pressure. This can be obtained as follow:
Force (F) = 300 N
Area (A) = 0.04 m²
Pressure (P) =?
P = F/A
P = 300 / 0.04
P = 7500 N/m²
thuli wants to buy tv for R8500.a bank offers to loan her the money at an interest rate of 5%.she decides to pay the tv off in 3 years calculate the simple interest she will have to pay .also calculate the total she will pay
Answer:
The total she has to pay is R8500 plus the 5% interest.
PLEASE ADD BRAINEEST
Determina la fuerza de acción que se presenta entre dos cuerpo cuyas masas son 500 Kg y 900 Kg, si ambos cuerpos se encuentran separados a una distancia de 2 m. Datos Fórmula Sustitución y Operaciones Resultado
Answer:
F = 7.50 10⁻⁶ N
Explanation:
The force of attraction between two bodies is given by the law of universal gravitation
F = [tex]G \frac{m_1m_2}{r^2}[/tex]
where m₁ and m₂ are the masses of the hides, r the distance that separates them and G the constant of attraction that is worth 6.67 10⁻¹¹ N m²/kg²
let's calculate
F = 6.67 10⁻¹¹ 500 900/2²
F = 7.50 10⁻⁶ N
how much water makes up earth in percentages? thx?
Answer:
71%
Explanation:
A cloud is drifting across the sky at a constant velocity of 724metersperminute to the east. It is at an altitude of 9,200 meters. How far will the cloud move in 12.5minutes?
Answer:
The cloud moves 9050 meters to the east in 12.5 minutes.
Explanation:
Let suppose that mass of the cloud is negligible. meaning that effects of gravity are negligible and that altitude of the cloud remains constant. If the cloud drifts at constant velocity, travelled distance is defined by following formula:
[tex]\Delta s = v\cdot \Delta t[/tex] (1)
Where:
[tex]v[/tex] - Velocity, in meters per second.
[tex]\Delta t[/tex] - Time, in seconds.
If we know that [tex]v = 724\,\frac{m}{min}[/tex] and [tex]\Delta t = 12.5\,min[/tex], then the travelled distance after 12.5 minutes is:
[tex]\Delta s = 9050\,m[/tex]
The cloud moves 9050 meters to the east in 12.5 minutes.
plz help me
Your friend has a mass of 70 kg and is running at a velocity of 3 m/s. What is their kinetic energy?
Answer:
TINAAA
Explanation:
Please help /Show work
A business jet of mass 24000kg takes off when the thrust for each of two engines is 34000N. Find the acceleration.
Answer:
1.42 m/s²
Explanation:
From the question,
F = ma.................... Equation 1
Where F = force, m = mass of the jet, a = acceleration of the jet
make a the subject of the equation
a = F/m................. Equation 2
Given: F = 34000 N, m = 24000 kg
Substitute into equation 2
a = 34000/24000
a = 1.42 m/s²
Suppose you have a 34.9 m length of copper wire. If the wire is wrapped into a solenoid 0.240 m long and having a radius of 0.0510 m, how strong is the resulting magnetic field in its center when the current is 11.0 A?
Answer:
the strength of the magnetic field inside the solenoid is 6.278 x 10⁻³ T.
Explanation:
Given;
length of the wire, = 34.9 m
length of solenoid, L = 0.24 m
radius of the solenoid, r = 0.051 m
current in the solenoid, I = 11.0 A
The number of turns of the wire is calculated as follow;
[tex]N = \frac{34.9}{2\pi \times 0.051} = 109 \ turns[/tex]
The strength of the magnetic field inside the solenoid is calculated as follows;
[tex]B = \mu_0 (\frac{N}{L} )I\\\\B = 4\pi \times 10^{-7} \times (\frac{109}{0.24} )\times 11.0 \\\\B = 6.278 \times 10^{-3} \ T[/tex]
Therefore, the strength of the magnetic field inside the solenoid is 6.278 x 10⁻³ T.
The resistivity of a given wire of cross sectional area 0.7mm^2 is 4.9×10^-4ohms mm.Calculate the resistance of a 2ohms length of the wire
Answer:
the resistance of the wire is 1.4 x 10⁻³ ohms.
Explanation:
Given;
resistivity of the wire, ρ = 4.9 x 10⁻⁴ ohms.mm
cross sectional area of the wire, A = 0.7 mm²
length of wire, L = 2 mm
The resistance of the wire is calculated as follows;
[tex]R = \frac{\rho L}{A} \\\\R = \frac{4.9 \times 10^{-4} \times 2}{0.7} \\\\R = 1.4\times 10^{-3} \ ohms[/tex]
Therefore, the resistance of the wire is 1.4 x 10⁻³ ohms.
A small pebble and one large boulder start at the same height and begin rolling down the side of a mountain. Which object would have less kinetic energy as it crashes on the road at the bottom of the mountain? Justify your selection.
Answer:
The small pebble
Explanation:
Since the potential energy, P.E lost equals kinetic energy, K.E gained,
P.E = K.E
P.E = mgh = K.E
So, K.E = mgh where g = acceleration due to gravity and h = height of drop
Since h and g are constant
K.E ∝ m
So, the kinetic energy of the object is directly proportional to its mass. Thus, the object with the smaller mass has the lesser kinetic energy.
Since the object with the smaller mass is the small pebble, so the small pebble would have less kinetic energy as it crashes on the road at the bottom of the mountain.
638 nm light passes through a single
slit. The third (m = 3) diffraction
minimum occurs at an angle of 5.48º.
What is the width of the slit?
which class question is this
Answer:
2.00
Explanation:
Move the sinθ to the right.
You and a friend each apply 500 N of force to move a cement block 50 cm. How much work was done on the cement block?
Answer:
W = 500 J
Explanation:
Work is defined by
W = F . x
if we develop the dot product
W = F x cos θ
where is the angle between the force and the displacement, in this case the angle is zero, so cos 0 = 1
W = F x
indicate that each person applies a force of 500 N, so the total force is
F = 1000 N
let's reduce the distance to the SI system
x = 50 cm = 0.50 m
let's calculate
W = 1000 0.50
W = 500 J